Glucose utilization by lysine-producing fluoroacetate-sensitive mutants ofCorynebacterium glutamicum

A fluoroacetate-sensitive mutant was isolated fromCorynebacterium glutamicum, ATCC 21513, following mutagenesis with NTG. Batch fermentations show that in terms of growth kinetics, glucose utilization, and lysine formation, there are significant differences between the mutant and the parent. The mutant’s specific growth rate (0.22/h) is lower than that for the parent (0.34/h). Also, the yield expressed as lysine/glucose consumed does not alter as a function of the glucose concentration for the mutant, and is about 0.22, whereas for the parent, this coefficient decreases with increasing glucose concentration. The maximum specific rate of lysine production for the mutant is 1.3 g/L/h that is about two-fold higher than that for the parent.     

Thermochemistry of Amines: Experimental Standard Molar Enthalpies of Formation of N-Alkylated Piperidines

The standard molar enthalpies of formation _f H _m ^° (l) at the temperature T = 298.15 K were determined using combustion calorimetry for N-methylpiperidine (A), N-ethylpiperidine (B), N-propylpiperidine (C), N-butylpiperidine (D), N-cyclopentylpiperidine (E), N-cyclohexylpiperidine (F), and N-phenylpiperidine (G). The standard molar enthalpies of vaporization _l ^g H ^{m °} of these compounds were obtained from the temperature variation of the vapor pressure measured in a flow system. From these data the following standard molar enthalpies of formation in gaseous phase _f H _m ^° (g) were derived for: A –(61.39 ± 0.88); B –(88.1 ± 1.3); C –(105.81 ± 0.66); D –(126.2 ± 1.3); E ( –88.21 ± 0.75); F –(135.21 ± 0.94); G (70.3 ± 1.4) kJ · mol^–1. They are used to determine the strain enthalpies of the cyclic amines A–G. The N-alkylated piperidine rings have been found to be about strainless.     

Influence of the surface morphology on the melting of polymer crystals. I. Loops of random length and adjacent reentry

A polymer crystal with a noncrystalline surface layer formed by chain loops of different lengths is considered. It is assumed that the length of each loop can be changed by longitudinal diffusion of the molecule through the crystal lattice. From the condition that the free energy of the system is minimum, the loop length distribution and the average loop length as function of temperature are calculated. In contrast to the results for loops of equal length, for the present model, a substantial thickness of the noncrystalline surface layer and a broad melting range is obtained also for the case of adjacent reentry. In order to get this result one has to take into account that even an “ideal fold” consists of at least four rigidly arranged CH2 groups in energetically unfavored conformation.     

Mixed mode fracture of a piezoelectric–piezomagnetic bi-layer structure with two un-coaxial cracks parallel to the interface and each in a layer

The purpose of the present work is to study the mixed mode fracture of a piezoelectric–piezomagnetic composite with two un-coaxial cracks parallel to the interface and each in a layer. Methods of generalized dislocation simulation, Green’s function, Cauchy singular integral equation and Lobatto–Chebyshev collocation are combined together to get the numerical results of mechanical strain energy release rate (MSERR). Three kinds of effects are revealed by parametric studies, i.e., the free-surface effect, the shielding effect and the interference effect, and they are used to interpret the characteristics of COD and MSERR curves. In addition, the effects of shear loading, magnetic loading and electric loading on MSERR are also disclosed, respectively, by varying the corresponding loading factor.     

Shear and extensional rheology of entangled polymer melts: Similarities and differences

This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities have recently been identified for both step strain and startup continuous deformation, including elastic yielding, i.e., chain disentanglement after cessation of shear or extension, and emergence of a yield point during startup deformation that involves a deformation rate in excess of the dominant molecular relaxation rate. At a sufficiently high constant Hencky rate, uniaxial extension of an entangled melt is known to produce window-glass-like rupture. The present study provides evidence against the speculation that chain entanglements tie up into "dead knots" in constant-rate extension because of the exponentially growing chain stretching with time. In particular, it is shown that even Instron-style tensile stretching, i.e., extending a specimen by applying a constant velocity on both ends, results in rupture. Yet, in the same rate range, the same entangled melt only yields in simple shear, and the resulting shear banding is clearly not a characteristic of rupture. Thus, we conclude that chain entanglements respond to simple shear in the manner of yielding whereas uniaxial extension is rather effective in causing some entanglements to lock up, making it impossible for the entanglement network to yield at high rates.     

A comparative first-principles study on electronic structures and mechanical properties of ternary intermetallic compounds Al8Cr4Y and Al8Cu4Y: Pressure and tension effects

An investigation into the bulk properties, elastic properties and Debye temperature under pressure, and deformation mode under tension of Al₈Cu₄Y and Al₈Cr₄Y compounds was investigated by using first principles calculations based on density functional theory. The calculated lattice constants for the ternary compounds (Al₈Cu₄Y and Al₈Cr₄Y) are in good agreement with the experimental data. It can be seen from interatomic distances that the bonding between Al1 atom and Cr, Y, and Al2 atoms in Al₈Cr₄Y are stronger than Al₈Cu₄Y. The results of cohesive energy show that Al₈Cr₄Y should be easier to be formed and much stronger chemical bonds than Al₈Cu₄Y. The bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν can be obtained by using the Voigt–Reuss–Hill averaging scheme. From the results of elastic properties, Al₈Cr₄Y has the stronger mechanical behavior than Al₈Cu₄Y. Our calculations also show that pressure has a greater effect on mechanical behavior for both compounds. The ideal tensile strength are obtained by stress-strain relationships under [001](001) uniaxial tensile deformation, which are 15.4 and 23.4 GPa for Al₈Cu₄Y and Al₈Cr₄Y, respectively. The total and partial density of states and electron charge density under uniaxial tensile deformations for Al₈Cu₄Y and Al₈Cr₄Y compounds are also calculated and discussed in this work.     

A comparison of best fit lines for data with outliers

Three techniques for determining a straight line fit to data are compared. The methods are applied to a range of datasets containing one or more outliers, and to a specific example from the field of chemistry. For the method which is the most resistant to the presence of outliers, a Microsoft Excel spreadsheet, as well as two Matlab routines, are included which can be used to determine the slope and intercept estimates.     

Classroom note: Using the binomial series to prove the arithmetic mean–geometric mean inequality

In 1968, Leon Gerber compared (1 + x) ^a to its kth partial sum as a binomial series. His result is stated and, as an application of this result, a proof of the arithmetic mean–geometric mean inequality is presented.     

Stress-Strain Behavior of Shape Memory Polymers by 1WE Method: Application to Tecoflex®

Thermomechanical cycles including programming, cooling, unloading and heating to trigger the 1WE were examined for a shape memory polymer (SMP), Tecoflex® (TFX EG-72D). Cycles were performed at 60°C with 50% and 225% strains and the recovery time of 10 min. Strains evolving with time were estimated during the thermomechanical treatments for the total 44 cycles using 50% strains and the total 50 cycles using 225% strains. Recovery ratios for 50% strains and 225% were also estimated. It turns out that programming, cooling, unloading and heating to trigger the 1WE causes an increase of irreversible strain and is associated with a corresponding decrease of the intensity of the 1WE in particular during the first thermomechanical cycles. In parallel scanning electron microscopic study using secondary electron imaging shows a very slight wavy surface structure evolved during cycling.     

In Silico Design of Heteroaromatic Half‐Sandwich RhI Catalysts for Acetylene [2+2+2] Cyclotrimerization: Evidence of a Reverse Indenyl Effect

A mechanistic density functional theory study of acetylene [2+2+2] cyclotrimerization to benzene catalyzed by Rh^I half metallocenes is presented. The catalyst fragment contains a heteroaromatic ligand, that is, the 1,2‐azaborolyl (Ab) or the 3a,7a‐azaborindenyl (Abi) anions, which are isostructural and isoelectronic to the hydrocarbon cyclopentadienyl (Cp) and indenyl (Ind) anions, respectively, but differ from the last ones on having two adjacent carbon atoms replaced with a boron and a nitrogen atom. The better performance of either the classic hydrocarbon or the heteroaromatic catalysts is found to depend on the different mechanistic paths that can be envisioned for the process. The present analyses uncover and explain general structure–reactivity relationships that may serve as rational design principles. In particular, we provide evidence of a reverse indenyl effect.