HEAT TRANSFER AND PRESSURE DROP FROM LOUVERED SURFACES IN AUTOMOTIVE HEAT EXCHANGERS

An investigation of heat transfer and pressure drop from some louvered surfaces is presented. The test rig and the measuring as well as the data evaluating procedures are described. The measured data are transferred and presented in a nondimenswnal form. The heal transfer data are provided mainly as Stanton numbers versus Reynolds number, and the pressure drop is given as Darcy friction factors versus Reynolds number. For comparing the performance of the various louvered surfaces, the flow area goodness factors and the so-called volume goodness factors are presented. All the louvered surfaces have been found to be more efficient than the corresponding smooth surface. The standard multilouvered fin surfaces were found to be most efficient, but one of the new surfaces also performed very well.     

COUPLING EFFECTS OF VOID SHAPE AND VOID SIZE ON THE GROWTH OF AN ELLIPTIC VOID IN A FIBER-REINFORCED HYPER-ELASTIC THIN PLATE

The growth of a prolate or oblate elliptic micro-void in a fiber reinforced anisotropic incompressible hyper-elastic rectangular thin plate subjected to uniaxial extensions is studied within the framework of finite elasticity. Coupling effects of void shape and void size on the growth of the void are paid special attention to. The deformation function of the plate with an isolated elliptic void is given, which is expressed by two parameters to solve the differential equation. The solution is approximately obtained from the minimum potential energy principle. Deformation curves for the void with a wide range of void aspect ratios and the stress distributions on the surface of the void have been obtained by numerical computation. The growth behavior of the void and the characteristics of stress distributions on the surface of the void are captured. The combined effects of void size and void shape on the growth of the void in the thin plate are discussed. The maximum stresses for the void with different sizes and different void aspect ratios are compared.     

3D finite element simulation of explosive welding of three-layer plates

A 3D finite element model of the explosive welding process of three-layer plates with materials of steel-copper-copper is established. Based on the presented model, the bonding mechanism is simulated and analyzed, different detonation modes are also comparatively studied to indicate the driving force spread in few microseconds. The results show that the three layer plates bond together after many times of impact between the flyers and the base driven by detonation wave, which is damping rapidly at each impa...     

Designing liquid-crystalline dendronised hexa-adducts of [60]fullerene via click chemistry

ABSTRACT

Liquid-crystalline [60]fullerodendrimers were constructed via click chemistry based on the reaction between hexa-adducts of [60]fullerene (C₆₀) bearing 12 azide groups and alkyne-terminated cyanobiphenyl dendrons of first- and second-generation. The structure of all the new compounds was confirmed by IR, UV, ¹H and ¹³C NMR spectroscopies and mass spectrometry. The mesomorphic properties were studied by polarised optical microscopy, differential scanning calorimetry and small-angle X-ray scattering. The hexa-adduct of C₆₀ functionalised with the first-generation dendrons gave rise to the formation of a smectic A phase and a rectangular columnar phase (c2mm symmetry) while the hexa-adduct of C₆₀ decorated with the second-generation dendrons displayed only a rectangular columnar phase (c2mm symmetry). Our results show that the hexa-adduct of C₆₀ is a unique synthetic platform for the design of fullerodendrimers and dendronised materials.     

SPH方法研究空气在平板入水中的影响

飞机水上迫降以及船体在高速行驶时,均会发生结构物砰击水面的现象,当结构物底面较为平坦,砰击水面时会捕获空气,在板底形成空气垫。研究空气垫的形成及影响,有助于对结构物进行更准确的载荷分析。该问题的研究涉及到气固液三相的相互作用,在数值模拟中仍是一个挑战,本文使用光滑粒子流体动力学(SPH)方法对该问题进行模拟。首先,与实验结果进行对比;其次,系统地研究了平板形成空气垫以及砰击水面的过程,考查了空气、水和平板的动能变化。对比了在SPH模拟中考虑空气与不考虑空气得到的水压力场和平板所受压力,说明了空气对结果的影响;最后,研究了平板宽度对空气垫形成的影响,从而进一步影响加速度。     

The sloshing of stratified liquid in a two-dimensional rectangular tank

The sloshing of inviscid liquid of stratified density in a rectangular tank is analyzed.As the flow is no longer irrotional,the governing equation is found to be quite different from the Laplace equation used for the liquid of constant density.In particular it contains terms of mixed temporal and spatial derivatives.The problem is solved based on the variable separation method and Laplace transform for the constant Vaisala-Brunt frequency.It is found that the stratification of density may have small effects...     

Natural convection heat transfer at reduced pressures

This paper experimentally studies the natural convection heat transfer characteristics on horizontal and vertical plates at pressures lower than atmospheric value. Eight different pressures ranging from 10Pa to 101.325kPa, and three heating loads were used in the experiments. It is found that natural convection heat transfer characteristics at reduced pressures are independent of the plate arrangements and present different behaviors in two pressure ranges, 10Pa < p < 1000Pa and p > 1000Pa. The experimental heat transfer results are correlated into a non-dimensional equation to help the thermal design of stratosphere aircrafts and airborne equipment.     

薄板弯曲分析的节点积分高阶无网格法

采用高阶无网格法求解薄板弯曲问题，在已发展的线性曲率光顺方案的基础上，通过引入泰勒展开技术，建立了能够精确再现纯弯曲和线性弯曲模式的节点积分方法。与之相比，目前无网格薄板分析主要采用的节点积分方法仅能精确再现纯弯曲模式。数值结果表明，本文方法可精确通过纯弯曲和线性弯曲试验，且能得到光滑、无振荡的弯矩场。与标准的高斯积分方法和目前已存在的节点积分方法相比，本文方法在计算精度、效率以及弯矩分布等方面均展现出显著优势。     

板结构计算模型的新发展

现代复合材料层合板具有高强和轻型的突出优点，从而在军工和民用等诸多领域发挥着重要作用。这种板结构的特点是随着纤维走向的不同，层间材料的物理-力学特性发生剧烈变化。沿板厚方向变形的梯度比较陡峭，并在层间结合面处发生强不连续，呈现zig-zag （锯齿状）现象。这导致横向剪应变在板的静态和动态响应中发生重要作用，不计横向变形的经典组合板计算模型CLPT难以适应现代多层板计算分析的需要。考虑横向剪切变形影响的板的计算模型得到重视和发展。需要指出，现有各种考虑剪切变形影响的计算模型虽然有了很大的发展，但在全面和准确性上仍然存在一定的不足，难以适应现代多层组合板横向力和物理性能多变的情况。模型预测的沿板厚方向位移和应力的变化规律难以通过严格的检验。本文提出的以比例边界有限元为基础的正交各向异性板的数值计算模型，同时可适用于各种薄板与厚板的分析，对现代复合材料层合板的分析具有特殊的优越性。所得到的板的位移、正应力和剪应力沿板厚方向的变化，与三维弹性理论的标准解高度吻合。数值算例进一步表明，随着层间纤维走向的变化，板内位移场和应力场沿板厚方向剧烈变化所呈现的锯齿现象均可以精准地进行模拟。据此，本文建议方法对现代板分析的广泛适应性和高度准确性得到了充分论证。     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.