Fatigue Crack Nucleation at Σ3(1 1 2) Boundary in a Ferritic Stainless Steel

The effect of a geometrical relationship between a grain boundary (GB) plane and a tensile axis on intergranular fatigue cracking along 3(1 1 2) twin boundaries has been investigated in Fe-30%Cr alloy crystals. Fatigue experiments were carried out on the three kinds of the specimens containing the 3(1 1 2) twin boundary. It was found that the fatigue cracking behavior was sensitive to the geometry of the GB plane. In a specimen where both the GB plane and a slip vector lying in the GB plane in adjacent grains are inclined to the tensile axis at 45°, the fatigue cracks were nucleated preferentially along the twin boundary at a stress amplitude of 170 MPa. The specimen with the GB plane normal to the tensile axis showed that the fatigue crack was initiated from a slip band formed within a constituent grain at a stress amplitude of 300 MPa. When the GB plane was inclined to the tensile axis but the slip vector lying in the GB plane was normal to the tensile axis, development of additional slips formed perpendicular to the GB plane were observed at a specific site of the GB. Initiation of intergranular fatigue cracks at the site was recognized at a stress amplitude of 250 MPa. It can be suggested that the GB plane normal to the tensile axis provides the highest fatigue performance among them. The difference in the cracking property among these specimens could be understood in terms of the effective Schmid factor derived from elastically incompatible stress.     

About the definition of mass in (Machian) classical mechanics

We want in this note to clarify some aspects of the Machian foundation of the concept of mass in classical mechanics; specifically, we show how the relations of transitivity for the mass-ratios, necessary for a well grounded definition of mass, can be derived from Machian postulates.     

Computation of collective modes and acoustic investigations at different temperatures of vitrous silica

This paper is mainly concerned with elastic and acoustic properties of vitrous silica besides the computation of phonon frequencies. Thus the phonon frequencies of vitrous silica have been calculated assuming the electronic bulk modulus,K _e, as equal to zero. New equations have been derived to relate the pressure derivatives of second order elastic constants to the acoustic Gruneisen’s parameters using both Bhatia-Singh’s parameters and Schofield’s equations. The calculated longitudinal and transverse Gruneisen’s parameters and the predicted absorption band spectra from Nagendranath’s equation and Bhatia Singh’s parameters are in good agreement with experiment. The calculated mean acoustic mode Gruneisen’s parameter evaluated from the pressure derivative of Nagendranath’s equation is also in good agreement with experiment. An erratum to this article is available at .     

A perturbation boundary integral equation method for analysis of interaction between foundation and nonlinear rock and soil medium

A scheme is developed for analysing the interaction between a foundation and a nonlinear rock and soil medium, in which the foundation is considered as a linear elastic body and a typical boundary integral equation method (BIEM) is employed. On the basis of taking the nonlinear properties of the medium into account, a perturbation BIEM is developed. The fundamental equations for the nonlinear coupling analysis are formulated, and typical problems are solved and discussed by the present method.     

A boundary integral formulation for elastically deformable particles in a viscous fluid

This paper reports a formulation and implementation of a mixed (both direct and indirect) boundary element method using the double layer and its adjoint in a form suitable for solving Stokes flow problems involving elastically deformable particles. The formulation is essentially the Completed Double Layer Boundary Element Method for solving an exterior traction problem for the surrounding fluid or solid phase, followed by an interior displacement, and a mobility problem (if required) for the elastic particles. At the heart of the method is a deflation procedure that allows iterative solution strategies to be adopted, effectively opens the way for large-scale simulations of suspensions of deformable particles to be performed. Several problems are considered, to illustrate and benchmark the method. In particular, an analytical solution for an elastic sphere in an elongational flow is derived. The stresslet calculations for an elastic sphere in shear and elongational flows indicate that elasticity of the inclusions can potentially lead to positive second normal stress difference in shear flow, and an increase in the tensile resistance in elongational flow.This work is supported by a grant from the Australian Research Grant Council. X-J F wishes to acknowledge the support of the National Natural Science Foundation of China.     

Limitation of Auger electron spectroscopy in the determination of the metal-on-oxide growth mode: Pd on MgO(100)

A discussion on the use of Auger electron spectroscopy as a quantitative tool to determine the growth mode of metals on single crystal oxide surfaces is presented. In the case of Pd grown epitaxially on MgO(100), the three-dimensional character of the growth is easily seen at coverage above one monolayer. However, in the submonolayer regime, and mainly at low substrate temperatures, the AES results are ambiguous. The combination of AES with the more sensitive helium-atom diffraction method allows us to demonstrate that the growth is three-dimensional from the early stages, the particles becoming flatter when the substrate temperature decreases. We compare our results with other growth studies on different metal/oxide systems. At low temperature, the ideal growth modes are not always observed, the final morphology of the films being determined mainly by kinetic effects. Thus a pseudo-Stranski-Krastanov growth mode is often obtained with formation of 2D islands followed by 3D clustering from a critical submonolayer coverage.     

Isobaric analogue resonances in71As through proton elastic scattering on70Ge

The analogues of the low-lying levels in⁷¹Ge have been observed as resonances in the compound nucleus⁷¹As through proton elastic scattering on⁷⁰Ge in the energy rangeE _p=3.5 to 5.3 MeV. The excitation functions cover the analogue resonances corresponding to states upto 2.3 MeV excitation in⁷¹Ge. The sub-structures in the 5.06 MeV resonance, first observed by Temmer and co-workers have been confirmed in the present experiment. The present investigation reveals similar sub-structures in the 4.13 MeV resonance lending further support to the existence of intermediate structure near an isobaric analogue resonance. The resonance parameters and the spectroscopic factors (for the corresponding parent states) have been extracted. The results are compared with the information available from the⁷⁰Ge(d, p)⁷¹Ge reaction.     

Neutron scattering by anharmonic crystals and the effect of sublattice displacements

A theory has been given for the scattering of neutrons by anharmonic crystals, for which terms of the typeV ⁽³⁾ (k _1j1; —k _1j1;o _j) which contribute to the sublattice displacements are not neglected. Using the standard perturbation theory in the interaction picture or Green’s function method, an expression has been derived for the differential scattering cross-section which brings in the shift and the width of the phonons in one-phonon energy exchange processes. It is shown that the sublattice displacements will modify the phase factor arising from the scattering by any atom in the unit cell, and the Debye-Waller factor also gets altered both by the sublattice displacements as well as by higher order terms arising from anharmonicity. It is shown that the differential scattering cross-section contains a term linearly depending on the third order anharmonicity coefficientV ⁽³⁾ (k _1j1;k _2j2;k _3j3) and neutron scattering by crystals should provide a useful method for evaluating the third order anharmonicity coefficients.     

Stress State of an Elastic Space with a Toroidal‐Shaped Cavity

Solutions are obtained for the stress state problem for an elastic space with an internal toroidalshaped cavity that can be expanded in a trigonometric series in the angle in cylindrical coordinates. Displacements and stresses are specified on the boundary. An analytic solution of the problem is found using generalized analytic functions. Stresses and displacements of points in the elastic space are calculated.