Alternating-current losses in two-layer superconducting cables consisting of second-generation superconductors coated by U-shaped ferromagnetic materials

Alternating-current losses in a two-layer superconducting cable, each layer being composed of 15 closely-spaced rectangular wires made up of second-generation superconductors when the ends of wires are coated by either a non-magnetic or strong ferromagnetic material having a U profile is numerically investigated. Computations are carried out through the finite-element method. The alternating-current losses do not increase significantly if the relative permeability of the coating is increased three orders of magnitude, provided that the current amplitude is less than half of the critical current in a superconducting wire. However, the losses are much higher for ferromagnetic coating if the amplitude of the applied current oscillating at 50 Hz is close to the critical current. The ferromagnetic coating is seen to accumulate the magnetic field lines normally on its surfaces, while the field lines are parallel to the long axes of the wires, leading to more significant flux penetration in the coated regions. This facilitates a uniform low-loss current flow in the uncoated regions of the wires. In contrast, coating with a non-magnetic material gives rise to a considerably smaller current flow in the uncoated regions, whereas the low-loss flow is maintained in the coated regions. Moreover, the current flows in opposite directions in the coated and uncoated regions, where the direction in each region is converse for the two materials.     

Poisson–Boltzmann for oppositely charged bodies: an explicit derivation

The interaction between two parallel charged plates in ionic solution is a general starting point for studying colloidal complexes. An intuitive expression of the pressure exerted on the plates is usually proposed, which includes an electrostatic plus an osmotic contribution. We present here an explicit and self-consistent derivation of this formula in the only framework of the Poisson–Boltzmann (PB) theory. We also show that, depending on external constraints, the correct thermodynamic potential can differ from the usual PB free energy. For asymmetric, oppositely charged plates, the resulting expression predicts a non-trivial equilibrium position with the plates separated by a finite distance. The depth of this energy minimum is decisive for the stability of the complex. It is therefore crucial to obtain its explicit dependence on the charge densities of the plates and on the ion concentration. Analytic expressions for the position and depth of the energy minimum were derived in 1975 by Ohshima [Colloid Polym. Sci. 253, 150 (1975)] but, surprisingly, these important results seem to have been overlooked. We retrieve these expressions in a simpler formalism, more familiar to the physics community, and give a physical interpretation of the observed behavior.     

Investigation of a UV-laser generated waveguide in a planar polymer chip using an improved interferometric method

Polymeric integrated-optical waveguides are prepared in a planar polymer chip by UV-laser lithographic methods. The waveguide samples are irradiated by an excimer laser at a wavelength Λ=248 nm with various irradiation parameters (different fluencies and irradiation doses). Mach-Zehnder interferometer is employed and the refractive index depth profiles of the waveguide samples are obtained. This profile covers two regions having exponential and Gaussian shapes. The model field distributions strongly depend on the refractive index of each region. The mode field distribution and the effective mode indices for each region have been calculated on the basis of a theoretical model and the experimentally measured data.     

X-ray emission for Ar11+ ions impacting on various targets in the collisions near the Bohr velocity

X-ray emission from the collisions of 3 MeV Ar¹¹⁺ ions with V, Fe, Co, Ni, Cu, and Zn is investigated. Both the x-rays of the target atom and projectile are observed simultaneously. The x-ray yield is extracted from the original count. The inner-shell ionization cross section is estimated by the binary encounter approximation model and compared with the experimental result. The remarkable result is that the Ar K-shell x-ray yield is diminished with the target atomic number increasing, which is completely opposite to the theoretical calculation. That is interpreted by the competitive consumption of the energy loss for the ionization of inner-shell electrons between the projectile and target atom.     

Recent advances of ultrasonic testing of cement based materials at early ages

To summarize some of the most important findings in the field of ultrasonic (US) testing of early age hydration and formation of structure of different cement based materials (CBMs), a review of literature with focus on US P-wave transmission and S-wave reflection methods is presented in this paper. The review shows a great ability of both US techniques to observe setting phenomena and to determine different milestones during the early age formation of CBM’s microstructure. Clear physical basis, high accuracy, and non-destructive nature of the method indicate that US methods could become standardized in the near future.     

Stable blow-up dynamics in the -critical and -supercritical generalized Hartree equation

We study stable blow-up dynamics in the generalized Hartree equation with radial symmetry, which is a Schrödinger-type equation with a nonlocal, convolution-type nonlinearity: First, we consider the -critical case in dimensions and obtain that a generic blow-up has a self-similar structure and exhibits not only the square root blowup rate , but also the log-log correction (via asymptotic analysis and functional fitting), thus, behaving similarly to the stable blow-up regime in the -critical nonlinear Schrödinger equation. In this setting, we also study blow-up profiles and show that generic blow-up solutions converge to the rescaled , a ground state solution of the elliptic equation . We also consider the -supercritical case in dimensions . We derive the profile equation for the self-similar blow-up and establish the existence and local uniqueness of its solutions. As in the NLS -supercritical regime, the profile equation exhibits branches of nonoscillating, polynomially decaying (multi-bump) solutions. A numerical scheme of putting constraints into solving the corresponding ordinary differential equation is applied during the process of finding the multi-bump solutions. Direct numerical simulation of solutions to the generalized Hartree equation by the dynamic rescaling method indicates that the is the profile for the stable blow-up. In this supercritical case, we obtain the blow-up rate without any correction. This blow-up happens at the focusing level , and thus, numerically observable (unlike the -critical case). In summary, we find that the results are similar to the behavior of stable self-similar blowup solutions in the corresponding settings for the nonlinear Schrödinger equation. Consequently, one may expect that the form of the nonlinearity in the Schrödinger-type equations is not essential in the stable formation of singularities.     

An analysis of peak overpressures in vented gaseous explosions

Experimental data from vented explosion tests using stoichiometric methane–air and 18% hydrogen–air mixtures in a 63.7 m³ chamber with a 2.7 or 5.4 m² vent are presented. Results from experiments conducted using stoichiometric propane–air in 2.42 m³ vessel with a 0.26 m² vent are also reported. The tests were focused on the effect of fuel, enclosure size, ignition location, vent size, and obstacles on the pressure development of a propagating flame in a vented enclosure. The dependence of the maximum pressure generated on the experimental parameters was analyzed. It was found that the pressure maxima may be caused by pressure transients controlled by the interplay of the maximum-flame area, the burning velocity, and the overpressure generated by an external explosion. A simple model was proposed to estimate the maximum pressure for each of the main pressure transients. The model was found to agree with the experimental data within the experimental uncertainty.     

Combining GPS carrier phase and Doppler observations for precise velocity determination

The truncation error and propagation error are analyzed for velocity determination through differential GPS carrier phase observations,and an approach for the choice of the best number of points for the central difference method is developed.In order to overcome the disadvantages of existing GPS velocity determination methods,a new velocity determination algorithm is presented,based on combining carrier phase and Doppler observations.The basic idea is that two types of observation are combined by adding the...     

The secondary X-ray fluorescence and absorption near the interface of multi-material: Case of EDS microanalysis

A simple model is proposed to take into account secondary X-ray fluorescence and absorption effects near the interface. This model is based on the investigation of the shape change of the first derivative equation that can fit the sigmoidal EDS profile obtained when a high vacuum electron beam passes through the interface of two adjacent materials. The contribution of the photoelectric absorption of primary X-rays (characteristic and Bremsstrahlung) and the secondary fluorescence on the degradation of the X-ray spatial resolution can be easily quantified. The close agreement between the simulated (Monte Carlo simulation using the Casino software) and the experimental data serves to assess the reliability of this developed model.