Seismic Evaluation of Multi-Storey RC Frame Using Modal Pushover Analysis

The recently developed pushover analysis procedure has led a new dimension to performance-based design in structural engineering practices. With the increase in the magnitude of monotonic loading, weak links and failure modes in the multi-storey RC frames are usually formed. The force distribution and storey displacements are evaluated using static pushover analysis based on the assumption that the response is controlled by fundamental mode and no mode shift takes place. Himalayan-Nagalushai region, Indo-Gangetic plain, Western India, Kutch and Kathiawar regions are geologically unstable parts of India and some devastating earthquakes of remarkable intensity have occurred here. In view of the intensive construction activity in India, where even a medium intensity tremor can cause a calamity, the authors feel that a completely up-to-date, versatile method of aseismic analysis and design of structures are essential. A detailed dynamic analysis of a 10-storey RC frame building is therefore performed using response spectrum method based on Indian Standard Codal Provisions and base shear, storey shear and storey drifts are computed. A modal pushover analysis (MPA) is also carried out to determine the structural response of the same model for the same acceleration spectra used in the earlier case. The major focus of study is to bring out the superiority of pushover analysis method over the conventional dynamic analysis method recommended by the code. The results obtained from the numerical studies show that the response spectrum method underestimates the response of the model in comparison with modal pushover analysis. It is also seen that modal participation of higher modes contributes to better results of the response distribution along the height of the building. Also pushover curves are plotted to illustrate the displacement as a function of base shear.     

线性系统模态控制及其时滞补偿

对线性系统模态控制及其时滞补偿进行研究。模态控制分控制全部模态和控制有限模态两种情况 ,时滞补偿采用移相补偿。最后结合算例对两种控制模态下的控制效果和控制有限模态时的时滞补偿进行了数值计算和结果对比     

土-结构相互作用体系合成模态阻尼比的振动台模型试验研究

本文籍振动台模型试验。研究了SSI体系的合成模态阻尼比问题。文中首先阐明了在SSI体系直接动力分析中应采用合成模态阻尼比的观点。研究了合成模态阻尼纟的实测确定方法。并在不同工况下，通过对模型不同部位测点的传递函数，基本频率，基本合成模态阻尼比等实测数据考虑，验证了SSI体系合成模态的存在性，合成模态阻尼比与相同应变下不考虑相互作用的单纯地基土体或刚性地基结构阻尼比的差异性及其在递增动力作用下的变化规律。     

弹塑性本构积分算法

本文运用模态应力,模态应变等概念,发展了一种本构积分中点算法。在简正坐标系下得到简单的算法公式。并对算法的精度和稳定性进行了计算验证和理论分析。本文算法的精度和稳定性比通用的屈服面校正方法——切线刚度—径向拉回方法要好。该法对复杂载荷情况下的弹塑性分析有一定的价值。     

随机结构正交展开分析的Ritz动力聚缩法

针对随机结果正交展开理论计算上的弱点 ,本文在分析扩阶矩阵特性的基础上 ,于 Ritz模态向量子空间中对扩阶方程实现动力聚缩 ,大大提高了正交展开理论对实际工程问题的分析能力。分析实例表明 :即使结构参数具有很大变异性 (如δ =0 .4 )时 ,该算法依然能理想地与 Monte Carlo法模拟结果相吻合 ,计算时间则远远小于 Monte Carlo模拟法。同时 ,分析例证再一次强化了在结构动力分析中考虑结构参数随机性的必要性     

对胡海昌的小参数法的补充

专著提出了计算特征向量摄动的一种非模态展开法，本文对这一方法中参数μ或者矩阵μ如何选取的问题进行了研究，分析了μ的数学本质，并指出对于重特征值问题，μ只要是一个适当选定的标量常数既可，无需是个矩阵。     

转动盘一片系的循环对称模综

本文考察在任意恒定转速下叶片/轮盘系的固有模态分析,计及叶片预扭所引起的大变形效应.把群论算法用于子结构技术,通过联立迭代求出叶片/轮盘系在离心场中的平衡位置和应力分布,进而确定初应力刚度矩阵、大变形刚度矩阵,以及相应的动频模态.由于本方法考虑了叶片大变形的影响,且可消去子结构间的全体内连自由度。从而在确保精度的前提下,显著地压缩了计算的规模.实践证明本文提出的子结构联立迭代法有很好的收敛性,它使计算量有巨大的节省.     

光纤传感器和压电作动片对薄板振动控制的分析

利用双模模态域光纤传感器的模间干涉感知薄板结构中应变的变化、获得薄板结构振动变化状况，进一步利用压电体作为动元件，减小振幅，实现振动的主动控制，采用振型叠加法和直接积分相结合的方法，从理论上论证薄板分别受到正弦波激振力，脉冲激振力和方波激振力时的振动主动控制，并由脉冲激振下的响应得到控制前后的幅频特性曲线和相频特性曲线．。     

Bias in modal parameters using the direct and iterative RFP identification procedures

In the rational fraction polynomial method [1] the identification of modal parameters is obtained through a direct linear least-square optimization technique but a particular form of fitting error is minimized. An iterative algorithm has been recently developed which uses the true fitting error [2]. In this paper a statistical analysis is developed to estimate the bias effects on the identified parameters when the data are polluted with noise. Both the direct and iterative procedures are considered. Numerical simulations are used to validate the results predicted by the theoretical analysis, which shows that the iterative approach is by far more efficient than the direct method.A first version of this paper was presented at 17th Int. Seminar on Modal Analysis, Leuven (Belgium), 23–25 September 1992, and preprinted in the Proceedings.     

应用结构传递函数计算高阶剩余模态

本文分析了高阶剩余模态的组成形式,提出了一种利用结构传递函数求解高阶剩余模态的方法.由于文中通过传递函数得到结构高阶剩余模态,因此实验模态技术能方便地引入模态综合之中,为模态综合技术更广泛地应用提供了方便.