Model prediction of batch emulsion copolymerization as a function of conversion: A sensitivity analysis

Recently a model has been developed capable of predicting absolute monomer concentrations and their ratios in the polymer, aqueous, and monomer droplet phases as a function of conversion in batch emulsion copolymerizations without using any adjustable parameters. In this article the sensitivity of model predictions of composition drift toward deviations of 10% in all model parameters (maximum swellabilities of monomer in the polymer phase, water solubilities, reactivity ratios, and monomer and polymer densities) was estimated using the monomer combination methyl methacrylate-styrene as an example. From the sensitivity analysis it can be concluded that the reactivity ratios are the most important parameters affecting composition drift. The effects of deviations in maximum swellabilities and monomer and polymer densities on composition drift can be neglected, while the water solubility is important only in those cases where the amount of monomer in the aqueous phase cannot be neglected as compared with the total monomer amount. © 1994 John Wiley & Sons, Inc.     

Glucose utilization by lysine-producing fluoroacetate-sensitive mutants ofCorynebacterium glutamicum

A fluoroacetate-sensitive mutant was isolated fromCorynebacterium glutamicum, ATCC 21513, following mutagenesis with NTG. Batch fermentations show that in terms of growth kinetics, glucose utilization, and lysine formation, there are significant differences between the mutant and the parent. The mutant’s specific growth rate (0.22/h) is lower than that for the parent (0.34/h). Also, the yield expressed as lysine/glucose consumed does not alter as a function of the glucose concentration for the mutant, and is about 0.22, whereas for the parent, this coefficient decreases with increasing glucose concentration. The maximum specific rate of lysine production for the mutant is 1.3 g/L/h that is about two-fold higher than that for the parent.     

XPS定量分析及其在CdTe（Ⅲ）面识别化学物种中的应用

我们用谱仪能量传输函数修正的相对原子灵敏度因子获得了ＸＰＳ定量数据。通过将定量结果与结合能的化学位移相结合的方法，分析了ＣｄＴｅ表面的两个氧化过程，结果表明，机械抛光样品表面的构成是：６６％ＣｄＴｅ，２８．９％的Ｃｄ（ＯＨ）２和５．１％ＴｅＯｘ（Ｘ＞２），而经化学抛光的表面构成是∶８４．４％的ＴｄＴｅＯ４和１５．６％ＴｅＯｘ（Ｘ＞１）。     

Hexacyanoferrate‐based ionic liquids as Fenton‐like catalysts for deep oxidative desulfurization of fuels

Two hexacyanoferrate‐based ionic liquids, [C₄Py]₃Fe(CN)₆ and [C₁₆Py]₃Fe(CN)₆, were synthesized and characterized using Fourier transform infrared and mass spectroscopies and CHN analysis. They were employed as Fenton‐like catalysts in extraction and catalytic oxidative desulfurization of model oil with dibenzothiophene (DBT), benzothiophene (BT), 4,6‐dimethyldibenzothiophene (4,6‐DMDBT), 4‐methyldibenzothiophene (4‐MDBT) and 3‐methylbenzothiophene (3‐MBT) as substrates. Various polar solvents, such as ionic liquids, water and organic solvents, were applied to choose a suitable extractant. The results showed the removal of DBT reached 97.1% with [C₄Py]₃Fe(CN)₆ as a catalyst and 1‐n‐octyl‐3‐methylimidazolium hexafluorophosphate ([C₈mim]PF₆) as an extractant under optimal conditions. The activity of sulfur removal followed the order DBT > 3‐MBT > BT > 4‐MDBT >4,6‐DMDBT. The effect of water content on sulfur removal was investigated by adding various concentrations of H₂O₂. It was found that excess water had a positive effect on sulfur removal but the catalysts were less sensitive than [FeCl₄^?]‐based catalysts to water. The mechanism was studied using electron spin‐resonance spectroscopy and gas chromatography–mass spectrometry. O₂^?? may be the active oxygen species in the catalytic oxidative desulfurization process and the oxidation products of various sulfur compounds were the corresponding sulfoxides and sulfones. Copyright © 2016 John Wiley & Sons, Ltd.     

Three‐dimensional wave impact on a rigid structure using smoothed particle hydrodynamics

Navier–Stokes computations of a wave–structure interaction are performed with the aim of assessing the potential of smoothed particle hydrodynamics to accurately estimate impact loading time history. A three‐dimensional dam‐break flow with a rectangular column located downstream is considered. The net force and impulse exerted on the column is monitored throughout the simulation with the results correlating well with existing experimental data. Initial and boundary conditions and numerical parameters are varied and their effect on the column load investigated. The column load is found to be most sensitive to the choice of boundary treatment. Copyright © 2011 John Wiley & Sons, Ltd.     

Magneto-optical visualization of three spatial components of inhomogeneous stray fields

The article deals with the physical principles of magneto-optical visualization (MO) of three spatial components of inhomogeneous stray fields with the help of FeCo metal indicator films in the longitudinal Kerr effect geometry. The inhomogeneous field is created by permanent magnets. Both p- and s-polarization light is used for obtaining MO images with their subsequent summing, subtracting and digitizing. As a result, the MO images and corresponding intensity coordinate dependences reflecting the distributions of the horizontal and vertical magnetization components in pure form have been obtained. Modeling of both the magnetization distribution in the indicator film and the corresponding MO images shows that corresponding to polar sensitivity the intensity is proportional to the normal field component, which permits normal field component mapping. Corresponding to longitudinal sensitivity, the intensity of the MO images reflects the angular distribution of the planar field component. MO images have singular points in which the planar component is zero and their movement under an externally homogeneous planar field permits obtaining of additional information on the two planar components of the field under study. The intensity distribution character in the vicinity of sources and sinks (singular points) remains the same under different orientations of the light incidence plane. The change of incident plane orientation by π/2 alters the distribution pattern in the vicinity of the saddle points.     

Octapeptide-Specific and Sensitive Assay for Angiotensin II in Plasma

Abstract

Angiotensin-(1–8)octapeptide (angiotensin II) is the active principle of the reninangiotensin system. Crossreaction of angiotensin II-antisera with inactive precursors and metabolic fragments prevented the specific quantitation of this hormone in biological fluids. Peptide-extraction on bonded-phase silica followed by peptide-separation using isocratic reverse-phase high performance liquid chromatography and subsequent radioimmunoassay rendered possible the octapeptide-specific measurement of angiotensin II in 2 ml plasma with a detection limit of 0.4fmol/ml. The coefficient of variation for intra-assay precision was 0.06 and for inter-assay precision 0.13. ¹²⁵Iangiotensin II was recovered from plasma by solid-phase extraction to 99±2% (mean ± S.D.). The overall recovery of 5, 10 and 20 fmol unlabeled angiotensin II added to plasma was 80±10%. Plasma concentrations in supine normal humans averaged 4.1 ± 1.6 fmol/ml and were suppressed below the detection limit by angiotensin I converting enzyme inhibition.     

An ALE finite element method for a coupled Stefan problem and Navier–Stokes equations with free capillary surface

In this article, an ALE finite element method to simulate the partial melting of a workpiece of metal is presented. The model includes the heat transport in both the solid and liquid part, fluid flow in the liquid phase by the Navier–Stokes equations, tracking of the melt interface solid/liquid by the Stefan condition, treatment of the capillary boundary accounting for surface tension effects and a radiative boundary condition. We show that an accurate treatment of the moving boundaries is crucial to resolve their respective influences on the flow field and thus on the overall energy transport correctly. This is achieved by a mesh‐moving method, which explicitly tracks the phase boundary and makes it possible to use a sharp interface model without singularities in the boundary conditions at the triple junction. A numerical example describing the welding of a thin‐steel wire end by a laser, where all aforementioned effects have to be taken into account, proves the effectiveness of the approach.Copyright © 2012 John Wiley & Sons, Ltd.     

环路跟踪卡尔曼滤波算法的性能分析

基于卡尔曼滤波的环路跟踪算法多是通过一定仿真证明算法性能,没有系统性性能评估,难以较好指导工程应用。在原有算法基础上进行了优化,并系统性地对比分析、评估了基于卡尔曼环路滤波算法性能,以期为算法工程化提供指导。首先提出对跟踪环路反馈调整量进行预测,使之更符合系统实际,减小环路跟踪误差。而后基于卫星信号模拟器输出信号和自生产信号源,充分评估基于卡尔曼滤波环路跟踪算法的收敛时间和灵敏度。仿真结果表明,相比目前工程常用的二阶FFL辅助三阶PLL算法,基于卡尔曼滤波环路跟踪算法能够缩短环路所需稳定时间约90%,并能提升跟踪灵敏度约5 d B,有效改善弱信号场景中接收机输出信息的完好性和连续性。     

IMPORTANCE MEASURE OF CORRELATED VARIABLES IN POLYNOMIAL OUTPUT

为了解决一般工程问题中输出量为多项式情况下相关正态输入变量的贡献识别问题，以二次不含交叉项的多项输出量为例，利用多维相关正态分布及其条件分布的性质，解析地推导了相关正态输入变量对输出量总方差的独立贡献及相关贡献，采用算例验证了所推导的解析表达式的正确性．文中所推导的相关正态变量独立贡献和相关贡献的表达式可直接用于输出量为二次不含交叉项多项式或一次多项式情况下的输入变量贡献的识别，并且为其他新的算法提供了对照解，另外此方法亦可以推广至含交叉项的高阶多项式，解决更为复杂输出量情况下输入量的贡献识别问题．