低阻无箔渡越辐射振荡器励磁系统

为开展L波段低阻无箔渡越辐射高功率微波发生器的单次实验,设计了一种满足需要的电容器储能脉冲磁场系统。系统储能电容5.4 mF,设计的螺线管线圈长45 cm,其理论电感和电阻值分别为42 mH和0.66 。基于该设计,绕制了磁场线圈并搭建了实验平台,线圈实际电感和电阻值分别为40 mH和0.61 。目击靶实验进一步证实了励磁系统产生的导引磁场能够较好地约束电子束。     

基于光子晶体光纤中FWM的4×10 Gbit/s全光波长转换

 多波长转换对于增强波分复用光网络的灵活性具有重要意义。基于光子晶体光纤中的多四波混频原理,实现了4×10 Gbit/s全光波长转换,深入调查了泵浦功率、光纤长度、信号光与泵浦光偏振失配对波长转换信号质量的影响。结果表明：当泵浦光功率从6 dBm到20 dBm增长的过程中,转换信号Q因子随泵浦光功率增大而增大,最大为82.01,光纤长度从50 m到120 m变化过程中,转换信号Q因子最大为57.41,而随着信号光与泵浦光偏振失配角的增大,转换信号Q因子逐渐降低,当失配角大于60°后,转换信号质量急剧下降。     

强激光干扰下运动目标热损伤效应的有限元研究

为对空中飞行目标实施合理有效的强激光干扰,需要综合考虑采用的干扰方式、干扰效果以及考虑光斑偏移对干扰效果的影响。以热传导理论为基础,建立了激光辐照下移动目标温度场模型,采用伽辽金法建立了有限元分析模型,采用了等效比热容的方法处理材料的相变过程;并以Ansys软件为仿真平台,对目标在高斯分布的强激光作用下的温度场和热应力进行了综合仿真分析。结果表明,光斑与目标辐照区域的相对偏移对目标表面温度影响较大,对目标纵深破坏效应相对较小,应力变化主要发生在激光辐照区域,应力最大处也会随热源的移动而变化。     

多目标跟踪中目标数量准确识别算法

由于场景中存在目标遮挡与重叠的影响,以及检测时产生的分割错误,同一个目标往往被识别为若干运动区域,或者多个目标被识别为同一个运动区域,从而导致目标数量识别错误。为了解决这一问题,提出了一种结合融合与分离操作的理论来分析视频的方法,将多目标跟踪的问题转化成为一个找寻后验极值的问题。采用图论的方法表示观测结果,利用图像序列中目标运动轨迹和外观相似度的信息,将多目标跟踪的问题归结为找寻图中多个最优路径的问题。该方法采用了滑动窗口框架以便统计固定数目帧的信息。实验结果表明该方法能够应对实际中发生的上述现象,达到了准确识别多目标数量的目的。     

自校准靶型在冲击波实验中的应用

在使用任意反射面速度干涉仪(VISAR)测量运动表面速度的过程中,利用双灵敏度方法可以获得唯一的速度。由于双灵敏度方法对速度的判断需要人为干预,所以就会出现速度的非唯一性问题。在成像型VISAR中,由于散斑和条纹质量下降等问题,该现象更加严重。提出了一种可进行自校准判断的靶型,可以在获得冲击波速度的同时获得唯一冲击波速度,从而改进了双灵敏度方法。通过积分速度曲线的面积,获得运动表面所经历的距离。比较几组相近速度曲线的积分值与已知样品的厚度,可以获得准确的冲击波速度历史曲线图。同时该方法也是一种从实验上验证VISAR系统不确定度的方法,与理论上的评估结果相互吻合,证明了该方法的正确性。这种改进的双灵敏度测速方法和不确定度评估方法,可为未来的VISAR诊断精密化发展提供技术思路。     

Bioactivity and mechanical properties of nickel‐incorporated hydrogenated carbon nanocomposite thin films

In this paper, the influence of nickel incorporation on the mechanical properties and the in vitro bioactivity of hydrogenated carbon thin films were investigated in detail. Amorphous hydrogenated carbon (a‐C:H) and nickel‐incorporated hydrogenated carbon (Ni/a‐C:H) thin films were deposited onto the Si substrates by using reactive biased target ion beam deposition technique. The films' chemical composition, surface roughness, microstructure and mechanical properties were investigated by using XPS, AFM, TEM, nanoindentation and nanoscratch test, respectively. XPS results have shown that the film surface is mainly composed of nickel, nickel oxide and nickel hydroxide, whereas at the core is nickel carbide (Ni₃C) only. The presence of Ni₃C has increased the sp² carbon content and as a result, the mechanical hardness of the film was decreased. However, Ni/a‐C:H films shows very low friction coefficient with higher scratch‐resistance behavior than that of pure a‐C:H film. In addition, in vitro bioactivity study has confirmed that it is possible to grow dense bone‐like apatite layer on Ni/a‐C:H films. Thus, the results have indicated the suitability of the films for bone‐related implant coating applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Measurements of NO2 mixing ratios with topographic target light scattering-differential optical absorption spectroscopy system and comparisons to point monitoring technique

A topographic target light scattering-differential optical absorption spectroscopy(ToTaL-DOAS) system is developed for measuring average concentrations along a known optical path and studying surface-near distributions of atmospheric trace gases.The telescope of the ToTaL-DOAS system points to targets which are located at known distances from the measurement device and illuminated by sunlight.Average concentrations with high spatial resolution can be retrieved by receiving sunlight reflected from the targets.A filed measurement of NO2 concentration is performed with the ToTaL-DOAS system in Shijiazhuang in the autumn of 2011.The measurement data are compared with concentrations measured by the point monitoring technique at the same site.The results show that the ToTaL-DOAS system is sensitive to the variation of NO2 concentrations along the optical path.     

Dynamic Deformation Behavior of a Golf Ball during Normal Impact

The normal impact between a golf ball and a rigid steel target was studied to examine ball deformation and the contact force during the impact. Using high-speed video images, the normal and tangential compression ratios of the ball were measured to analyze the ball deformation quantitatively. In addition, the inbound and rebound ball velocities, contact time, and coefficient of restitution were determined as basic parameters of the impact. As the inbound ball velocity increased, the maximum normal compression ratio increased while the maximum tangential compression ratio, contact time and coefficient of restitution decreased. The ball center displacements during the impact were measured to determine the ball center velocity and acceleration, and the contact force was calculated by the product of the mass and acceleration. The contact force increased almost linearly with the inbound ball velocity, and its relationship agreed well quantitatively with the results from a load-cell, and also agreed well qualitatively with Hertz contact theory.     

AlN靶材射频磁控溅射制备AlN薄膜及性质研究

以AlN作为靶材,使用射频磁控溅射法在Si（100）和玻璃衬底上,在纯氮气气氛条件下制备得到AlN薄膜,并研究了衬底温度对溥膜的结构,形貌和性质的影响．实验表明,衬底温度为370℃的条件下制备的AlN溥膜具有C轴择优取向,薄膜表面均匀、致密和平整,均方根粗糙度为4．83nm．随着基片温度的增加,溥膜的折射率增加,对应着薄膜从非晶态到晶态过程的演变．