Synthesis and structure of 6-chloro-2,3-trimethylene-4-phenylquinoline

An X-ray structural investigation of 6-chloro- 2,3-trimethylene-4- phe nylquinoli ne obtained by the reaction of 2-amino-5-chlorobenzophenone with cyclopentanone was carried out. At 20 °C, a = 23.750,b = 9,242, c = 14.018 A, = 112,68° space group (21c,Z = 8, 2647 reflections,R = 0.047 He five-membered ring has an envelope conformation Conjugation between the quinohne fragment and the phenyl substituent is significantly distorted dm to the rotation of the latter by -62.9°Translated fromIzvestiya Akademii Nauk. Seriva Khimicheskaya, No. 7, pp. 1800–1802, July, 1996.     

Prepared Low Stress Cubic Boron Nitride Film by Physical Vapor Deposition

We present low stress cubic boron nitride (cBN) films with a transition layer deposited on the metal alloy substrates by tuned substrate radio-frequency magnetron sputtering. The films were characterized by Fourier transform infrared spectroscopy and transmission electron microscopy (TEM). The IR peak position of cubic boron nitride at 1006.3 cm⁻¹, which is close to the stressless state, indicates that the film has very low internal stress. The TEM image shows that pure CBN phase exists on the surface of the film. Several phases of boron nitride were found at the medium implantation dose. It is believed that the transition from the low ordered phases to cBN phase occurred during implantation.     

高分辨等离子体质谱法直接测定高纯镓中的痕量元素

建立高分辨电感耦合等离子体质谱法(HR-ICP-MS)测定高纯镓样品中Be、Mg、A l、S i、Ti、V、Cr、Mn、Fe、Co、N i、Cu、Zn、Ge、As、Mo、Ag、Cd、In、Sb、Ba、Pb、B i等痕量元素的方法。样品用HNO3 HC l经微波消解后,试液直接进样用HR-ICP-MS法同时测定上述元素,在高分辨质谱测量模式下避免了大量的质谱干扰,详细地研究了HC l和高纯镓所产生的基体效应,以Sc、Rh、Tl作为内标元素校正了基体效应,讨论和确定了实验的最佳测定条件。结果表明,23种痕量元素的检出限在0.001~0.21μg/L之间;回收率在89.8%~111.6%之间,相对标准偏差(RSD)小于3.3%。     

Crystal Structures and Magnetic Studies of Naphthalene Derivatives Containing Nitronly Nitroxides

Crystal structures of new nitronyl nitroxide derivatives 1, 2 and 3 were determined with X‐ray diffraction analysis: 1, monoclinic, C₂/c, a = 1.2404(5) nm, b = 0.9730(5) um, c = 2.7049(10) ran, β = 98.189(15)°, V = 3.2315(24) nm³, Z = 8; 2, or‐thorhombic, Pbca, a = 0.61262(2) nm, b = 1.11426(6) nm, c = 2.30543(13) nm, V = 1.57373(13) nm³, Z = 4; 3, monoclinic, P2(1)/n, a=0.64253(4) nm, b=2.55003(17) nm, c = 1.15497(6) nm, β = 95.000(3)°, V = 1.8852(2) nm³, Z = 4. Their magnetic properties were measured with SQUID and analyzed based on their crystal structures with simple singlet‐triplet, modified one dimensional antiferromagnetic chain and modified singlet‐triplet models respectively: 1, J/k_b= ?2.5 K; 2, J/k_b = 7.8 K, θ = 2.8 K; 3, J/k_b = ?0.96 K, θ = 0.21 K.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

ICP-AES内标法测定分子筛的组成

首次通过ICP-AES仪研究了分子筛化学组成全分析的方法，采用HNO3-HF混合酸密闭溶样，用H3BO3配合F^-，分别采用内标法和基体消除法消除基体效应．将研究结果与经典方法比较表明：采用本文研究的分析方法，结果准确可靠，符合分析要求，尤其对杂原子分子筛以及金属氧化物修饰的分子筛的组成分析具有应用价值．     

Estimation of the absolute internal-rotation entropy of molecules with two torsional degrees of freedom from stochastic simulations

A method of statistical estimation is applied to the problem of evaluating the absolute entropy of internal rotation in a molecule with two torsional degrees of freedom. The configurational part of the entropy is obtained as that of the joint probability density of an arbitrary form represented by a two-dimensional Fourier series, the coefficients of which are statistically estimated using a sample of the torsional angles of the molecule obtained by a stochastic simulation. The internal rotors in the molecule are assumed to be attached to a common frame, and their reduced moments of inertia are initially calculated as functions of the two torsional angles, but averaged over all the remaining internal degrees of freedom using the stochastic-simulation sample of the atomic configurations of the molecule. The torsional-angle dependence of the reduced moments of inertia can be also averaged out, and the absolute internal-rotation entropy of the molecule is obtained in a good approximation as the sum of the configurational entropy and a kinetic contribution fully determined by the averaged reduced moments of inertia. The method is illustrated using Monte Carlo simulations of isomers of stilbene and halogenated derivatives of propane. The two torsional angles in cis-stilbene are found to be much more strongly correlated than those in trans-stilbene, while the degree of the angular correlation in propane increases strongly on substitution of hydrogen atoms with chlorine.     

Modification of Surface and Structural Properties of Ordered Mesoporous Silicates

Two simple modification methods for ordered mesoporous silicas were examined and compared. MCM-41 molecular sieve was physically coated with 4-cyano-4-biphenyl [4(4-pentenyloxy)]benzoate (CBPB) and chemically modified using trimethylethoxysilane. The structural and surface properties of the obtained materials were characterized using elemental analysis, thermogravimetry and nitrogen adsorption over a wide pressure range.It was shown that the pore size of the MCM-41 material was not decreased significantly after the coating procedure, even for high loadings of CBPB. Moreover, low pressure adsorption measurements indicated that significant fractions of the MCM-41 surface were not covered by CBPB, even for high CBPB loadings, which suggests that the attained coverage may be very nonuniform. The chemical bonding procedure led to a marked decrease in the pore size and change of surface properties.It was demonstrated that nitrogen adsorption measurements provide a means of a thorough characterization of modified MCM-41 materials, allowing to estimate the surface area, pore volume and pore size distribution. Moreover, low pressure adsorption data can be used to qualitatively or semiquantitatively assess the surface coverage of the coated/bonded organic groups, which may be used to estimate the uniformity of the coverage and therefore, the usefulness of the modification procedure.     

Pattern of separatrices and intrinsic reaction coordinates for degenerate thermal rearrangements

A structurally stable model of the standard adiabatic gradient field of the potential energy surface for certain pericyclic reactions is derived.These reactions are not subjected to the principles of orbital isomerism or to the Woodward-Hoffmann rules.Use is made of a principle established by Ariel Fernández and Oktay Sinanolu which precludes direct meta-IRC connections between transition states.It is shown that Jahn-Teller isomers of the singlet biradicals involved in the process are not interconvertible since the biradical configuration is not a transition state but a critical point with Hessian matrix with two negative eigenvalues.The topological features of the PES obtained by combinatorial methods are in full agreement with earlier results obtained from MINDO calculations.     

A free energy calculation study of the effect of H-->F substitution on binding affinity in ligand-antibody interactions

Changes in binding affinity to catalytic antibody 6D9 of chloramphenicol phosphonate derivatives (CPDs) containing H or F were investigated by performing free energy calculations based on molecular dynamics simulations. We calculated the binding free energy, enthalpy, and entropy changes (DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS) attributable to H-->F substitution by comparing results for CPDs containing a trifluoroacetylamino group (CPD-F) or an acetylamino group (CPD-H). The calculated DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS values were -2.9, -6.3, and 3.5 kcal mol(-1) and close to experimental values observed for a series of similar ligands, chloramphenicol phosphonates with F and H (-1.4, -3.5, and 2.1 kcal mol(-1)). Therefore, CPD-F binds more strongly to 6D9 than does CPD-H. To clarify the origin of the large difference in DeltaDeltaG, we apportioned the calculated values of DeltaDeltaG and DeltaG for the associated and dissociated states into contributions from various atomic interactions. We found that the H-->F substitution increased the binding affinity mainly by decreasing the hydration free energy and not by increasing favorable interactions with the antibody. The decreased hydration free energy of the ligand was mainly due to unfavorable coulombic interactions between the trifluoroacetylamino group and solvent waters, which increased the free energy of the dissociated state (by about 3.7 kcal mol(-1)). Also, the trifluoroacetylamino group slightly increased the free energy level of the associated state (about 0.8 kcal mol(-1)) because favorable van der Waals interactions compensated for unfavorable coulombic interactions with antibody atoms. In addition, the enthalpy and entropy changes, DeltaDeltaH and -TDeltaDeltaS (computationally -6.3 and 3.5 kcal mol(-1)), originated mainly from a decrease in hydration free energy in the dissociated state. The CPD-F and CPD-H ligands had substantially different structures in the dissociated and complexed states.