On Some Iterated Means Arising in Homogenization Theory

We consider iteration of arithmetic and power means and discuss methods for determining their limit. These means appear naturally in connection with some problems in homogenization theory.     

Mathematical Modelling of Cable Stayed Bridges: Existence, Uniqueness, Continuous Dependence on Data, Homogenization of Cable Systems

A model of a cable stayed bridge is proposed. This model describes the behaviour of the center span, the part between pylons, hung on one row of cable stays. The existence, the uniqueness of a solution of a time independent problem and the continuous dependence on data are proved. The existence and the uniqueness of a solution of a linearized dynamic problem are proved. A homogenizing procedure making it possible to replace cables by a continuous system is proposed. A nonlinear dynamic problem connected with the homogenizing procedure is proposed and the existence and uniqueness of a solution are proved.     

Bounds and Numerical Results for Homogenized Degenerated p-Poisson Equations

In this paper we derive upper and lower bounds on the homogenized energy density functional corresponding to degenerated p-Poisson equations. Moreover, we give some non-trivial examples where the bounds are tight and thus can be used as good approximations of the homogenized properties. We even present some cases where the bounds coincide and also compare them with some numerical results.     

Biochip fluorescence detection system with spatial and spectral separation

A novel optical arrangement for fluorescence detection that employs spatial separation as well as spectral filter to increase the signal to noise ratio is proposed. Using a prism and two mirrors, the elliptical laser beam of a laser diode, as an excitation light, is homogenized and the transmitted excitation light is separated from the fluorescence not to reach the collecting optics. Uncooled CCD can capture the fluorescence image of up to 40 fluorescently-labeled protein patterns without scanning or mechanical translation. This paper presents the simulation, construction and measurement results of the developed optical system. The measurements show that the combination of prism and mirrors converts the excitation light from the laser diode to uniform illumination on the specimen, and provides the separation between excitation and fluorescence light to give high signal to noise ratio. It is also possible to assay various protein concentrations ranging from 1000 to 10 ng/ml reliably. We believe that the proposed fluorescence detection system can be used to build a commercially valuable, low cost, hand-held or miniature fast detection device for point-of-care applications.     

THE SATELLITE STRUCTURE TOPOLOGY OPTIMIZATION BASED ON HOMOGENIZATION METHOD AND ITS SIZE SENSITIVITY ANALYSIS

With the development of satellite structure technology, more and more design parameters will affect its structural performance. It is desirable to obtain an optimal structure design with a minimum weight, including optimal configuration and sizes. The present paper aims to describe an optimization analysis for a satellite structure, including topology optimization and size optimization. Based on the homogenization method, the topology optimization is carried out for the main supporting frame of service module under given constraints and load conditions, and then the sensitivity analysis is made of 15 structural size parameters of the whole satellite and the optimal sizes are obtained. The numerical result shows that the present optimization design method is very effective.     

Optimal Control for Multiscale Elliptic Equations with Rough Coefficients

This paper concerns the convex optimal control problem governed by multiscale elliptic equations with arbitrarily rough $L^\infty$ coefficients, which has not only complex coupling between nonseparable scales and nonlinearity, but also important applications in composite materials and geophysics. We use one of the recently developed numerical homogenization techniques, the so-called Rough Polyharmonic Splines (RPS) and its generalization (GRPS) for the efficient resolution of the elliptic operator on the coarse scale. Those methods have optimal convergence rate which do not rely on the regularity of the coefficients nor the concepts of scale-separation or periodicity. As the iterative solution of the nonlinearly coupled OCP-OPT formulation for the optimal control problem requires solving the corresponding (state and co-state) multiscale elliptic equations many times with different right hand sides, numerical homogenization approach only requires one-time pre-computation on the fine scale and the following iterations can be done with computational cost proportional to coarse degrees of freedom. Numerical experiments are presented to validate the theoretical analysis.     

结构拓扑优化研究方法综述

结构拓扑优化研究方法目前有解析方法和数值方法两大类.首先介绍了解析方法中的 Michell理论,它在结构拓扑优化领域研究较早,影响最为深远.随后着重讨论了杆系和连 续体结构拓扑优化的数值方法.杆系结构常采用基结构方法,通过删除部分杆件达到结构 拓扑优化的目的.连续体结构一般要划分为有限单元,通过删除单元形成带孔的连续体, 以实现拓扑优化.介绍了连续体结构拓扑优化常采用的材料模型:各向同性、各向异性和 带微结构材料.并对连续体结构(0-1)拓扑优化中的数值计算不稳定问题的机理进行了分 析,给出了解决方法.此外,对应力约束问题存在解的奇异性现象也作了简要介绍.最后, 对数值方法中的主要数学求解方法进行了简单介绍.     

用均匀化理论分析蜂窝结构的等效弹性参数

在线弹性范围内,根据均匀化理论,并结合有限元方法推导出适用于二维周期性结构的均匀化的有限元格式（Homo FEM）,计算出不同相对密度下的规则蜂窝结构的等效弹性模量Ee和泊松比νe.同时,利用蜂窝结构的代表胞元模型,用常规的有限元方法（FEM）模拟计算出相应的等效弹性参数.最后将两种数值计算结果与己有的理论公式进行了比较和分析讨论.结果表明:在考察的相对密度全场范围内（0～0.4）,HOmO FEM得到的蜂窝结构的 Ee和νe 与 FEM使用平面实体单元模拟计算得到的结果一致吻合,反映出 Homo FEM数值方法的客观准确性和可行性.而 Gibson公式和 W-K得到的等效弹性模量值 Ee只是在较小相对密度的情况下（小于0.15）与数值计算结果吻合.当结构的相对密度较大时,必须考虑胞棱附近区域由应力集中导致的复杂的应力和应变分布的影响.     

松质骨弹性模量计算的均匀化方法

对松质骨建立了六种单胞微观结构模型，采用均匀化方法和有限元方法计算松质骨的宏观等效弹性模量。给出了六种单胞模型的松质骨弹性模量与材料密度(体分比）的关系，与实验数据进行了对比，分析了不同微观结构模型在不同骨骼中的应用。结果表明，本文方法及六种单胞模型可以对松质骨微观结构和材料性能进行有效的模拟计算。同时本文又着重对松质骨的宏观等效弹性模量与体分比的指数关系进行了探讨。     

含有序孔洞的多孔氧化铝薄膜的力学性能测量和数值模拟

高纯铝箔在特定的溶液下经过电化学阳极氧化腐蚀,可在其表面生成一层多孔的非晶氧化铝层,其孔径分布非常均匀,孔大致呈六方密排布。由于此类薄膜具有规则的纳米级孔径,大的比表面积,良好的自组织排列性,所以其日益受到人们的关注。然而,到目前为止,对于此类薄膜力学性能的研究还很少,所以在一定程度上限制其功能的开发和应用。为了获得此类多孔膜的弹性常数,本文首先由实验出发,通过光力学检测(双光束散斑干涉)的方法得到薄膜拉伸时的整体表观弹性模量。然后对薄膜建立二维有限元模型,运用均匀化理论反推出其基体(无孔结构)的弹性模量,同时考察了不同的基体泊松比对模型整体表观模量的影响,并且用一般有限元方法验证了沿特定方向拉伸时均匀化模型计算的有效性。