Hydrothermal synthesis, structure, Raman spectroscopy, and self-irradiation studies of Cm(IO3)3

The study of curium iodate, Cm(IO₃)₃, was undertaken as part of a systematic investigation of the 4f- and 5f-elements’ iodates. The reaction of ²⁴⁸CmCl₃ with aqueous H₅IO₆ under mild hydrothermal conditions results in the reduction of IO₆⁵⁻ to IO₃⁻ anions, and the subsequent formation of Cm(IO₃)₃ single crystals. Crystallographic data are: (193 K, MoKα, ): monoclinic, space group P2₁/c, , , , β=100.142(2)°, V=811.76(14), Z=4, R(F)=2.11%, for 119 parameters with 1917 reflections with I>2σ(I). The structure consists of Cm³⁺ cations bound by iodate anions to form [Cm(IO₃)₈] units, where the local coordination environment around the curium centers can be described as a distorted dodecahedron. There are three crystallographically unique iodate anions within the structure; two iodates bridge between three Cm centers, and one iodate bridges between two Cm centers and has a terminal oxygen atom. The bridging of the curium centers by the iodate anions creates a three-dimensional structure. Three strong Raman bands with comparable intensities were observed at 846, 804, and 760 cm⁻¹ and correspond to the I-O symmetric stretching of the three crystallographically distinct iodate ions. The Raman profile suggests a lack of inter-ionic vibrational coupling of the I-O stretching, while intra-ionic coupling provides symmetric and asymmetric components that correspond to each iodate site. Repeated collection of X-ray diffraction data for a crystal of Cm(IO₃)₃ over a period of time revealed a gradual expansion of the unit cell from self-irradiation. After 71 days, the new parameters were: , , , β=100.021(2)°, V=818.3(2).     

Electrical interaction between two cylinders with an ion-penetrable charged membrane in an oil/water interface

The electrical interaction between two long, parallel cylinders each is covered by an ion-penetrable charged membrane immersed in an oil/water interface is investigated. The effects of contact angle, radius of cylinder, and membrane thickness on the electrical interaction force are examined. The results of numerical simulation reveal that the following conditions lead to a greater electrical interaction force: (i) a larger contact angle, i.e. a larger fraction of a cylinder in the oil phase; (ii) a larger cylinder radius; and (iii) a thinner membrane. For a fixed ionic strength, the electrical interaction force is insensible to the type of electrolytes in the water phase, in general. However, if two cylinders are close enough, then the higher the valence of counterions the greater the electrical interaction force.     

Impact of micelles on the biocidal efficiency in a diesel–water interface

Biodegradation occurs in the diesel/water interface in petroleum product pipelines. The microbial contamination can result in inhibitor/fuel degradation, leading to unacceptable levels of turbidity, filter plugging, storage tank corrosion and stored product souring. Therefore, selection of the biocide/inhibitor plays an important role in the transportation of petroleum products through pipelines. Three biocides (cationic and nonionic) were employed to study the biodegradation in a diesel‐water interface. The biocidal efficiency against degradation of diesel was examined by employing Fourier‐transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and gas chromatography mass spectrometry (GC‐MS) techniques. Bronopol (2‐bromo‐2‐nitro‐propane‐1, 3‐diol) was found to have higher bactericidal efficiency than N‐cetyl‐N,N, N‐trimethyl ammonium bromide (CTAB) and cetyl pyridinum bromide (CPB). But the cationic biocides (CTAB and CPB) showed good biocidal efficiency at the interface. The data are explained in terms of a model that postulates the formation of a ‘micelle’ at the diesel‐water interface. Copyright © 2007 John Wiley & Sons, Ltd.     

All-glass open-split interface for capillary GC/MS

This paper describes a design for an all-glass GC/MS interface. The design has advantages due to low dead volume, lack of column effluent adsorption and degradation, simple interface production and installation, and ease of column mounting/dismounting.     

UV spectra and excitation delocalization in DNA: influence of the spectral width.

The singlet excited states of the model DNA duplex (dA)10.(dT)10 are studied. Calculations are performed in the exciton theory framework. Molecular dynamics calculations provide the duplex geometry. The dipolar coupling is determined using atomic transition charges. The monomer transition energies are simulated by Gaussian functions resembling the absorption bands of nucleosides in aqueous solutions. Most of the excited states are found to be delocalized over at least two bases and result from the mixing of different monomer states. Their properties are only weakly affected by conformational changes of the double helix. On average, the highest oscillator strength is carried by the upper eigenstates. The duplex absorption spectra are shifted a few nanometers to higher energies with respect to the spectra of noninteracting monomers. The states with larger spatial extent are located close to the maximum of the absorption spectrum.     

The Electrochemistry of Tetraphenyl Porphyrin Iron(III) Within Immobilized Droplets Supported on Platinum Electrodes

For the first time, the voltammetry of an ensemble of immobilized benzonitrile microdroplets containing 5,10,15,20‐tetraphenyl‐21H,23H‐porphine iron (III) chloride, TPPFeCl immobilized at platinum electrodes immersed in various aqueous electrolytes has been explored. The reduction of TPPFeCl was observed with the voltammetric response seen to be highly dependent on the nature of ions in the surrounding aqueous phase. Unlike voltammetry in purely homogeneous solution the nature of the aqueous electrolyte can influence the voltammetry in the droplet phase. The electrochemical reduction of TPPFeCl contained within tetrabutylammonium chloride (TBACl) supported benzonitrile (PhCN) microdroplets immersed into an aqueous solution of TBACl was first studied. During TPPFeCl reduction the resulting [TPPFeCl]^? species is stabilized due to the excess of chloride anions inside the oil droplet. Voltammograms of homogeneous solutions of PhCN supported with TBACl show similar chemically reversible process which is also attributed to the stable [TPPFeCl]^? species. This anion stabilization was not observed when the oil droplets were supported with tetrabutylammonium perchlorate (TBAP) or when the PhCN solution bathing the microdroplet ensemble was supported with TBAP resulting in a chemically irreversible process. The voltammetry of unsupported droplets immobilized on a platinum electrode immersed in different aqueous electrolytes was also explored and the fate of the [TPPFeCl]^? species formed considered during the reduction sweep. Similarities and difference to voltammetry in purely homogeneous media are noted and the use of droplet voltammetry provides complimentary information.     

Effects of amino acids on crystal growth of CaC2O4 in reverse microemulsion

Crystal growth of calcium oxalate (CaC2O4) in bulk aqueous solution, reverse microemulsion of p-octyl polyethylene glycol phenylether (OP)/iso-octyl alcohol (IOA)/cydohexane/water and above microemulsions containing different kinds of amino acids, such as aspartic acid (Asp), tyrosine (Tyr) and tryptophan (Trp) were studied. The results indicated that different crystallization types of the crystals, which were calcium oxalate monohydrate (COM), calcium oxalate dihydrate (COD) and calcium oxalate trihydrate (COT), existed in bulk aqueous solution. But CaC2O4 growth mainly paralleled with (1 01) plane of COM in reverse microemulsion because of the induction of surfactant at water/oil interface. After adding amino acids into microemulsions, the growth of CaC2O4 crystals mainly influenced by the varieties of amino acids and the pH values of the amino acid aqueous solution. When pH values of the solutions was higher than isoelectric points of amino acids, CaC2O4 crystal paralleled with (1 01) plane of COM more easily with the addition of Trp, Tyr, Asp in turn; however, when pH of the solutions was lower than isoelectric points of Trp, CaC2O4 crystal growth paralleled with (020) face of COM. It is obviously that amino acids, pH values of the solutions and surfactant played important roles in the process of crystal growth of CaC2O4 in the microemulsions. The formation mechanism of CaC2O4 was also discussed in different microemulsions at last.     

Cr,Fe,Cu/Al2O3界面化学结构的光电子能谱

应用Ｘ－射线光电子能谱，通过离子刻蚀，原位研究第四周期过渡金属与氧化铝所形成界面的化学状态，结果表明，Ｃｒ，Ｆｅ在界面处有不同程度的氧化，氧化程度Ｃｒ＞Ｆｅ，而Ｃｕ则无明显氧化。化学成份的定量分析表明，界面过渡层的厚度与界面化学反应强弱直接相关。     

EPR spectroscopy on irradiated nickel tetracyanide in NaCl host lattice: mechanism for the simultaneous formation of reduced and oxidized species

The kinetics of oxidized and reduced Ni²⁺ complexes produced by X-ray irradiation on single crystals of NaCl doped with [Ni(CN)₄]²⁻ is studied by Electron Paramagnetic Resonance at room temperature. The interdependent generation of these two complexes is attributed to migration of the charge compensating vacancy from the reduced to the oxidized complex in a reversible reaction. At higher X-ray doses, there is a predominant formation of the reduced complex.     

Surface film formation on a graphite electrode in Li‐ion batteries: AFM and XPS study

The formation of a passivation film (solid electrolyte interphase, SEI) at the surface of the negative electrode of full LiCoO₂/graphite lithium‐ion cells using LiPF₆ (1M ) in carbonate solvents as electrolyte was investigated by means of x‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The analyses were carried out at different potentials of the first and the fifth cycles, showing the potential‐dependent character of the surface‐film species formation. These species were mainly identified as Li₂CO₃ up to 3.8 V and LiF up to 4.2 V. This study shows the formation of the SEI during charging and its partial dissolution during discharge. Copyright © 2005 John Wiley & Sons, Ltd.