Synthesis and properties of new polyesters having tetrahydrofuran rings in their main chains

New polyesters 6a–6c consisting of 2,4-linked tetrahydrofuran rings were synthesized by bulk polycondensation of methyl trans- and cis-4-hydroxytetrahydrofuran-2-carboxylates ( 5a and 5b ) and a stereoisomeric mixture of methyl 4-hydroxy-5-methyltetrahydrofuran-2-carboxylate ( 5c ) at high temperature. These monomers were prepared from methyl glycolate or methyl lactate and diethyl maleate through a four-step reaction sequence. The polycondensation was carried out without solvent at different temperatures ranging from 150 to 220°C. Titanium isopropoxide was most effective among the catalysts examined, giving polyesters with number-average molecular weights up to 2 × 10⁴. Polyester 6a consisting of trans-2,4-linked tetrahydrofuran rings was soluble in trifluoroacetic acid and a mixed solvent of chloroform and methanol (10/1, v/v). Polyester 6b composed of cis-2,4-linked tetrahydrofuran rings was soluble in dimethyl sulfoxide and dimethylformamide in addition to the two solvents for 6a . Polyester 6c with 5-methyl-substituted tetrahydrofuran rings was composed of a mixture of stereoisomeric units and thus was soluble in a variety of solvents including chloroform, tetrahydrofuran, acetonitrile, dimethyl sulfoxide, and dimethylformamide. The glass transition temperatures of 6a, 6b , and 6c determined by DSC were 109, 88, and 66°C. These polyesters were found to be very slowly hydrolyzed in a neutral phosphate buffer solution at ambient temperature. © 1993 John Wiley & Sons, Inc.     

环戊二烯基二硫代氨基甲酸钛(Ⅳ)、锆(Ⅳ)配合物的合成及结构表征

(RCp)_2MCl_2,(RCp)TiCl_3分别与N-(4-苯基-2-噻唑基)二硫代氨基甲酸钾和3-苯基-5-(2-呋哺基)-吡唑啉-1-二硫代甲酸钠进行反应,合成了三十二个未见报道的(RCp)M(S_2CNHR′)_nCl_(3-n),(RCp)_2M-(S_2CNHR′)_nCl_(2-n),[R=H,Me;M=Ti,Zr;R′=4-苯基噻唑基(PTDTC),n=1,2,3]以及(RCp)M(S_2CR~2)_nCl_(3-n),(RCp)_2M(S_2CR~2)_nCl_(2-n)[R=H,Me;M=Ti,Zr,R~2=3-苯基-15-(呋喃-2)吡唑啉基(PFPDTC),n=1,2,3]型配合物。所有配合物经元素分析、UV、IR和'H NMR谱证实,二硫代氨基甲酸是以双齿配体键合的。     

Preparation of enol ethers by carbonyl olefination utilizing an alkoxymethyl chloride-titanocene(II) system

Aldehydes, ketones, esters and lactones are transformed into enol ethers or 1,2-dialkoxy-1-alkenes by treatment with organotitanium species prepared from alkoxymethyl chlorides and a titanocene(II) complex.     

V2O5/TiO2 Catalytic Xerogels Raman and EPR Studies

Raman spectroscopy and Electron Paramagnetic Resonance (EPR) studies were performed on a series of V₂O₅/TiO₂ catalysts prepared by a modified sol-gel method in order to identify the vanadium species. Two species of surface vanadium were identified by Raman measurements, monomeric vanadyls and polymeric vanadates. Monomeric vanadyls are characterized by a narrow Raman band at 1030 cm^–1 and polymeric vanadates by two broad bands in the region from 900 to 960 cm^–1 and 770 to 850 cm^–1. The Raman spectra do not exhibit characteristic peaks of crystalline V₂O₅. These results are in agreement with those of X-ray Diffractometry (XRD) and Fourier Transform Infrared (FT-IR) previously reported (C.B. Rodella et al., J. Sol-Gel Sci. Techn., submitted). At least three families of V⁴⁺ ions were identified by EPR investigations. The analysis of the EPR spectra suggests that isolated V⁴⁺ ions are located in sites with octahedral symmetry substituting for Ti⁴⁺ ions in the rutile structure. Magnetically interacting V⁴⁺ ions are also present as pairs or clusters giving rise to a broad and structureless EPR line. At higher concentration of V₂O₅, a partial oxidation of V⁴⁺ to V⁵⁺ is apparent from the EPR results.     

用分子轨道理论研究NO气体在TiO2表面吸附

根据一氧化氮(NO)气体在二氧化钛(TiO₂)表面吸附和脱附的实验结果, 揭示了气体脱附量的变化规律. 利用MOPAC 和GAUSSIAN分子轨道理论计算了在TiO₂(110)表面上吸附NO分子的原子簇模型, 电荷分布以及原子簇的能级, 推断了NO在TiO₂(110)表面吸附的稳定性.     

Preparation of Titania from Tetrakis(diethylamino)titanium via Hydrolysis

The conversion of tetrakis(diethylamino)titanium (Ti(NEt₂)₄) into titania via either a combination of hydrolysis (Ti(NEt₂)₄ : THF : H₂O = 1 : 10 : x, x = 2, 4, 10) at ambient conditions and calcination (method A) or hydrolysis in a water-tetrahydrofuran (THF) mixture (Ti(NEt₂)₄ : THF : H₂O = 1 : 10 : 100) at reflux (method B) was investigated. Titanium tertiary butoxide (Ti(O ^t Bu)₄) was also used as a substitute for Ti(NEt₂)₄. The hydrolysis via method A resulted in the formation of amorphous solids containing organics. Thermal analyses showed that the hydrolysis products showed mass losses up to 500°C probably due to the presence of diethylamine (Et₂NH) formed via the hydrolysis of Ti(NEt₂)₄ in the hydrolysis products, while a mass loss of the hydrolysis product from Ti(O ^t Bu)₄ was completed up to about 200°C. After calcination at 600°C, anatase or a mixture of anatase and rutile was obtained. The crystallization behavior of the hydrolysis products from Ti(NEt₂)₄ was different from that of the hydrolysis product from Ti(O ^t Bu)₄. The hydrolysis via method B gave only an amorphous material from Ti(NEt₂)₄, while a crystalline titania (anatase and brookite) formed from Ti(O ^t Bu)₄.     

后处理法合成高热稳定性的中孔Ti-P-Al材料

 以阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)为模板剂,采用水热合成法制备了中孔氧化钛原粉,再采用磷酸和氯化铝溶液依次对中孔氧化钛原粉进行后处理,得到了具有高热稳定性的中孔Ti-P-Al材料. 通过粉末X射线衍射、透射电子显微镜和氮物理吸附等方法对样品进行了表征. 结果表明,反应凝胶组成对样品的中孔结构有较大的影响,当反应凝胶配比为Ti(SO4)2∶CTAB∶H2O=1∶0.54∶430, 温度为363 K, 处理时间为10～20 min时,所得的TiO2原粉具有较规整的中孔结构. 此样品经过0.25 mol/L的磷酸处理后有序性有较大程度的提高. 将磷酸处理过的样品进一步用氯化铝溶液处理,得到了中孔结构的Ti-P-Al材料,此材料经过873 K焙烧后仍具有典型的中孔特征,其比表面积为 382 m2/g, 孔径为3.13 nm.     

手性钛锆化合物在不对称合成中的应用

本文综述了近年来手性钛锆化合物在不对称合成中的应用, 特别是手性柄型金属钛和锆化合物在不对称合成中的应用。对这类催化剂的特点和前景作了简要介绍。     

La2O3对钛合金表面镍基喷焊涂层组织和性能的影响

采用火焰喷焊技术在钛合金基体上制备了不加La2O3和加4％(质量分数)La2O3两种镍基涂层，分析了它们的显微组织、合金元素的扩散、显微硬度以及耐磨性能。结果表明：La2O3的加人，改善了涂层合金的流动性和显微组织的均匀性，并使涂层与基体的熔合更加明显，结合性能得到进一步提高；虽然一定程度上减弱了基体Ti元素对喷焊层的强化作用，使表层显微硬度略有下降，但磨损失重却较未加La2O3的喷焊涂层下降了20％。     

单分散二氧化钛超微粒子的制备

以四丁氧基钛为原料，采用溶胶－凝胶法制备了超微二氧化钛粉末．改变热处理气氛、升温速率、水与四丁氧基钛的摩尔比以及溶剂，分别得到７ｎｍ球形单相锐钛矿以及四方形（４０ｎｍ×１０ｎｍ）、球形（４４ｎｍ）的主相金红石超微粒子．