Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative ζ potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces.     

Optimum gas chromatographic conditions in wall-coated capillary columns. Extended and simplified forms of the Golay-equation

Band broadening in capillary columns is satisfactorily described by the Golay-equation extended to situations of appreciable pressure drop by Giddings. In practice, however, several simplifications are often made. The effect of these simplifications on the calculated values of the minimum plate height and optimum carrier gas velocity are treated systematically.     

Das Düsenschwellphänomen beim Austritt einer wandhaftenden anorganischen Glasschmelze aus Strangpreßwerkzeugen mit nichtkreisförmigem Öffnungsquerschnitt

Zusammenfassung Eine ausgeprägte Strangaufweitung tritt bei anorganischen Glasschmelzen dann auf, wenn bei schleichender Strömung eine Haftung zwischen der Wand des Matrizenkanals und dem strömenden Medium gegeben ist. Sie rührt dabei von der Umorientierung der Geschwindigkeitsverteilung von einem parabelförmigen zu einem kastenförmigen Profil her.In den experimentellen Untersuchungen konnte festgestellt werden, daß oberhalb einer bestimmten Kanallänge, d. h. bei ausgeprägten Strömungsverhältnissen im Preßwerkzeug die flächenbezogene Strangaufweitung konstant und dabei insbesondere unabhängig von der Profilform etwa 29% beträgt. Daraus wird gefolgert, daß dieser Betrag dem linearen Wert für den zweidimensionalen Fall des unendlich ausgedehnten Spaltes entsprechen muß.In einer theoretischen Analyse wurde die Berechnung dieses Falles ausgehend von der Stokes-Gleichung mit Hilfe der Methode der finiten Elemente durchgeführt. Aus der sich daraus ergebenden Druck- und Geschwindigkeitsverteilung konnte schließlich die Kontur des austretenden Stranges sowie dessen Endhöhe ermittelt werden.Ein Vergleich der experimentell und rechnerisch ermittelten Werte für die Strangaufweitung zeigt dabei eine recht gute Übereinstimmung und bestätigt dadurch auch die weitgehende Unabhängigkeit der flächenbezogenen Aufweitung von der Querschnittsform des Stranges.

---

Inorganic glass melts are showing a characteristic die swell, when in the case of slow motion a strong adhesion between the streaming fluid and the wall of the die channel exists. The reason for this phenomenon is the rearrangement of the velocity profile from a parabolic to a box-type design form.The experimental investigations have demonstrated, that above a certain channel length, this means at distinct flow conditions inside the die channel, the value for the extension of the cross-sectional area is constant of about 29%. Particularly it is independent of the shape of the used die profiles. From this result, it is to deduce that this value must correspond to that of the two-dimensional case of the infinite extended slit.In a theoretical analysis the computation of this case was performed, starting from the Stokes-equation by the finite element method. By means of the resulting pressure and velocity distribution, the contour of the emerging rod and its final thickness could be determined.A comparison between experimental and computational results shows good agreement. So the appreciable independence of the magnitude of the die swell from the profile of the extruded rod is confirmed.

---

A Fläche - a ^p ,a ^u Knotenpunktsvariablen für Druck bzw. Geschwindigkeit - a, b Seitenlängen des Rechteckprofils - B =L · N ^u Matrix - D Viskositätsmatrix - f Kräftematrix - K Schwerkraftvektor - K ^p ,K ^u Elementdruckmatrix, Elementgeschwindigkeitsmatrix - L Transformationsmatrix für den ebenen Fall - m Kronecker-Symbol für den zweidimensionalen Strömungszustand - N ^p ,N ^u Ansatzfunktionsmatrizen für Druck bzw. Geschwindigkeit - p Preßdruck - R Radius - T Preßtemperatur - t Lastvektor - u = (w, v) Geschwindigkeitsvektor - _A flächenbezogene Strangaufweitung - _R Aufweitung einer linearen QuerschnittsabmessungR - dynamische Viskosität - Dichte - D u/Dt Substantielle Ableitung der Geschwindigkeit nach der Zeit - T Transponierte einer Matrix (oberer Index) Vorgetragen auf der Jahrestagung der Deutschen Rheologischen Gesellschaft in Berlin vom 13.–15. Mai 1985     

Measurement of attachment force of microbial cells

A parallel-plate flow chamber consisting of two transparent electro-conductive glass plates was constructed. The two glass plates were set parallel to each other and connected to a potentiostat apparatus to regulate the strength of the electric field between the plates. A microbial cell suspension was flowed through the chamber. This system enabled the application of an electrostatic force to suspend charged particles, e.g. microbial cells, existing between the two plates. The time course of the cell attachment of Pseudomonas syringae pv. atropurpurea NIAES 1309 suspended in 10 mM phosphate buffer solution (pH 7.0) to the glass plate was investigated at various electric field strengths ranging from −4.2 to +4.1 V cm⁻¹. The attachment rate and the maximum number of attached cells increased linearly with the increase in the strength of the positive electric field. In contrast, the rate and the number of cells decreased linearly with the decrease in the strength of the negative electric field. These linear relations gave a specific value for the strength of the electric field (−5.9 ± 0.7 V cm⁻¹) where the electrostatic repulsion and the microbial attachment force were thought to be equal, resulting in no cell attachment. From this value, the electrostatic repulsion, i.e. the microbial attachment force, was calculated to be 5.0 × 10⁻¹¹ N cell⁻¹ for cells of average size.     

稀土变质热锻模具铸钢高温磨损性能的研究

研究了稀土（RE）变质热锻模具铸钢的高温磨损性能，并与热锻模具钢H13钢和3Cr2W8V钢进行对比，探讨了稀土元素的作用和热锻模具铸钢的高温磨损机理。结果表明：随着RE加入量的增加，热锻模具铸钢的磨损率先减后增，RE加入量在质量分数为0．05％时热锻模具铸钢具有最佳的高温磨损性能。RE变质热锻模其铸钢的高温耐磨性明最高于H13钢和3Cr2W8V钢。高温磨损机理为氧化磨损和氧化物的疲劳剥落，磨屑为块状的Fe2O3和Fe3O4。     

The theoretical basis of column chromatography in multicomponent separations. Part 2: Peak capacity. Column systems with good selectivity

The selectivity of a column system, S, defined by equation 28, includes a variation coefficient (β) of plate number with capacity ratio which has a large influence on the peak capacity, as shown in Fig. 18. Some typical chromatograms are given. In order to predict S for a column system from Kovat's Index, equations 40 and 41 are given to calculate the constant of the carbon number rule for squalane at different temperatures or for different stationary phases. The specific retention value of heptane on squalane at different temperatures can be calculated from equation 42. The nonpolarity index, defined by equation 43, was used to calculate the retention value of heptane on various stationary phases. In liquid chromatography, the order of elution may be reversed by changing the composition of the eluent on the same chemically bonded silica (manufactured in China). The linear relations between the log retention values of different kinds of solutes or of a single solute on the silicas of different surface areas when using the same eluent are given.     

Kinetics of the surface tension of micellar solutions: Comparison of different experimental techniques

The kinetics of the surface tension of micellar solutions of nonionic surfactant Triton X-100 is measured experimentally by means of three different techniques: oscillating jet, maximum bubble pressure and inclined plate. They allow to study the micellization kinetics at various time scales (from a few milliseconds to a few seconds) in fairly large concentration region up to 50 times CMC. The experimental data are satisfactorily explained by a theoretical model accounting for the kinetics of micellization, diffusion of surfactant species and expansion of the bubble interface. By this model are computed the characteristic times of diffusion and micellization, which are of comparable magnitude (about 5 to 200 ms), and the Gibbs' elasticity. The micellization time constant corresponds to the slow relaxation process known to coincide with the disintegration of micelles. Comparing our data with other data from literature one can conclude that more realistic information for the micellization kinetics is obtained by the maximum bubble pressure and the oscillating jet method. The inclined plate seems too slow to measure the relaxation processes in micellar solutions of this surfactant.     

Modification of HPTLC-plates by in situ chemical bonding with non-polar and polar organosilanes

A method has been developed for the preparation of modified silica plates for high performance thin-layer chromatography (HPTLC). Some typical organosilanes were thus allowed to react in situ with the silica of Merck HPTLC-plates. This method was found to be highly reproducible, simple and cheap. Non-polar plates were prepared and compared with commercial plates from Merck, Whatman and Macherey-Nagel. Modification with cyanodecyltrichlorosilane resulted in plates that showed good coverage, efficiency and low residual silica activity. Silica modified with a multifunctional silane has different properties in different organic solvents. It will appear to be non-polar in a polar solvent and vice versa. New advantageous separation systems are thus made feasible by the presence of cyano groups on the plate. The utility of modified thin-layer plates is demonstrated by the separation of some homologues of p-hydroxybenzoic acid esters and of some polycyclic aromatic hydrocarbons.     

Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. I. Self-organization of cationic polymer particles on alkylated glass plates

Monodisperse, cationic polymer particles bearing quaternary ammonium groups effectively self-organized on hydrophobic solid substrates such as alkylated glass plates and polymer films to form particle monolayers. With an increase of the particle surface charge density, the surface coverage decreased and the morphology of particle monolayers changed from aggregated type to dispersed type. The dispersed type of particle monolayers having a relatively regular particle distance was formed at higher temperature. The self-organization behaviors on alkylated glass plates were different from those on unmodified glass plates through electrostatic interaction. The formation of particle monolayers on alkylated glass plates occurred only over a certain latex concentration range in contrast with that on unmodified glass plate. The adhesive strength of particle monolayers was enhanced by annealing at temperatures above the glass transition temperature (T _g) of the particles. Lens-shaped particle monolayers were fabricated by annealing the dispersed type of particle monolayers.