DIELECTRIC EFFECT ON THE RADIO-FREQUENCY CHARACTERISTICS OF A RECTANGULAR WAVEGUIDE GRATING TRAVELING WAVE TUBE

A new type of partial-dielectric-loaded rectangular waveguide grating slow-wave structure (SWS) for millimeter wave traveling wave tube (TWT) is presented in this paper. The radio-frequency characteristics including the dispersion properties, the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analyzed. The results show that the dispersion of the rectangular waveguide grating circuit is weakened, the phase velocity is reduced and the position of the maximum E _z is basically invariant after partially filling the dielectric materials in the rectangular waveguide grating SWS. Although the coupling impedance decreases a little, it still keeps above 40 Ω.     

基于反向传播神经网络的阻抗断层图像重建新方法

电阻抗成像是通过对物体表面电压、电流的测量来重建物体内部阻抗分布或变化图像的一种新颖计算机断层成像技术。阻抗断层图像重建是一种病态的、非线性的逆问题。提出了一种全新的阻抗断层图像重建方法，它利用反向传播神经网络来表征物体内部阻抗变化位置与物体表面电压变化大小的非线性映射关系，从而可以根据对物体表面测量电压的变化先准确定位阻抗变化区域，再用线性近似方法重建阻抗变化图像，这种方法不仅具有一定的抗噪能力，而且成像精度和空间分辨率都大大好于逆投影方法。     

Electrochemical impedance spectroscopy and linear polarization applied to evaluation of porosity of phosphate conversion coatings on electrogalvanized steels

In this work, electrochemical impedance spectroscopy and linear polarization are used in determining porosity of zinc phosphates, and of nickel and manganese modified zinc phosphates on electrogalvanized steel. The porosity of the phosphate layers ranges from 0.1% for the manganese-modified hopeite to 8% for hopeite, using the linear polarization and the electrochemical impedance spectroscopy techniques. The porosity values measured using the two techniques were in agreement. All impedance spectra of coated samples showed two steps, with two capacitive arcs and an inductive looping.     

自组装双硫醇分子膜阻抗谱的研究

对交流电场下双巯基烷烃硫醇自组装分子膜的阻抗谱进行了研究.利用汞金属作为衬底,制备出双巯基烷烃硫醇自组装分子膜,并通过交流频谱仪对其进行频谱的扫描．明确了膜的作用范围为阻抗谱中频部分为了解释该阻抗谱,提出了一种串联的等效电路来进行了拟合,并与其他的模型进行比较.同时,观察到在损耗谱中损耗峰随硫醇碳链原子数的增加而向低频方向移动并得出双巯基硫醇(C6-C10)在交流电场下的激活能为23～39 meV．     

Holographic interferometry as electrochemical emission spectroscopy of a carbon steel in 5–20 ppm TROS C-70 inhibited seawater

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of a carbon steel in blank seawater and seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, as an electromagnetic method, and by the electrochemical impedance (EI) spectroscopy, as an electronic method. So, the abrupt rate change of the number of the fringe evolutions during corrosion tests, EI spectroscopy, of the carbon steel is called electrochemical emission spectroscopy. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of TROS C-70 corrosion inhibitor using the EI spectroscopy method, at room temperature. The electrochemical-emission spectra of the carbon steel in different solutions represent a detailed picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data, which was obtained from the EI. spectroscopy. Consequently, holographic interferometry is found very useful for monitoring the anodic dissolution behaviors of metals, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

Electrochemical characterization of composite membranes based on crown-ethers intercalated into montmorillonite

Oxyethylene macrocyclic compounds (crown-ethers) act as ligands of intracrystalline cations of certain layered silicates as montmorillonites. Stable intercalation materials are formed which are used to prepare organic-inorganic membranes by encapsulating these intercalation compounds with a poly-butadiene thin coating. Electrochemical Impedance Spectroscopy (EIS) is used to study the resulting composite membranes in contact with aqueous electrolytes. From the impedance plots, the ionic resistance of the membranes is obtained. The thickness of the polybutadiene coating is an important factor determining the ability of ions to pass across the membrane. Marked differences in the ionic resistance are observed as a function of the nature of the interlayer macrocyclic compound. For non-intercalated montmorillonite membranes, the ionic resistance is strongly reduced, whereas for some crown-ether intercalated materials such as 18-crown-6 and dibenzo 24-crown-8, iono-selective membranes are obtained. Concerning the nature of the electrolyte, cations exhibiting greater hydration energies show higher difficulties to pass through the membrane and, consequently, the ionic resistance increases.     

Structure–electrical property study of anisotropic polyaniline films

The relationships of the structure and electrical properties of anisotropic HCl‐doped polyaniline (PANI) films cast from N,N′‐dimethylpropylene urea (DMPU) solutions and stretched to different draw ratios were studied. The anisotropic structure of the stretched PANI films was examined by X‐ray diffraction, near‐infrared wave‐guide coupling, and polarized infrared measurements. The PANI emeraldine base (EB) films cast from DMPU solutions had a single‐phase noncrystalline structure, and stretching of the films did not cause crystallization to occur. The transition moment angles of two weakly absorbing infrared bands were determined, and the Hermans' orientation functions for the PANI EB films were calculated. The PANI films were then doped with HCl, and the electrical properties were determined by impedance spectroscopy. With a specially designed test fixture, the in‐plane and through‐plane impedance was obtained. The conductivity along the stretch direction increased with orientation. The in‐plane conductivity was significantly higher than the through‐plane conductivity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 823–841, 2003     

RPC读出条的阻抗匹配

文章对高阻板探测器读出条的阻抗匹配问题进行了研究;引入了一个用于计算带状线特性阻抗的经验公式.测量的特性阻抗与经验公式很好地符合,说明这个经验公式可以用于RPC读出条特性阻抗的计算,以改善RPC读出信号的质量,利于RPC探测器性能的测量.     

Sm_(0.5)Sr_(0.5)CoO_3阴极氧还原动力学

利用极化、交流阻抗技术考察了担载于La0.9Sr0.1Ga0.8Mg0.2O3(LSGM)电解质上的Sm0.5Sr0.5CoO3-La0.8Sr0.2Ga0.8Mg0.15Co0.05O3(SSC-LSGMC5)复合阴极的氧还原反应动力学.在SSC-LSGMC5阴极氧还原反应的阻抗谱中可以观察到明显的两个半圆.高频环的电导与氧分压无关,低频环的电导正比于氧分压的0.5次方.并且低频环的氧分压级数随着反应温度的降低而减小,可能对应于吸附氧原子的扩散过程.SSC-LSGMC5极化曲线与经典的Butler-Volmer方程吻合.阴、阳极的电荷转移系数均为1左右,交换电流密度的氧分压级数为1/4,对应于电荷转移过程.实验结果显示SSC-LSGMC5上的氧还原反应机制随反应条件的不同而发生变化.     

高聚物固体电解质聚氧化乙烯－溴化铜复阻抗谱及介电常数的静水压效应

采用分子量５００万的聚氧化乙烯和无水溴化铜，通过混溶蒸发法制备成高聚物固体电解质Ｐ（ＥＯ）ｎ－ＣｕＢｒ２薄膜，并在０．１～３００ＭＰａ范围不同的流体静水压下详细测量其复平面阻抗谱，分别得到在不同压力下离子电导率和介电常数与测量频率的关系．进一步解谱准确地求出Ｐ（ＥＯ）ｎ－ＣｕＢｒ２（ｎ＝１２、１６）薄膜离子电导率和介电常数的静水压效应，并结合Ｘ－光物相分析，根据离子迁移通道的物理图象和高聚物的极化机构进行了初步的讨论．添加２０％的增塑剂碳酸丙烯酯，较大改进了压力下的导电性．１２０～３００ＭＰａ的离子电导率提高一个数量级