The (S−1,S) inventory model and its counterparts in queueing theory

We explore the relationship between the ($S?1,S$) inventory model and three well-known queueing models: the Erlang loss system, the machine-repair model and a two-node Jackson network. Exploiting this relationship allows us to obtain key performance measures of the ($S?1,S$) model, like the so-called virtual outdating time, the number of items on the shelf in steady state, the long-run rate of unsatisfied demands and the distribution of the empty shelf period.     

Flamelet structure in turbulent premixed swirling oxy-combustion of methane

Two key flame macrostructures in swirling flows have been observed in experiments of oxy-combustion (as well as air-combustion); as the equivalence ratio is raised, the flame moves from being stabilized on just the inner shear layer (Flame III) to getting stabilized on both the inner and outer shear layers (Flame IV). We report results of an LES investigation of two different inlet oxy-fuel mixtures, in a turbulent swirling flow at $\text{Re}=20,000,$ that capture these two macrostructures. Previous work on the effects of heat loss have mostly focused on its impact on macro-scale observations. In this paper, we examine how heat loss impacts the flame microstructures as well for these two macrostructures. For both flames, the flamelet structure, as represented by a scatter plot of the normalized fuel concentration against the normalized temperature, depends on whether the combustor walls are adiabatic or non-adiabatic. For the adiabatic case, the flamelets of both macrostructures behave like strained flames. When wall heat transfer is included, Flame III microstructure is more bimodal. Since this flame extends farther downstream and part of it propagates along the walls, heat transfer has a greater impact on it’s microstructure. These results show that heat loss impacts not just the macro properties of the flame such as its shape or interactions with the wall, but also fundamentally changes its internal structure. Scatter plots of the turbulent flames are constructed and compared to different 1D laminar flame profiles (e.g., strained or with heat loss), and comparisons suggest the important role of the wall thermal boundary conditions in the accurate simulations of combustion dynamics and interpretations of experimental data, including data reduction and scaling.     

Irreversible Structural Changes of Copper Hexacyanoferrate Used as a Cathode in Zn-Ion Batteries

The structural changes of copper hexacyanoferrate (CuHCF), a Prussian blue analogue, which occur when used as a cathode in an aqueous Zn-ion battery, are investigated using electron microscopy techniques. The evolution of Zn_xCu_1−xHCF phases possessing wire and cubic morphologies from initial CuHCF nanoparticles are monitored after hundreds of cycles. Irreversible introduction of Zn ions to CuHCF is revealed locally using scanning transmission electron microscopy. A substitution mechanism is proposed to explain the increasing Zn content within the cathode material while simultaneously the Cu content is lowered during Zn-ion battery cycling. The present study demonstrates that the irreversible introduction of Zn ions is responsible for the decreasing Zn ion capacity of the CuHCF cathode in high electrolyte concentration.     

Spectral,Optical and Mechanical studies on pure and thiourea doped ammonium di-hydrogen phosphate NLO single crystals

Pure and thiourea substituted single crystals of ammonium di-hydrogen phosphate have been grown from aqueous solution by isothermal solvent evaporation technique. Doped crystal exhibits prominent changes in physical and chemical properties. Single crystal XRD analyses of the samples are carried out and the results are compared. FTIR and UV–vis–NIR spectral analyses have been employed to identify the presence of various functional groups and the UV cut-off range in the grown crystals. Density measurements have been made and Photoconductivity studies revealed the negative photo conducting nature. Hardness measurement shows that the mechanical strength of the doped crystal is high when compared to pure ammonium di-hydrogen phosphate. The dielectric response of the samples has been studied in the frequency range 100 Hz–5 MHz at room temperature and the results are discussed.     

High frequency circular translation pin-on-disc wear testing of UHMWPE using a ball-on-flat contact along a hypotrochoidal track

To intensify experimental research within the field of orthopaedic tribology, a three-station, dual motion, high frequency (25.3 Hz) circular translation pin-on-disc wear test device was recently introduced. In the present study, the pins were CoCr with a spherical, polished bearing surface of 28 mm radius, whereas the flat discs were conventional UHMWPE. This configuration was intended to simulate the wear mechanisms of total knee prostheses. The number of wear cycles run was as high as 200 million. The mean wear rate was 0.35 mg per one million cycles (0.77 mg/24 h) which corresponded to a mean wear factor of 3.5 × 10⁻⁶ mm³/Nm. The study provided further proof that a wear test for orthopaedic implant materials can be accelerated by substantially increasing the cycle frequency, provided that the sliding velocity remains close to the values obtained from biomechanical studies. Hence, the moderate frictional heating will not lead to unrealistic wear mechanisms.     

Rapid simulation procedure for fretting wear on the basis of the method of dimensionality reduction

We suggest a numerical procedure for rapid simulation of fretting wear in a contact of two bodies subjected to tangential oscillations with a small amplitude. The incremental wear in each point of contact area is calculated using the Reye–Archard–Khrushchov wear criterion. For applying this criterion, the distributions of pressure and relative displacements of bodies are required. These are calculated using the method of dimensionality reduction (MDR).     

Study on properties of flame‐retardant cyanate esters modified with DOPO and triazine compounds

Ternary flame‐retardant modified cyanate ester blends (CEPG and CEPA) are formed by combining triazine compounds (TGIC or TAIC) and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide with cyanate ester resin. The curing behaviors, thermal and mechanical properties, and the flame‐retardant properties are investigated. The results show that the CEPG and CEPA blends result in lower curing temperatures and glass transition temperatures than those of neat CE. Both of CEPG and CEPA blends significantly improve the flame‐retardant properties of CE resins, and UL‐94V‐0 rate is achieved for CEPG‐1.0 and CEPA‐0.5. The dielectric constant and loss of CEPA blends are lower than those of CEPG blend with the same phosphors content, and both of them are lower than those of neat CE. Therefore, the ternary flame‐retardant modified cyanate ester blends provide 2 ways for composites of producing printed circuit board with high flame‐retardant property and low dielectric constant and loss.     

Accelerated wear testing of polyurethane hydraulic seal

The wear characteristics of a polyurethane (PU) hydraulic seal were investigated using a hydraulic seal tester and a pin-on-plate reciprocating tribo-tester, and the results were compared to field data with the aim of developing an accelerated wear test method for hydraulic seals. Tests using a hydraulic seal tester and a pin-on-plate reciprocating tribo-tester were found to reproduce abrasive wear of PU from the field. However, a significant compression set was observed from the test using the hydraulic seal tester. Motivated by the occurrence of abrasive wear from the field, the discolored lubricant and the lubricant with alumina particles were further used for testing using the pin-on-plate reciprocating tribo-tester. The height decrease data of the sealing surface showed that the wear was accelerated by factors of 2.1–3.4 using these degraded lubricants. The outcomes of this work are expected to aid in the design of reliable accelerated life testing for hydraulic seals.     

Medium modified fragmentation function: equivalence of the ACSX and QW formalisms in the high-Q2 region

We study the medium modified fragmentation function in high-energy heavy-ion collisions. We show that the ACSX and QW formalisms are equivalent to each other in the high-Q² limit in both theoretical and numerical aspects.     

Heavy-Ion Collisions: Experimental Highlights

Lattice QCD predicts a phase transition between hadronic matter and a system of deconfined quarks and gluons (the Quark Gluon Plasma) at high energy densities. Our current understanding of this new state of matter will be discussed with two key results from the Relativistic Heavy Ion Collider (RHIC).