Dynamic Optical Vortex Trajectory Guided by the Symmetric Pearcey Gaussian Vortex Beam in the Uniformly Moving Parabolic Potential

This paper analytically and numerically proposes the propagation dynamics of the symmetric Pearcey Gaussian vortex beam (SPGVB) in the uniformly moving parabolic potential. The optical vortex located in the initial plane produces a vortex channel in the presence of the uniformly moving parabolic potential, called the vortex trajectory. The vortex trajectory can be manipulated dynamically by configuring different combinations of the parameters, and the optical intensity and the focal position can also be affected. Moreover, the spatial dynamic vortex trajectory is derived analytically, and the 2D on-axis and off-axis vortex scenarios are also presented. Our work expands the methods of the vortex trajectory manipulation and may broaden more practical potential applications in the particle manipulation.     

超声速大攻角旋成体迎风激波数值模拟

旋成弹体在大攻角超声速流动中其迎风面上有时会出现一种迎风激波．采用非定常雷诺平均的NavierStokes方程以及两方程kω—sst和代数B—L湍流模型成功地模拟了该现象，验证了该迎风激波是由于流场主旋涡导致超声速流动偏移造成的涡诱导激波的一部分的结论．     

SIMULATION OF TYPHOON’S ANOMALOUS TRACK (Ⅰ)──RANKINE VORTEX MODEL

This paper proposes a method for simualting symmetric and simulating symmetric and asymmetric typhoonby using Rankine vortex model. Considering similarity between tropical cyclone andthe Rankine vortex,the paper has qualitatively discussed the feasibility of the methods In order to decide quantitatively Rankine vortex’s parameters to simulate typhoon’s structure, the paper has dealt with TCM data.for Yancy Typhoon (9012) as initial fields.. These results are considered as a foundation for further studying typhoon motion by CD approach.     

应用PIV技术测试涡旋波流场

涡旋波流动作为一种特殊的流动现象,可以使流体在相对较宽的槽道中产生较强的波动和对流混合,从而在小Re数条件下起到强化传质的效果。本文利用PIV流场显示技术,对振荡流在非对称槽道中所形成的涡旋波的产生机理和发展规律进行了实验研究和定量分析,测得了涡旋波流场的速度矢量图,阐明了涡旋波流场周期性变化的特点。分析了Re数和St数对涡旋波流动的影响,并得出了旋涡涡心位置以及涡心处涡量的动态变化规律。     

75°前缘后掠角细长三角翼失速特性实验研究

本文简介了前缘后掠角为７５°的平板三角翼在西北工业大学ＮＦ－３低速风洞中的测力和相关的激光片光流动显示实验，给出了部分实验结果，并与文献［１－３］的结果进行了比较，虽然各种来源的结果存在着明显的差异，但ＮＦ－３风洞两种测试手段的实验结果却具有良好的相关性。     

Effusing core at the center of A potential vortex

Experiments were carried out to measure the base pressure distribution of a flow field induced by a potential vortex with its axis normal to a stationary disk. The center base pressure coefficient of the vortex, C₀(0), was found to be proportional to Reynolds number from Re = 2.0 × 10³ to Re > 2.5 × 10⁴, where Re is based on the disk radius and azimuthal velocity at the disk edge. This behavior of C₀(0) is at variance with the experimental results of Phillips (Phys. Fluids, 27, 2215, 1984) and Khoo (M. Eng. Thesis, Natl. Univ. Singapore, 1984), which showed vastly different trends depending on Re. Plausible reasons are suggested for the apparent discrepancies observed. Finally, the extent of the effusing core at the center, r₁ (taken to be the radial position where departure from the outer potential flow took place), was found to be proportional to Re^−1/2 for all Re values considered.     

湍流边界层中马蹄形涡的形成方式

本文使用一种新的流动显示方法——激光片光运动法和几种实验技巧对湍流边界层中的马蹄形涡进行了观测,发现并描述了其形成的四种方式:二次不稳定式、组合式、变形式和突发式。对这四种马蹄形涡的形成及发展进行了研究和比较。实验结果表明,这些马蹄形涡在尺度、运动速度和变形上是有差别的。     

入射涡与圆柱相互作用的数值模拟

本文用快速涡方法对入射涡与圆柱的相互作用进行了数值模拟,观察到了入射涡在圆柱表面上诱导的二次分离和三次分离现象。二次涡的产生,与入射涡配对,改变了它们的运动轨迹。二次涡是入射涡“回跳”现象的主要原因。本文还对不同入射涡强度及相互位置作了计算,并分析了不同参数对涡运动轨迹的影响。这些现象与涡的无粘圆柱绕流有着本质的差异。