Design of Topas microstructured fiber with ultra-flattened chromatic dispersion and high birefringence

A microstructured polymer optical fiber (mPOF) with both ultra-flattened near-zero chromatic dispersion and high birefringence based on Topas cyclic olefin copolymer is designed. Three rings of uniform elliptical air holes are arranged in triangular lattice in the cladding and an extra small defected hole is introduced in the fiber core. Guided modes, dispersion, birefringence and mode confinement properties of the designed mPOF are investigated by using the full-vector finite element method. Dispersion values between ± 0.5 ps/km/nm over the wavelength 1.1-1.7 μm and high birefringence of the order of 10⁻³ are obtained for the optimized fiber structure. Low confinement losses and small effective mode area are obtained at the same time. The relatively simple architecture of the proposed Topas mPOF can be fabricated by our extrusion-stretching techniques.     

Simultaneous measurement of curvature and temperature based on PCF-based interferometer and fiber Bragg grating

A sensor head consisting of a photonic crystal fiber (PCF)-based Mach-Zehnder interferometer (MZI) and a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of curvature and temperature. The MZI fabricated by splicing a short length of PCF between two single-mode fibers with the air-hole structure that completely collapsed near the splicing points, is sensitive to fiber bending and surrounding temperature, while the FBG is only sensitive to the later. Simultaneous measurement of curvature and temperature is therefore obtained. Sensitivities of 4.06 nm/m^− 1 and 6.30 pm/°C are achieved experimentally for curvature and temperature, respectively. And the corresponding resolutions are 5.2 × 10^− 4 m^− 1 and 1.25 °C for curvature and temperature, respectively, based on the wavelength measurement resolution of 10 pm.     

Impact of channel baud-rate on logarithmic digital backward propagation in DP-QPSK system with uncompensated transmission links

We numerically investigate the impact of channel baud-rate on the performance of logarithmic step-size based spilt-step Fourier method (SSFM). This algorithm is used to implement digital backward propagation (DBP) to efficiently compensate fiber chromatic dispersion (CD) and non-linearities (NL). The DBP method is implemented in N-channel dual-polarization quadrature phase shift keying (DP-QPSK) transmission over 2000 km standard single mode fiber (SMF) with no in-line optical dispersion compensation. We investigate the same-capacity and same-bandwidth transmission systems with 56 Gbit/s/ch (14 GBaud), 112 Gbit/s/ch (28 GBaud) and 224 Gbit/s/ch (56 GBaud). Each system has the bandwidth occupancy of 500 GHz with a total transmission capacity of 1.12 Tbit/s. Moreover, we have also compared the multiple channel transmission performance with single channel transmission to quantify the impact of inter-channel (cross-phase modulation ‘XPM’ and four-wave mixing ‘FWM’) and intra-channel (self-phase modulation ‘SPM’) non-linearities. The logarithmic step-size based DBP algorithm (L-DBP) depicts efficient mitigation of CD and NL impairments. The benefit of the logarithmic step-size is the reduced complexity and computational time for higher baud-rate transmission systems.     

A simple technique for evaluation of transmission coefficient at the splice with angular offset and transverse offset for first higher mode propagation in graded index fibers

We present simple and accurate analytical expressions for transmission coefficient at the splice with angular offset and transverse offset in case of first higher mode propagation in graded index fibers. We employ the simple series expression for first higher order modal field for graded index fiber. The evaluation of the concerned parameters based on our formalism requires very little computations. Here, we show that our estimations match excellently well with the exact results in case of step and parabolic index fibers. Further, splice being highly tolerant for longitudinal separation, our analysis is judiciously restricted to the case of transverse and angular mismatches only. The analysis should find application in dual mode graded index fiber in all optical technology.     

Concentration and refractive index sensor for methanol using short period grating fiber

This paper reports on the spectral (response) characteristics of fiber Bragg grating sensor to various methanol concentrations. A complete experimental analysis on the use of Ge-B co-doped fiber Bragg grating sensor for a concentration and refractive index measurement is presented. The spectral changes in the grating response due to variation of concentration have been investigated in relation to new sensing configurations. The results also highlight the possibilities of using the sensor for medical and biological applications.     

Erbium doped fiber ring laser for optical wavelength conversion

We experimentally investigate the gain saturation effect of a piece of 8 m long Erbium doped fiber (EDF), we introduce a theoretical model for the EDF ring loop, and our simulation results show very good cross-gain modulation (XGM) and wavelength conversion. We also experimentally investigate the XGM in an EDF ring loop system. Based on the study of the XGM in the EDF ring loop system, a wavelength conversion is designed with the EDF ring loop system. The EDF ring loop systems as a wavelength conversion is experimentally demonstrated by converting a sinusoidal modulated optical signal at wavelength of 1551 nm to an optical signal at wavelength of 1553.3 nm.     

Simulative investigation the impact of optical amplification techniques on single- and dual-electrode MZM and direct modulator's in single-tone RoF system

Since the introduction of erbium-doped fiber amplifier (EDFA) in optical fiber communication systems at 1550 nm, the fiber loss is no longer considered as the limiting factor but the fiber dispersion and chirp parameters play an important role in degrading the performance of optical communication systems. Further, the invention of external modulators of Mach-Zehnder (MS) type minimizes the transmission power penalty due to fiber chromatic dispersion as these modulators are consider almost chirp-free modulators. Also, better suppression of nonlinear distortions consists of harmonic distortions (HDs) and intermodulation distortions (IMDs) were achieved by using Mach-Zehnder external modulator [8]. In this work, a simulation comparison of external- and direct-modulation schemes using different optical amplifiers; SOA and EDFA in single-tone RoF system is reported. A single-tone channel of 20 GHz is transmitted over single-mode fiber (SMF) either externally modulated by using single-electrode (SEMZM) - and dual-electrode (DEMZM) - Mach-Zehnder modulator or by direct-modulation scheme. Better improvements in the measurement of received RF power of a 20 km linked single-tone RoF system are achieved by using SEMZM with EDFA, which means maximum optical link is achieved between Central Office (CO) and Base Station (BS). Further, this scheme provides better BER as compare to other schemes discussed in this paper.     

A novel method for measuring optical fiber delay lines based on the optical fiber low-coherence Young's interferometer

According to the principle of double-beam interference imaging using an infrared broadband light source, a novel method based on the optical fiber low-coherence Young's interferometer for the measurement of programmable optical fiber delay line is proposed. By measuring the small length increments of delay fiber through the evaluation of the central positions of zero-order interference fringes, we successfully construct a system with a variety of important functions, such as real-time controlling, measurement and displaying. This system offers the benefit that it can be regulated precisely to generate interference stripes once again after the length of fiber segment changes. When the locations of central stripes are moved to coincide with the original markers, the determination of the corresponding fiber optical delay time becomes really simplified, as just by reading out the tinny displacement of the reference arm. Multiple groups of experimental results demonstrate the outstanding performance of the proposed system since it bears a measuring accuracy of μm and a measuring range from 1 mm to 20 cm.     

强流脉冲电子束作用下20钢的微观结构状态

 为了研究金属材料的超快变形行为,利用强流脉冲电子束（HCPEB）装置对20钢进行轰击,采用X射线衍射、光学显微镜及透射电镜等技术分析了受轰击样品的变形组织与结构。实验结果表明,强流脉冲电子束能够在材料表层诱发幅值为1 GPa量级的应力,快速的加热和冷却过程在近表层诱发了强烈的塑性变形,并在材料表层内形成了复杂的位错缠结结构和位错胞结构,同时还伴随位错圈等空位簇缺陷的形成,多次轰击导致局部区域形成纳米和非晶结构。HCPBE轰击诱发的幅值极大的应力和极高的应变速率而导致的整个原子平面的位移可能是非晶结构形成的关键原因。     

二波混频高功率单频窄线宽光纤激光器

设计并制造了一种基于二波混频的高功率单频窄线宽光纤激光器.激光器采用长线形腔结构,以Er3+/Yb3+双包层光纤作为增益介质,利用输出信号光分束反馈注入,与腔内振荡激光混频干涉,形成分布的增益光栅与折射率光栅共同作用选模,获得稳定的1550.63 nm单频高功率激光输出.在975 nm多模激光二极管(LD)抽运下,激光...