HCSB-DEMO�������������ȷ�����������

根据HCSB-DEMO堆的设计要求,对不同尺寸的聚变堆能产生的聚变功率、中子壁负载和等离子体燃烧时间等进行计算与分析,给出了符合设计要求的堆芯参数。在所选定的堆芯参数条件下进行了零维功率平衡计算分析,给出了3组HCSB-DEMO堆的等离子体初步设计参数。     

Simulation of non-selfadjoint control of thin elastic plates in the presence of conservative in-plane forces

Summary Based on the analysis presented in [1], a closed-form solution for the response of a controlled plate to a transversely applied dynamic loading is presented. Both the applied loading and the control are considered to be continuously distributed. The results and the corresponding parametric study are presented for two common boundary conditions of SSSS and SFSF in the plates. Received 11 March 1997; accepted for publication 18 March 1998     

Integration of equipment planning and project scheduling

It is common to schedule project activities first, then the utilization of equipment and its operating crew is planned based on such schedule. Real world experiences indicate that activity scheduling can be heavily impacted by the resources needed. In particular, if a project requires highly specialized and expensive equipment type, then one needs to take into account the schedule and cost of such resources in developing the project schedule.     

Solving the pallet loading problem

This paper presents new bounds, heuristics, and an exact algorithm for the Pallet Loading Problem (PLP). PLP maximizes the number of boxes placed on a rectangular pallet. All boxes have identical rectangular dimensions and, when placed, must be located completely within the pallet. Boxes may be rotated 90° so long as they are placed with edges parallel to the pallet’s edges. The set of all PLP instances with an area ratio (pallet area divided by box area) less than 101 boxes can be represented by 3,080,730 equivalent classes. Our G5-heuristic finds optimal solutions to 3,073,724 of these 3,080,730 classes and in the remaining 7006 classes only differs from the best known bound by one box. We develop three other heuristics that solve another 54 instances. Finally, we solve the 6952 remaining classes with our exact HVZ algorithm. Only a subset of these classes has been solved previously.     

强脉冲载荷作用下弹-塑性薄圆板的大挠度动力响应

利用有限变形弹塑性连续体的最小加速度原理 ,建立了分析圆板动力响应问题的数值方法 ,并通过对均匀分布的脉冲载荷作用下铰支圆板位移响应的细致分析 ,探讨了响应过程中的饱和冲量现象 ,指出对于高载范围内的脉冲载荷 ,相应于最大变形的饱和冲量确实是存在的。结果还表明 ,虽然圆板的弹塑性动力分析非常复杂 ,但基于最小加速度原理的数值计算方法却具有简单、直接的优点。     

Multicriteria Optimal Design of a Rectangular Composite Plate Subjected to Biaxial and Thermal Loading

Multicriteria optimization of the structure and geometry of a laminated anisotropic composite plate subjected to the thermal and biaxial action is considered. From known properties of the monolayer and the given values of variable structural parameters, the thermoelastic properties of the layered composite are determined. The criteria to be optimized—the transverse critical load and the longitudinal thermal stresses—depend on two variable design parameters of composite properties and temperature. In the space of the optimization criteria, the domain of allowable solutions and the Pareto-optimal subdomain are found. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 5, pp. 683–690, September–October, 2005.     

Compromise optimization of a rectangular composite plate subjected to biaxial thermal loading and buckling under the action of shear

The compromise optimization of the structure and geometry of a laminated anisotropic composite plate subjected to biaxial thermal shear loading is considered. From the known properties of the monolayer and given values of a variable structural parameter, the thermoelastic properties of the layered composite are determined. The optimization criteria — the critical shear load and the longitudinal and transverse thermal stresses — depend on two variable design parameters of composite properties and temperature. In the space of optimization criteria, the domain of allowable solutions and the Pareto-optimal subregion are found. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 44, No. 4, pp. 471–478, July–August, 2008.     

Vibration and dissipative heating of a layered rectangular viscoelastic prism under harmonic shear loading

The vibration and vibrational heating of a rectangular prism with copper and polyethylene layers is studied by solving numerically a coupled problem of thermoelasticity. The cases of kinematic and mechanical harmonic shear loads on a section of the prism surface are examined. Local heating regions are revealed. They are due to the stress fields in the neighborhood of the points at which the type of boundary conditions changes. The temperature–time curves have preresonance, resonant, and postresonance sections. The heating process reaches a steady thermal state under kinematic loading and may become avalanche-like (which is typical of thermal instability) under mechanical loading Translated from Prikladnaya Mekhanika, Vol. 45, No. 2, pp. 70–78, February 2009.     

原位低场核磁共振弛豫法定量监测光催化Cr(Ⅵ)还原反应

本文利用原位低场核磁共振（LF-NMR）技术在真实固液反应环境中对光催化还原Cr（Ⅵ）反应进行了定量研究,并对Ag纳米颗粒负载量不同的Ag担载石墨相氮化碳复合光催化剂（Ag/g-C₃N₄）在可见光照射下催化Cr（Ⅵ）还原为Cr（Ⅲ）的性能进行了研究.研究发现,Ag纳米颗粒负载（负载量分别为1 wt.%、2 wt.%、5 wt.%和10 wt.%）可以有效提高g-C₃N₄的光催化性能;且负载量为5 wt.%时光催化性能最优,为无Ag负载的g-C₃N₄的4倍.此外,本文还通过横向弛豫时间（T₂）定量分析了反应体系中顺磁性Cr（Ⅲ）离子的浓度,证实了采用LF-NMR弛豫法评价光催化Cr（Ⅵ）还原反应性能的可行性.