水相湿法改性纳米碳酸钙表面性质的研究

用特定的表面改性剂在水相中对纳米碳酸钙的悬浮液进行了湿法改性。红外光谱和热失重分析证明,改性剂与碳酸钙之间以化学键结合;沉降体积和接触角的测定结果说明改性粒子在液体石蜡中的润湿性和疏水性得到了提高;透射电子显微镜照片显示改性粒子在液体石蜡中有更好的分散性;体系粘度实验表明改性粒子与液体石蜡之间有较好的相容性。     

含吩噻嗪金属配合物的合成及非线性光学性质研究

本文报道了一种新的配体:10-乙基-3-甲酰吩噻嗪缩肼基二硫代甲酸甲酯(HL)及其金属配合物的合成。采用了元素分析、质谱、核磁共振、红外光谱对配体及其金属配合物进行了表征。此外,并应用紫外、荧光和Z-扫描技术,测定了配体及其金属配合物的荧光最佳发射波长(λ_max^em)、荧光量子产率(Φ_f)、寿命(τ)和非线性光学性质。结果表明它们在DMF溶液中都能发射出较强的橄榄色荧光,配体及其金属配合物都有双光子吸收,并且金属配合物的非线性光学效应比配体明显增强。用半经验量子化学方法(RHF/PM3)计算结果与实验值较为吻合。     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.     

机械球磨与反应烧结合成Sr2CeO4发光体的研究

Sr₂CeO₄ phosphor was synthesized by mechanical milling and reactive sintering in this work. The solid state reaction of SrCO₃and CeO₂ (2∶1) started at about 850 ℃ and completed at 1 000 ℃ for about 4 h. Two types of formation mechanism of Sr₂CeO₄ were proposed. When the starting powder mixture was fired above 1 000 ℃, the unstable intermediate phase SrCeO₃was developed, which then reacted with SrCO₃to form the final product Sr₂CeO₄, however, SrCO₃and CeO₂ converted directly to Sr₂CeO₄ at a lower temperature. The XRD results showed the crystal structure of Sr₂CeO₄ was orthorhombic. The emission spectra displayed a broad band with maximum at about 465 nm. The mechanical milling of starting power mixture and the sintering temperature had no effect on this emission spectra.     

拓扑指数法研究显色剂结构与反应性能关系

本文讨论了２９个不对称色酸双偶氮膦酸型显色剂的分子联接性指数，并将其与结构选择性因子相结合，用于偶氮类剂结构与铈显色反应灵敏度的相关性研究，讨论了显色剂结构对显色反应灵敏度的影响。     

新铌酸盐Ba5NdTi3Nb7O30的合成与介电性能

The New Niobate Ba₅NdTi₃Nb₇O₃₀ was synthesized by solid state reaction at 1250℃ for 48h. The crystal structure and dielectric properties of Ba₅NdTi₃Nb₇O₃₀ were determined by X-ray powder diffraction and dielectric measurements. The results show that Ba₅NdTi₃Nb₇O₃₀ belongs to ferroelectric phase of tetragonal tungsten bronze structure at room temperature with unit cell parameters: a=1.24424(4)nm, c=0.39476(2)nm, calculated density 5.719g·cm^-3. Ba₅NdTi₃Nb₇O₃₀ belongs to relaxor ferroelectrics. The phase transition temperature (T_c) of Ba₅NdTi₃Nb₇O₃₀ from ferroelectric to paraelectric is found to shift toward higher temperature side at higher fre-quency, and T_c is 90℃ at 1kHz. At room temperature, the dielectric constant (ε_r) and dielectric loss of Ba₅NdTi₃Nb₇O₃₀ decrease with the increase of frequency, and Ba₅NdTi₃Nb₇O₃₀ ceramic have high dielectric constant 489 at 1kHz.     

雷尼镍催化剂的吸附量热研究

雷尼镍催化剂的吸附量热研究王益沈俭一（南京大学化学系，南京２１００９３）ＨａｎｓＷａｒｌｉｍｏｎｔ（ＩｎｓｔｉｔｕｔｅｆｏｒＳｏｌｉｄＳｔａｔｅａｎｄＭａｔｅｒｉａｌｓＲｅｓｅａｒｃｈ，ＤｒｅｓｄｅｎＤ０１０６９，Ｇｅｒｍａｎｙ）关键词雷尼镍...     

SA耐火材料多晶结构与性能的研究

本实验采用磨具废砂和炉皮SiC废砂生产SA耐火材料，通过XRD分析和计算机处理确定各试样中的晶相（4H－SiC，33R－SiC，3C－SiC，α－Al2O3，β-石英和Al6Si2O13）及其各相的含量。通过材料性能与结构综合分析，确定较好的配方，其含量：磨具废砂50％，炉皮砂45％，结合剂5％，外加矿化剂2％。     

Networks and chain coverings in partial orders and their products

For an arbitrary poset P, subposets {P _i : 1ik} form a transitive basis of P if P is the transitive closure of their union. Let u be the minimum size of a covering of P by chains within posets of the basis, s the maximum size of a family of elements with no pair comparable in any basis poset, and a the maximum size of an antichain in P. Define a dense covering to be a collection D of chains within basis posets such that each element belongs to a chain in D within each basis poset and is the top of at least k-1 chains and the bottom of at least k-1 chains in D. Dense coverings generalize ordinary chain coverings of poset. Let d=min {|D|–(k–1)|P|}. For an arbitrary poset and transitive basis, a convenient network model for dense coverings yields the following: Theorem 1: da, with equality iff P has a minimum chain decomposition in which every pair of consecutive elements on each chain are comparable in some basis poset. Theorem 2: usda. Theorem 3: s=d iff s=a. The most interesting special case is where the transitive basis expresses P as the product of two posets, in which case u and s measure the minimum and maximum sizes of unichain coverings and semiantichains.     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.