Characteristics and design procedure of hyperbolic dies

Nozzle profiles capable of generating constant extensional strain rates are termed hyperbolic dies. When used in polymer extrusion, they exhibit greater potential in inducing and retaining polymer molecular orientation than conventional capillary dies. Most mathematical expressions found in the literature involve several processing variables in describing and designing such nozzle profiles. This report reveals that a hyperbolic die profile, although rather complicated, can be expressed with equations in terms of two ordinary geometrical parameters—the exit diameter and the hyperbolic length. This finding greatly simplifies the design procedure of hyperbolic dies. The extensional strain rate of a hyperbolic die can be related to the length-to-diameter ratio for any given exit diameter. Examples of various types of die profiles are presented and their constant extensional strain-rate characteristics are discussed.     

The coordination of the catalytic zinc ion in alcohol dehydrogenase studied by combined quantum-chemical and molecular mechanics calculations

Summary The coordination number of the catalytic zinc ion in alcohol dehydrogenase has been studied by integrated ab initio quantum-chemical and molecular mechanics geometry optimisations involving the whole enzyme. A four-coordinate active-site zinc ion is 100–200 kJ/mol more stable than a five-coordinate one, depending on the ligands. The only stable binding site for a fifth ligand at the zinc ion is opposite to the normal substrate site, in a small cavity buried behind the zinc ion. The zinc coordination sphere has to be strongly distorted to accommodate a ligand in this site, and the ligand makes awkward contacts with surrounding atoms. Thus, the results do not support proposals attributing an important role to five-coordinate zinc complexes in the catalytic mechanism of alcohol dehydrogenase. The present approach makes it possible also to quantify the strain induced by the enzyme onto the zinc ion and its ligands; it amounts to 42–87 kJ/mol for four-coordinate active-site zinc ion complexes and 131–172 kJ/mol for five-coordinate ones. The four-coordinate structure with a water molecule bound to the zinc ion is about 20 kJ/mol less strained than the corresponding structure with a hydroxide ion, indicating that the enzyme does not speed up the reaction by forcing the zinc coordination sphere into a structure similar to the reaction intermediates.     

Walker Bleakney and the development of the shock tube at Princeton

Recollections of activities in the Physics Department of Princeton University leading to the construction and use of the SHOCK TUBE are recorded. Walker Bleakney was the leader of these activities from 1940 to 1979, and his methods and attitude are described. Original interferograms made at Princeton show some results obtained.     

Nonaxisymmetric thermal stress state of laminated rotational bodies of orthotropic materials under nonisothermic loading

A procedure for numerical investigation of nonaxisymmetric temperature fields and the elastic stress-strain state of laminated rotational bodies of cylindrically and rectilinearly orthotropic materials under nonisothermal loading is proposed. The deformation of orthotropic materials is described by the equations of anisotropic elasticity theory. The equations of state are written in the form of Hookes law for homogeneous materials, with additional terms which take into account the thermal deformation, changes in the mechanical properties of materials in the circumferential direction, and their dependence on temperature. A semianalytic finite-element method in combination with the method of successive approximations is used. An algorithm for numerical solution of the corresponding nonlinear boundary problem is elaborated, which is realized as a package of applied FORTRAN programs. Some numerical results are presented.Translated from Mekhanika Kompozitnykh Materialov, Vol. 40, No. 6, pp. 731–752, November–December, 2004.     

埋入式光纤光栅应变测量系统的设计

埋入式光纤光栅应变传感器作为大型土木结构健康监测的智能元件具有很好的发展前景。讨论了埋入式光纤光栅应变传感器的传感机理，设计了埋入式光纤光栅应变测量系统。从力学角度阐述了光栅传感探头的结构和制作工艺。采用可调谐F-P滤波器对光栅信号进行解调，解决了应变与温度交叉敏感问题。系统对应变的测量范围为0～1500με。通过理论分析证实了系统方案的可行性。     

形变多晶氧化铝纤维的荧光R谱线

使用自制拉伸装置和显微拉曼系统测定了形变下多晶氧化铝纤维的荧光R1和R2谱线,发现两条谱线均随纤维拉伸应变的增大而变宽,并获得了纤维应变与谱线宽化值之间的定量关系。从纤维的结晶晶格结构和形态学微结构定性地解释了谱线的宽化行为。也测定了谱线频率与多晶氧化铝纤维温度间的定量关系,频率温度系数值近似等同于单晶氧化铝的值。最后,研究了激发光偏振方向相对于纤维轴向的不同夹角对谱线频率的影响,并由此得出,氧化铝晶粒有相对纤维轴向取向的倾向。     

基于DSP的光纤光栅应变传感器信号检测实验研究

针对光纤光栅应变传感器接收信号弱且信噪比低这一问题,提出了应用DSP技术来抑制噪声,提高Bragg峰值波长检测精度的方法.实验结果表明所设计的498阶Kaiser窗低通FIR数字滤波器能够显著提高光纤光栅应变传感器的信号检测精度.采用DSP技术可以较好地解决光纤光栅传感器的波长解调这一技术难题.     

Creep strain recovery of Fe-Ni-B amorphous metallic ribbon

Creep strain recovery and structural relaxation of the amorphous metallic glass Fe₄₀Ni₄₁B₁₉ after longtime loading at different annealing temperatures below the glass transition temperature have been studied using anisothermal differential scanning calorimetry (DSC) and dilatometry (TMA). It has been demonstrated that structural relaxation effects depend on the stress-annealing temperature of the amorphous ribbon. The structural relaxation states of the amorphous ribbon annealed at different temperatures under and without applied stress have been compared. The activation energy spectra were calculated from the anisothermal dilatometric measurements using the modern method based on the Fourier transformation technique. The influence of the annealing temperature on the shape of creep strain recovery spectra has been analyzed.      

大范围光纤Bragg光栅压力传感器增敏实验研究

鉴于钛合金材料具有低弹性模量、受温度影响小等特性,设计制作了一种以钛合金管作为光纤Bragg光栅应变增敏衬底元件的高压压力传感器件.通过与电阻应变计实时监控的对比,从实验上研究了光纤Bragg光栅的中心波长偏移对调谐压强的响应.结果表明:这种增敏设计,具有良好的线性响应和可重复性,且与理论推导结果吻合较好.增敏后对压力的响应灵敏度可达0.034 nm/MPa,测压量程可达0~40 MPa,甚至更宽.     

The internal strain of three-dimensional braided composites with co-braided FBG sensors

The performance analysis of three-dimensional (3-D) braided composites is made difficult by their complex and interlacing structure, and is still under development. To get complete first-hand data on the material parameters of these composites, co-braided optical fiber sensors (OFS) can be used to measure the internal strain. This information is helpful for subsequent stiffness predictions and failure analysis. This paper introduces a method of incorporating OFS into braided composites, and establishes a constitutive theoretical model for the hybrid material. Experiments are conducted to measure the internal strain of specimens under tension, and the results are compared to theoretical predictions.