Fractionation and purification of antioxidant peptides from Chinese sturgeon (Acipenser sinensis) protein hydrolysates prepared using papain and alcalase 2.4L

Protein hydrolysates have the potential to be natural and safer sources of bioactive peptides. In this study, two proteases were used to hydrolyze Chinese sturgeon (Acipenser sinensis) protein, and the hydrolysates were then purified to yield antioxidant peptides. The degree of hydrolysis of 23.56 % and 18.14 % was obtained using papain and alcalase 2.4L, respectivly, and hydrolysates had 96.80 % and 87.24 % total amino acid content, respectivly. The papain hydrolysate (PH) and alcalase 2.4L hydrolysate (AH) showed good antioxidant activity against DPPH^? (IC₅₀ of 3.64 and 3.15 mg/mL) and ABTS^?+ (IC₅₀ of 1.92 and 1.58 mg/mL), respectively. The low-molecular-weight (<1000 Da) fraction of both hydrolysates demonstrated the highest antiradical activity (IC₅₀ of 2.59 and 2.31 mg/mL, DPPH) and (IC₅₀ of 1.54 and 1.36 mg/mL, ABTS), respectively. Nine peptides were separated from both hydrolysates using reverse phase high performance liquid chromatography (RP-HPLC). The IC₅₀ for ABTS^?+ scavenging activity of peptide P5 with valine, glycine and asparagine (MW of 282.13 Da) from PH, and peptide P3 with histidine, glycine and alanine (MW of 302.74 Da) from AH was 0.89 and 0.72 mg/mL, respectively. The fractions and purified peptides obtained from Chinese sturgeon hydrolysates could be utilized as natural antioxidant substitutes in pharmaceuticals and food products.     

Molecular entity vacancy model

A novel molecular entity vacancy model was proposed to describe thermodynamic properties in a multicomponent solution system using its binary interaction parameters only. A derivation of the model for its general expression has been shown in detail. Under some special conditions, this model may be reduced to Flory–Huggins equation, Wilson equation and non-random two liquids (NRTL) equation as well as molecular interaction volume model (MIVM), respectively, and can be verified by Gibbs–Duhem equation, and can express thermodynamic properties of partially miscible systems. The predicted activities are in good agreement with experimental data of some liquid alloys. The results show that the model is of better predictability and reliability because it has a certain physical basis.     

Etude Experimentale et Modelisation des Equilibres Solide—Liquide du Systeme Binaire H2O—UO2(NO3)2

The binary system H₂O—UO₂(NO₃)₂ was studied by solubility measurements and constant heat flow thermal analysis. Temperature and composition of the eutectic transformation between ice and uranyl nitrate hexahydrate were accurately defined. A new hydrate with 24 molecules of water decomposes at –21°C according to the peritectoid reaction<UO₂(NO₃)₂·24H₂O> <UO₂(NO₃)₂·6H₂O> + 18<H₂O>The quasi-ideal model was applied to the solid—liquid equilibria, using the following reaction hypothesis:((UO ₂ ²⁺ )) + 2((NO ₃ ^– ))+ h((H₂O)) ((UO₂OH⁺aq)) + ((H₃O⁺aq + 2((NO ₃ ^– aq))A complete calculation of the binary system was carried out with a global ionic hydration number h equal to 9 in the aqueous solutions. It allowed to the melting enthalpies of uranyl nitrate hydrates.

This revised version was published online in November 2005 with corrections to the Cover Date.     

Influence of silica gel pretreatment and bonding technique on PAH selectivity of octadecyl bonded phases

Summary The effect of silica gel pretreatment and of different bonding techniques, on the chromatographic properties of octadecyl bonded phases is described. The experiments show that a monomeric octadecyl bonded phase, prepared from silica gel that has not been treated before bonding, has a poor selectivity towards polycyclic aromatic hydrocarbons (PAHs) and shows high adsorption of basic components. Silica gel treatment before the bonding of the monofunctional silane does not give a substantial improvement. Polymeric phases on the other hand show a much better PAH selectivity and a lower adsorptivity towards basic components. Further improvement can be achieved with the polymeric modification if silica gel treatment is carried out before bonding.     

Modified AutoDock for accurate docking of protein kinase inhibitors

Protein kinases are an important class of enzymes controlling virtually all cellular signaling pathways. Consequently, selective inhibitors of protein kinases have attracted significant interest as potential new drugs for many diseases. Computational methods, including molecular docking, have increasingly been used in the inhibitor design process [1]. We have considered several docking packages in order to strengthen our kinase inhibitor work with computational capabilities. In our experience, AutoDock offered a reasonable combination of accuracy and speed, as opposed to methods that specialize either in fast database searches or detailed and computationally intensive calculations.However, AutoDock did not perform well in cases where extensive hydrophobic contacts were involved, such as docking of SB203580 to its target protein kinase p38. Another shortcoming was a hydrogen bonding energy function, which underestimated the attraction component and, thus, did not allow for sufficiently accurate modeling of the key hydrogen bonds in the kinase-inhibitor complexes.We have modified the parameter set used to model hydrogen bonds, which increased the accuracy of AutoDock and appeared to be generally applicable to many kinase-inhibitor pairs without customization. Binding to largely hydrophobic sites, such as the active site of p38, was significantly improved by introducing a correction factor selectively affecting only carbon and hydrogen energy grids, thus, providing an effective, although approximate, treatment of solvation.     

Magnetic field effects on the crystal orientation and surface morphology of electrodeposited iron films

The effects of a magnetic field (5 T) on crystal orientation and surface morphology were investigated for iron films electrodeposited in ferrous aqueous solution. XRD measurements for the iron films showed that the preferred orientation parallel to the substrate was determined by the current density and not influenced by the magnetic field. By X-ray pole figure measurements, however, the crystal texture of the iron films electrodeposited at 10 mA cm^–2 and 30 mA cm^–2 was found to be controlled by the magnetic field. That is, the (110) planes were orientated in same direction of the magnetic field vector at angles of 30° and 35° to the direction normal to the substrate plane at 10 mA cm^–2 and 30 mA cm^–2, respectively. When the morphology was observed by SEM, iron grains at 30 mA cm^–2 changed from a triangular pyramid shape at 0 T to a complex star-like shape at 5 T.Presented at the 3rd International Symposium on Electrochemical Processing of Tailored Materials held at the 53rd Annual Meeting of the International Society of Electrochemistry, 15–20 September 2002, Düsseldorf, Germany     

Resolution of triacylglycerol positional isomers by reversed-phase high-performance liquid chromatography

The ability of reversed-phase high-performance liquid chromatography (RP-HPLC) to separate some positionally isomeric disaturated and monounsaturated triacylglycerols (TAGs) as intact species is demonstrated for the first time. Mobile phases of acetonitrile modified with methanol, ethanol, 2-propanol, 1-propanol, 1-butanol, acetone, or dichloromethane were tested for the separation of POP-PPO, PLP-PPL, PEP-PPE, and PDP-PPD (P-palmitic, O-oleic, L-linoleic, E-eicosapentaenoic, D-docosahexaenoic acid residue) on a single RP-HPLC column. The resolution improved with increasing number of double bonds in the acyl residues. While POP and PPO were only partially resolved, PDP and PPD were fully separated with all tested mobile phases, except those containing methanol. Also separated were the four TAGs having the same equivalent carbon number (ECN = 42), PEP, PPE, PDP, and PPD, on a single RP-HPLC column with mobile phase acetonitrile-2-propanol (70:30, v/v) at 0.8 mL/min. In all cases the isomer with the unsaturated acyl residue in either 1- or 3-position was retained more strongly than the respective 2-isomer.     

Fast Multi‐residue Screening for 84 Pesticides in Tea by Gas Chromatography with Dual‐tower Auto‐sampler,Dual‐column and Dual Detectors

A fast multi‐residue screening method for determining pesticides in tea is described. Pesticides are extracted from tea with acetone and methylene chloride, then enriched and cleaned up with solid phase extraction (SPE) prior to gas chromatographic determination. The fast screening is achieved by a gas chromatograph system equipped with dual‐column, dual‐tower auto‐sampler and both electron capture detector (ECD) and flame photometric detector (FPD). Optimal conditions are investigated for the prospective pesticides including column selection, detection mode, the retention behaviors, quantitative calibration, as well as the recoveries and repeatability of pesticides from tea samples. Under the optimal conditions, with the FPD‐P detector accompanied CP‐SIL 13CB column, 48 pesticides can be separated well and detected within 38 min; and with a DB‐5 column, 35 ECD‐detectable pesticides can be separated and detected within 46 min. The recoveries of 84 pesticides in tea samples are 65–120% with 0.34–16% RSD for spiking 0.02–3.0 mg/kg standard species. Because of the thermal instability of most pesticides, direct cold extraction of pesticides from a tea sample is recommended. The proposed method provided a very fast and efficient procedure to screen 84 pesticides from a complicated tea sample matrix.     

Enhancing the sensitivity of capillary electrophoresis using a microcolumn solid phase extraction setup

In this paper, a setup called micro‐column solid phase extraction (MicroSPE) was developed to enhance the sensitivity of capillary electrophoresis. The setup consists of a manual pump, several insulin syringes, and a Teflon extraction cartridge. The cartridge was made of 2–4 mm irregular C₁₈ solid phase materials in a Teflon tube (375 μm ID) with glass fiber frits. Two pieces of capillary tubing were connected to both the ends of the cartridge. Using sulindac‐spiked urine as the test sample, the extraction and analytical conditions were investigated in detail. When 1 μL 70/30 methanol/water was applied as the elution solvent, satisfactory results could be obtained. The internal standard method was used to quantitatively determine the compound in urine. The detection limit for sulindac was 2.9 ng/mL and the enrichment factor reaches more than 260. The result illustrates that the MicroSPE setup has a significant concentrating effect and is suitable for preconcentrating and cleaning‐up samples with complex matrices.     

Applications of Thermal Analysis and Coupled Techniques in Pharmaceutical Industry

Thermal analysis methods are well-established techniques in research laboratories of pharmaceutical industry. The robustness and sensitivity of instrumentation, the introduction of automation and of reliable software according to the industrial needs widened considerably the areas of applications in the last decade. Calibration of instruments and validation of results follow the state of the art of cGMP as for other analytical techniques. Thermal analysis techniques are especially useful for the study of the behavior of the poly-phasic systems drug substances and excipients and find a unique place for new delivery systems. Since change of temperature and moisture occur by processing and storage, changes of the solid state may have a considerable effect on activity, toxicity and stability of compounds. Current requirements of the International Conference of Harmonisation for the characterization and the quantitation of polymorphism in new entities re-enforce the position of thermal analysis techniques. This challenging task needs the use of complementary methods. Combined techniques and microcalorimetry demonstrate their advantages. This article reviews the current use of thermal analysis and combined techniques in research and development and in production. The advantage of commercially coupled techniques to thermogravimetry is emphasized with some examples. This revised version was published online in August 2006 with corrections to the Cover Date.