普通物理实验教学改革的实践与思考

本文介绍了近年来普通物理实验课程体系和教学内容改革的实践,并针对目前实验教学中仍存在的一些问题提出了开放式实验教学的改革思路。     

为实现准等熵压缩的波阻抗梯度飞片的实验研究

采用粉末冶金方法,制备出波阻抗沿厚度方向呈特定分布的WMoTi体系梯度飞片,在二级轻气炮上进行了梯度飞片击靶实验的初步研究.结果表明,利用梯度飞片可以实现对靶样品的准等熵压缩,击靶后产生的波阵面是平缓、连续上升的,明显不同于冲击压缩的陡峭波阵面,靶面压力峰值最高达到了167GPa.波阻抗按二次函数分布的梯度飞片能够获得最佳的击靶波形 关键词： 波阻抗梯度飞片 准等熵压缩     

The Millimeter Wave Tomography Application for the Subsurface Imaging

In the present paper new results of modeling and experimental investigation on millimeter wave subsurface tomography are submitted. Tomographic algorithm is employed for imaging of subsurface objects in the case when conductivity of probed medium is not equal to zero. The possibilities and restrictions of this algorithm for image processing are shown both as a result of modeling and as a result of experiments. A new tomography setup allowing obtaining images of different inhomogeneities in dielectric media is considered.     

超细CaO粉炉内喷射脱硫的实验研究

本文对超细ＣａＯ粉炉内喷射脱硫进行了实验研究，分析了可能影响超细ＣａＯ粉炉内脱硫效率的多种因素，实验结果表明：使用预先锻烧生成的超细ＣａＯ粉在并不苛刻的反应条件下脱硫效果很好，颗粒大小、反应区温度、反应时间和Ｃａ／Ｓ比对炉内喷钙脱硫的效率有重要的影响．     

金属薄膜制备及物性测量系列实验

介绍了由模拟真空实验和“金属薄膜的制备”、“金属薄膜厚度的测量”、“金属薄膜电阻率的测量”,以及“金属薄膜生长过程的动态监测”等4个实验组成的金属薄膜制备与物性测量系列实验.这组实验与现代科学技术发展联系紧密,仪器设备可靠,操作简单,适合于普通物理实验阶段的研究性教学.     

High-order accurate equations describing vibrations of thin bars

A method for deriving one-dimensional wave propagation equations in thin inhomogeneous anisotropic bars based on the mathematical homogenization theory for periodic media is used to obtain equations governing the longitudinal and transverse vibrations of a homogeneous circular bar. The equations are derived up to O(ε⁸) terms and take into account variable body forces and surface loads. Here, ε is the ratio of the bar’s typical thickness to the typical wavelength.     

Comparison of growth stress measurements with modelling in thin iron oxide films

High temperature oxidation of metals leads to residual stresses both in the metal and in the growing oxide. In this work, the evolution of this residual stresses is theoretically predicted in the growing oxide layers. The origin of these stresses is based on a microstructural model. Using experimental results providing from the oxidation kinetics, and an analysis proposed to describe the growth strain occurring in the thin layers, a set of equations is established allowing determining the stresses evolution with oxidation time. Then, the model is compared with experimental results obtained on both α-Fe and phosphated α-Fe, oxidised at different temperatures. Numerical data are extracted from experiments either with an asymptotic formulation or with an inverse method. These two methods give good agreement with experiments and allow extracting the model parameters.     

计算机辅助物理实验教学的几点思考

探讨了物理实验教学引入智能化仪器的必要性和意义，指出引入计算机辅助教学必须对传统的实验教学内容和方法重新设计，同时软件的设计应给学生留有接口的余地。     

自制金割效应物理摆的研究性实验

金割效应物理摆是将数学中的优选法与物理实验中的复摆结合起来并用计算机处理数据的自制教学仪器.把金割效应物理摆作为研究性实验进行开设,更有利于培养学生的开拓精神和创新能力.     

用AD590自组数字温度计的设计实验

本介绍了用ADS90自组数字温度计实验，说明了实验步骤和数据处理等过程。