Optimization of auxiliary basis sets for the LEDO expansion and a projection technique for LEDO-DFT

We present a systematic procedure for the optimization of the expansion basis for the limited expansion of diatomic overlap density functional theory (LEDO-DFT) and report on optimized auxiliary orbitals for the Ahlrichs split valence plus polarization basis set (SVP) for the elements H, Li--F, and Na--Cl. A new method to deal with near-linear dependences in the LEDO expansion basis is introduced, which greatly reduces the computational effort of LEDO-DFT calculations. Numerical results for a test set of small molecules demonstrate the accuracy of electronic energies, structural parameters, dipole moments, and harmonic frequencies. For larger molecular systems the numerical errors introduced by the LEDO approximation can lead to an uncontrollable behavior of the self-consistent field (SCF) process. A projection technique suggested by L?wdin is presented in the framework of LEDO-DFT, which guarantees for SCF convergence. Numerical results on some critical test molecules suggest the general applicability of the auxiliary orbitals presented in combination with this projection technique. Timing results indicate that LEDO-DFT is competitive with conventional density fitting methods.     

Pulsed field gradient NMR on polybutylcyanoacrylate nanocapsules

The applicability of pulsed field gradient nuclear magnetic resonance spectroscopy to nanocapsule systems is demonstrated on dispersed poly-n-butylcyanoacrylate nanocapsules as a model system. Spectroscopic data are presented that allow for the structural characterization of the inner cavities, the observation of Brownian motion of the capsules and the detection of rapid molecular exchange through the capsule walls. An analytical formula is proposed that yields equilibrium populations and average residence times of a given tracer molecule, thus leading to crucial information regarding the permeability of the capsule walls. Based on these analytical methods, two varieties of nanocapsules are compared that derive from two different preparation procedures. It is found that thinner capsule walls obtained under acidic conditions of the organic phase during interfacial polymerization lead to correspondingly higher exchange rates of benzene as a tracer molecule.     

Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

Fouling and protein adsorption effect of low-temperature plasma treatment of membrane surfaces

Adsorption of proteins and the effect of the chemical nature of membrane surfaces on protein adsorption were investigated using¹⁴C-tagged albumin and several microporous membranes (polyvinilydene fluoride, PVDF; nylon; polypropylene, PP; and polycarbonate, PC). The membrane surfaces were modified by exposing them to low-temperature plasma of several different monomers (n-butane, oxygen, nitrogen alone or as mixtures) in a radiofrequency plasma reactor. Transients in the permeability of albumin solutions through the membranes and changes in flux of distilled water through the membranes before and after adsorption of albumin were used to investigate the role of protein adsorption on membrane fouling. The results show that the extent of adsorption of albumin on hydrophobic membranes was considerably more than that on hydrophilic membranes. The hydrophilic membranes were susceptible to electrostatic interactions and less prone to fouling. A pore-blocking model was successfully used to correlate the loss of water flux through pores of defined geometry     

Acetylation and molecular mass effects on barrier and mechanical properties of shortfin squid chitosan membranes

Chitosan samples with different N-deacetylation levels were obtained from β-chitin under heterogeneous alkali conditions. Oxidative depolymerisation was performed to attain low-acetylated chitosan samples with different molecular mass. Water vapour permeability, membrane swelling and tensile mechanical properties were analysed in plasticized self-supporting chitosan membranes. The main purpose was to describe unambigously the effect of the biopolymer molecular mass and acetylation degree on these properties. Commercially available chitosan samples derived from α-chitin were also studied for comparison. The equilibrium degree of swelling in water and the water vapour permeability increase by increasing the molecular mass or the degree of acetylation. Regarding the effect on the mechanical properties, generally harder and tougher membranes were obtained for chitosans with higher molecular mass or lower acetylation degree. These observations are tentatively explained based on the different structural characteristics of the polymer and can lead to a better understanding of the tools necessary to tailor a specific type of chitosan membrane.     

Synthesis and properties of a poly(diphenylacetylene) containing carbazolyl groups

1-(p-N-Carbazolylphenyl)-2-phenylacetylene (p-CzDPA) was polymerized by TaCl₅–co-catalyst systems (cocatalysts: n-Bu₁Sn, Et₃SiH, and 9BBN) to produce acetone-insoluble polymers in about 60-70% yields. Poly(p-CzDPA) was a yellowish-orange solid, most part of which was soluble in toluene, chloroform, etc., and its weight-average molecular weights were around 4×10⁵. This polymer formed a tough film by solution casting, and was thermally very stable (the onset temperature of weight loss in TGA in air 470°C). The oxygen per-meability coefficient of the polymer at 25°C was lower than two barrers. The present polymer showed photoconductivity and redox activity. © 1995 John Wiley & Sons, Inc.     

Use of intermittent jets to enhance flux in crossflow filtration

This paper deals with the influence of a new flow unsteadiness on the permeate fluxes in crossflow filtration. A pneumatically controlled valve generates intermittent jets from the main flow, causing the formation of large vortices moving downstream along the tubular membrane. The main results of the numerical calculation of such flows are given. The experimental study was carried out by filtering a bentonite suspension through an ultrafiltration mineral membrane. Time evolutions of flux were achieved in steady and unsteady operating conditions. Results concerning the influence and limits of the nozzle to tube diameter ratio and the jet velocities are discussed. The applicability of such an unsteady flow is examined with a view to effects on energy consumption and possible viscosity effects.     

溴代及胺交联聚苯醚（PPO）膜的气体透过行为

对聚苯醚(PPO)进行了苯环溴代、甲基溴代以及胺交联,发现苯环溴代可提高O_2、N_2透过率(P),而选择性(α)基本不变。甲基溴代则相反,P降低、α有明显提高。调节两者比例可得到P、α兼优的O_2、N_2分离膜。甲基溴代后进一步胺交联可得到α更高、耐溶剂的膜材料。     

高分子气体分离膜材料的化学结构与气体透过性能之间的关系

本文以硅橡胶和聚酰亚胺为基础,从高分子的化学组成、分子链段的运动能力、侧基的大小及其作用等几个方面,讨论了聚合物的化学结构对其均质膜的气体选择透过性能的影响,以溶解扩散过程对气体分离膜材料的透气行为进行了剖析,井简述高分子化学结构对其成膜时结晶情况的影响及对气体透过的作用;还概述了气体分离膜科学发展的历史以及基本原理.     

高分子-AlCuCl4膜及其气体透过行为探讨

把对一氧化碳具有选择吸附功能的液体吸附剂(AlCuCl_4-甲苯溶液和AlCuCl_4-Pst-甲苯溶液)引入到高分子(EC、Pst、ABS、CA)膜材料中,制成固体膜,考察了膜的气体透过性能,同时初步得出结果认为,膜中的AlCuCl_4以电荷转移配合物形式与高分子配位结合.