Damage resistance of carbon fibre reinforced epoxy laminates subjected to low velocity impact: Effects of laminate thickness and ply-stacking sequence

A major concern affecting the efficient use of composite laminates is the effect of low velocity impact damage on the structural integrity [1–3]. The aim of this study is to characterize and assess the effect of laminate thickness, ply-stacking sequence and scaling technique on the damage resistance of CFRP laminates subjected to low velocity impact. Drop-weight impact tests are carried out to determine impact response. Ultrasonic C-scanning and cross-sectional micrographs are examined to assess failure mechanisms of the different configurations.It is observed that damage resistance decreases as impact energy increases. In addition, thicker laminates show lower absorbed energy but, conversely, a more extensive delamination due to higher bending stiffness. Thinner laminates show higher failure depth. Furthermore, quasi-isotropic laminates show better performance in terms of damage resistance. Finally, the results obtained demonstrate that introducing ply clustering had a negative effect on the damage resistance and on the delamination area.     

Progress in thermal-mechantical effects induced by laser

对激光辐照诱导的热与力学问题研究进展进行了综述,包括材料在高温、高升温速率下的本构关系,典型薄板和柱壳等结构在激光辐照下的热力破坏效应,多层材料体系的激光破坏行为等几个方面,并着重介绍了包含相变与烧蚀过程的激光破坏分析模型与机制研究,激光辐照效应的流-热-固耦合数值模拟方法,以及短脉冲激光引起的冲击与破坏机理等方面的研究新进展.     

Dynamic compression-shear response of brittle materials with specimen recovery

A new configuration for compression-shear soft-recovery experiments is presented. This technique is used to investigate various failure mechanisms during dynamic multiaxial loading of an Al₂O₃/SiC nanocomposite and TiB₂. Velocity profiles of the target surface are measured with a variable sensitivity displacement interferometer, yielding normal and transverse velocity-time histories. A dynamic shear stress of approximately 280 MPa is obtained, in the Al₂O₃/SiC nanocomposite, for an imposed axial stress of about 3.45 GPa on a 540 m thick sample. This dynamic shear stress is well below the value predicted by elastic wave propagation theory. This could be the result of stress-induced damage and inelasticity in the bulk of the sample or inelasticity on the sample surface due to frictional sliding. To gain further insight into the possible failure mechanisms, an investigation of compression-shear recovery techniques, with simultaneous trapping of longitudinal and lateral release waves, is conducted.     

具确定弱区域正交各向异性薄板的弹塑性屈曲分析

基于弹塑性力学和损伤理论,建立了一个与应力球张量有关的具损伤正交各向异性材料的混合硬化屈服准则,该准则无量纲化后与各向同性材料的Mises准则同构,在此基础上,建立了正交各向异性材料的增量型和全量型弹塑性损伤本构方程,并以具确定弱区域正交各向异性矩形薄板为例,根据屈曲时的能量准则和全量理论,以等效塑性应变为内变量,对其弹塑性屈曲问题进行了分析,讨论了几何参数和弱区域对正交各向异性薄板弹塑性屈曲临界应力的影响.     

压电传感器探测层合板分层的数值分析

用修正的准三维有限元法分析了受单轴拉伸表面覆盖有压电薄膜的复合材料层合板。文中首先讨论了压电薄膜层对层合板层间应力的影响，然后在存在分层裂纹的情况下，计算了压电层的电压分布。结果表明将压电薄膜作为传感器来进行分层探测是可行的。文中最后考虑了多种因素对传感灵敏度的影响。     

含纳米粒子溶液对单晶硅表面的冲蚀磨损损伤实验研究

利用高分辨透射电子显微镜和原子力显微镜观察了含纳米颗粒溶液冲蚀硅片表面损伤行为,考察了纳米颗粒碰撞单晶硅片所导致的微观物理损伤.结果表明:冲蚀30 s后,在高分辨透射电子显微镜下可见硅片表面呈现方向性损伤,并可观察到大量非均匀的晶格缺陷;当冲蚀10 min时,硅片表面出现微观划痕和凹坑,在划痕一端可见原子堆积,亚表面可观察到镶嵌晶粒的非晶损伤层;继续延长冲蚀时间将加剧其表面损伤.     

ANALYSIS OF THE LOCALIZATION OF DAMAGE AND THE COMPLETE STRESS-STRAIN RELATION FOR MESOSCOPIC HETEROGENEOUS ROCK UNDER UNIAXIAL TENSILE LOADING

The mechanical behavior of rock under uniaxial tensile loading is different from that of rock under compressive loads. A micromechanics-based model was proposed for mesoscopic heterogeneous brittle rock undergoing irreversible changes of their microscopic structures due to microcrack growth. The complete stress-strain relation including linear elasticity, nonlinear hardening, rapid stress drop and strain softening was obtained. The influence of all microcracks with different sizes and orientations were introduced into the constitutive relation by using the probability density function describing the distribution of orientations and the probability density function describing the distribution of sizes. The influence of Weibull distribution describing the distribution of orientations and Rayleigh function describing the distribution of sizes on the constitutive relation were researched. Theoretical predictions have shown to be consistent with the experimental results.     

MICROMECHANICAL MODELLING OF STRAIN SOFTENING IN MICROCRACK-WEAKENED QUASI-BRITTLE MATERIALS

By using the concept of domain of microcrack growth(DMG),themicromechanisms of damage in quasi-brittle materials subjected to triaxial either tensileor compressive loading are investigated and the complete strew-strain relation includingfour stages is obtained from micromechanical analysis.The regime of pre-peaknonlinear hardening corresponds to the distributed damage,i.e.the stable propagationof microcracks.After the attainment of the ultimate strength of load-bearing capacity,some microcracks experience the second unstable growth and the distributed damage istransmitted to the localization of damage.These analyses improve our understanding ofthe hardening and softening behaviors of quasi-brittle materials.     

Electrochemical biosensing for dsDNA damage induced by PbSe quantum dots under UV irradiation

<正>An electrochemical sensor for the detection of the natural double-stranded DNA(dsDNA) damage induced by PbSe quantum dots(QDs) under UV irradiation was developed.The biosensing membranes were prepared by successively assembling 3- mercaptopropionic acid,polycationic poly(diallyldimethyl ammonium) and dsDNA on the surface of the gold electrode.Damage of dsDNA was fulfilled by immersing the sensing membrane electrode in PbSe QDs suspension and illuminating it with an UV lamp. Cyclic voltammetry was utilized to detect dsDNA damage with Co(phen)_3~(3+) as the electroactive probe.The UV irradiation,Pb~(2+) ions liberated from the PbSe QDs under the UV irradiation and the reactive oxygen species(ROS) generated in the presence of the PbSe QDs also under the UV irradiation were the three factors of inducing the dsDNA damage.The synergistic effect of the three factors might dramatically enhance the damage of dsDNA.This electrochemical sensor provided a simple method for detecting DNA damage,and may be used for investigating the DNA damage induced by other QDs.     

Magnetic bead-based approach to monitoring of cigarette smoke-induced DNA oxidation damage and screening of natural protective compounds

Cigarette smoking can damage DNA and induce spontaneous mutagenesis or carcinogenesis. Here, we describe a novel strategy for in situ monitoring of cigarette smoke-induced DNA oxidation damage and offer a method for screening natural compounds that protect DNA against tobacco smoke. The present protocol takes advantage of a fast and simple magnetic separation/mixing method and a highly sensitive chemiluminescence (CL) ELISA. The DNA immobilized on the magnetic beads was oxidized by the smoke in the absence or presence of natural compounds, and then oxidative DNA was conveniently held by magnetic force, whereas the complex tobacco smoke matrix and any remaining compounds were completely eliminated by extensive washing, and possible interferences were thus removed and oxidative damage was then sensitively monitored by CL ELISA. A library of 32 natural products was then screened and three were found to protect DNA from oxidative damage and thus may be promising compounds for the development of new drugs. Moreover, the protection effect of these three natural compounds against DNA oxidation damage was successfully classified by directly spiking them in the reference cigarettes. In addition, the potential to screen a mixture in a complex sample matrix, such as crude extracts, was also demonstrated, and hence the proposed technique can screen compounds within a complex matrix and enhance the screening throughput.