Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

Influence of the Interaction between Two Neighboring Periodically Curved Fibers on the Stress Distribution in a Composite Material

A method is developed for a stress analysis in an infinite elastic body containing two neighboring periodically cophasaly curved fibers located along two parallel lines. The stress distribution is studied when the body is loaded at infinity by uniformly distributed normal forces in the fiber direction. The investigation is carried out within the framework of a piecewise homogeneous body model with the use of exact three-dimensional equations of elasticity theory. Numerical results related to the stress distribution considered and the influence of interaction between the fibers on this distribution are given.     

稀薄气体二维外部柱体绕流特性研究

本文采用直接模拟蒙特卡罗方法对稀薄气体二维外部柱体绕流问题进行了数值模拟。结果表明:外部绕流问题,在特定情况下会产生激波,激波的产生,不仅与气体的稀薄程度有关,还与来流马赫数有关。而气流与壁面之间的换热,随来流马赫数增加而增加,随气体稀薄程度增加而减小。     

Finite-Dimensional Approximations for Scattering Theory Operators in the Wave-Packet Representation

We consider some types of packet discretization for continuous spectra in quantum scattering problems. As we previously showed, this discretization leads to a convenient finite-dimensional (i.e., matrix) approximation for integral operators in the scattering theory and allows reducing the solution of singular integral equations connected with the scattering theory to some suitable purely algebraic equations on an analytic basis. All singularities are explicitly singled out. Our primary emphasis is on realizing the method practically.     

Laser spectroscopic investigation of a new precursor-type polyparaphenylenevinylene

Optical, structural and morphological properties of thin films of polyparaphenylenevinylene (PPV) formed by an alkyl sulfinyl precursor route have been studied. Thin films were fabricated on an optical glass and on quartz glass either by spin-coating of the precursor solution or by layer-by-layer deposition using Langmuir–Blodgett technique. PPV precursor films were also spin-coated on gold-coated glass in order to study thin-film optical parameters by surface plasmon spectroscopy. We have been successful in forming about 40 precursor mono layers on quartz glass by Langmuir–Blodgett technique using optimized surface pressure and dipping conditions. After thermal conversion of the precursor layers good quality fluorescent PPV films of yellow colour have been obtained. Optical characterization of the films was carried out by linear absorption and emission spectroscopy, ellipsometry, and surface plasmon spectroscopy. Structural and morphological studies on the thin films were carried out by using X-ray scattering and atomic force microscopy. Wave-guided travelling-wave laser action has been achieved in a PPV film on quartz glass. The sample was transversally pumped with picosecond laser pulses (wavelength 347.15 nm, duration 35 ps). Laser emission occurred at 550 nm for pump pulse energy densities above .     

An optical fibre pH sensor based on dye doped mesostructured silica

This paper describes the synthesis and optical pH sensing properties of a pH indicator dye activated mesostructured silica coated optical fibre. The pH-sensitive dye bromothymol blue was incorporated into the mesostructure sol precursor and thin films/coatings were used for pH-sensing applications without prior removal of the surfactant. The pH sensitivity range and operating wavelength were analysed by absorption measurements on layer dip-coated on glass slides. The pH sensing properties of coated optical fibre were tested by evanescent wave method. Experiments were carried out by using a series of solutions of known pH. No leaching was observed (except at very high pH) and an excellent reversibility was obtained between pH=2 and 5.     

A boundary element method for the calculation of noise barrier insertion loss in the presence of atmospheric turbulence

Atmospheric turbulence is an important factor that limits the amount of attenuation a barrier can provide in the outdoor environment. It is therefore important to develop a reliable method to predict its effect on barrier performance. The boundary element method (BEM) has been shown to be a very effective technique for predicting barrier insertion loss in the absence of turbulence. This paper develops a simple and efficient modification of the BEM formulation to predict the insertion loss of a barrier in the presence of atmospheric turbulence. The modification is based on two alternative methods: (1) random realisations of log-amplitude and phase fluctuations of boundary sources and (2) de-correlation of source coherence using the mutual coherence function (MCF). An investigation into the behaviours of these two methods is carried out and simplified forms of the methods developed. Some systematic differences between the predictions from the methods are found. When incorporated into the BEM formulation, the method of random realisations and the method of MCF de-correlation provide predictions that agree well with predictions by the parabolic equation method and by the scattering cross-section method on a variety of thin barrier configurations.     

双光束相干控制产生多次谐波的实验验证

利用两束相干度可改变的飞秒脉冲光对产生的五次谐波的强度特性进行了研究，发现谐波信号的强度随相干程度的增大而增加，谐波信号的最大值相对于相干零点(双光束相干度最大处)是非对称的，从而证明了合成的激光脉冲波形变化对谐波信号的影响.同时对谐波的受激放大理论进行了初步的实验探索和展望. 关键词： 五次谐波 波形变化 相干 受激放大     

Three methods for analyzing forced vibration of a fluid-filled cylindrical shell

The forced vibration of an infinite elastic circular cylindrical shell filled with fluid is studied. Three methods are employed to analyze the forced vibration problem of this shell-fluid coupled system, that is, wave propagation approach (wave mode superposition), theorem of residues and a numerical integral method. In order to explain these methods more explicitly, before being used to investigate the vibration of an infinite fluid-filled elastic circular cylindrical shell, all these three methods are employed firstly to analyze the forced vibration problem of an infinite beam and an infinite elastic circular cylindrical shell in vacuo. Advantage and disadvantage of these three methods are discussed and their interesting relationship is revealed. That is, to any circumferential wavenumber and frequency of the external force, there is an unchangeable relationship between the general coordinates of various waves in the wave propagation approach and the residuals in the theorem of residues.