Vacuum Rabi Splitting and Kerr Effect of a Hybrid Spin–Magnon–Photon System

The vacuum Rabi splitting and Kerr effect are investigated theoretically in a hybrid spin–magnon–photon system, where the nitrogen-vacancy center in diamond driven by two light fields is coupled to a spherical micromagnet embedded in a superconducting coplanar waveguide resonator. The results indicate that the phenomenon of the Mollow triplet and vacuum Rabi splitting can appear by controlling the spin–magnon coupling and magnon–photon coupling. It is shown that the probe absorption spectrum can be adjusted effectively via the pump frequency detuning. Moreover, it is demonstrated that the optical Kerr effect can be tuned by changing the Rabi frequency. This work may provide a possibility for the applications in quantum information processing and quantum sensing of magnetic signal.     

HL-2M装置低杂波钛泵电流监测器的研制

选用Arduino nano开源硬件平台、OLED图形显示器和SD卡等器件,研制了钛泵电流监测器,实现了在非实验期间钛泵电流长期低速采集、存储和趋势图显示功能。同时启用内部中断和外部中断,提升采样频率到1k Hz,拓展了监测器的应用范围。测试结果表明,监测器趋势图与测试信号一致,最大采集误差为0.25μA。     

Design of a coated thinly clad chalcogenide long-period fiber grating refractive index sensor based on dual-peak resonance near the phase matching turning point

A novel method for designing chalcogenide long-period fiber grating (LPFG) sensors based on the dual-peak resonance effect of the LPFG near the phase matching turning point (PMTP) is presented. Refractive index sensing in a high-refractive-index chalcogenide fiber is achieved with a coated thinly clad film. The dual-peak resonant characteristics near the PMTP and the refractive index sensing properties of the LPFG are analyzed first by the phase-matching condition of the LPFG. The effects of film parameters and cladding radius on the sensitivity of refractive index sensing are further discussed. The sensor is optimized by selecting the appropriate film parameters and cladding radius. Simulation results show that the ambient refractive index sensitivity of a dual-peak coated thinly clad chalcogenide LPFG at the PMTP can be 2400 nm/RIU, which is significantly higher than that of non-optimized gratings. It has great application potential in the field of chemical sensing and biosensors.     

Active learning for OPM in FMF systems

Optical performance monitoring (OPM) is essential to guarantee the robust and reliable operation of few-mode fiber (FMF)-based transmission. The available OPM methods including the analytical models such as the enhanced Gaussian noise model provide high accuracy along with high computational complexity which makes them improper for real-time implementations. As an alternative approach, machine learning (ML)-based OPM removes this barrier at the cost of leveraging a large training dataset. However, generating a field or synthetic dataset for FMF-based transmission is very hard and time-consuming. As a specific ML deployment, active learning (AL) is designed to work with a small training dataset, therefore, in this paper, we employ AL for OPM in FMF-based transmission. Results indicate that the proposed AL-based OPM can properly estimate the generalized signal-to-noise ratio by using a very small training dataset and achieve the root mean squared error similar to that obtained by working on large training datasets.     

Theoretical analysis of non-uniform extensional flows in relation to processing rheology and predictions of some constitutive equations

In this paper, a characteristic equation involving the stream function, already given by one of the authors in a previous work for classifying axisymmetric incompressible flows, is re-considered. Non-uniform nearly extensional flows are derived as particular solutions from this equation. Using experimental data in the literature for polymer solutions and melts, it is proved that particular solutions of the characteristic equation lead to kinematics very close to those encountered in the fiber-spinning process. The kinematic equations satisfactorily correlating the fiber-spinning data are used in order to determine the ability of constitutive equations to predict realistic stresses in the flow domain. The rheological parameters of the fluids, obtained from experiments, are used for computation of differential and integral constitutive equations in the spinning conditions. Comparisons with the stress response of adequate constitutive equations are given and discussed.Also affiliated to: Université Joseph Fourier Grenoble I and Institut National Polytechnique de Grenoble, Associé au CNRS (URA 1510)     

一种求解层合圆柱壳的杂交应力单元

根据修正的余能原理，推导出一种求解复合材料层合圆柱壳的杂交应力单元。取用六面体等参单元，此单元反映了各层材料性质不同及应力分布沿整个厚度不连续现象，同时计入横向剪切变形和法向挤压变形，适用于厚层壳体。文章通过实例说明此单元能准确求出各层内的应力值，实用价值高。     

含夹杂和微裂纹复合材料的损伤演化和分析

利用细观力学的Ｅｓｈｅｌｂｙ和Ｍｏｒｉ－Ｔａｎａｋａ理论，考虑纤维和微裂纹之间的相互作用，研究了定向分布微裂纹的演化规律及其对材料力学性能的影响，分析了纤维体积份数，弹性系数、微裂纹密度，纤维不同取向与基体开裂强度之间的变化关系，并给出了许多有意义的结论。     

A PREDICTIVE APPROACH TO THE IN-PLANE MECHANICAL PROPERTIES OF STITCHED COMPOSITE LAMINATES

This contribution attempts to model the alteration of the in-plane elastic properties in laminates caused by stitching,and to predict the in-plane effective tensile strength of the stitched composite laminates.The distortion of in-plane fibers is considered to be the main cause that affects the in-plane mechanical properties.A fiber distortion model is proposed to characterize the fiber misalignment and the fiber content concentration due to stitching.The undistorted region,the fiber distortion region,the resin-rich pocket and the through-thickness reinforcement section are taken into account.The fiber misalignment and inhomogeneous fiber content due to stitching have been formulated by introducing two parameters,the distortion width and maximum misalignment.It has been found that the ply stress concentration in stitched laminates is influenced by the two concurrent factors,the stitch hole and inhomogeneous fiber content.The stitch hole brings about the stress concentration whereas the higher fiber content at the local region induced by stitching restrains the local deformation of the composite.The model is used to predict the tensile strength of the [0/45/0/-45/90/45/0/-45]_(2s) T300/QY9512 composite laminate stitched by Kevlar 29 yarn with different stitching configurations,showing an acceptable agreement with experimental data.     

单向连续竹纤维增强聚合物的拉伸性能

描述了一种单向连续竹纤维增强聚合物试件的制作工艺过程:研究了该型竹纤维增强复合材料的拉伸力学性能。将该性能与单向连续玻璃纤维增强聚合物的拉伸力学性能进行了比较,发现竹纤维增强聚合物的拉伸模量要明显高于玻璃纤维增强聚合物的对应值,而其拉伸强度和玻璃纤维增强聚合物的相当。同时发现竹纤维增强聚合物的纵向延展性较小,呈现一次性单界面脆性断裂状况,相对地,连续玻璃纤维增强聚合物的拉伸断裂是多次多界面分段断裂。     

陶瓷阻力曲线测定的新方法——断裂栅法

将零厚度单向试件栅刻蚀工艺应用于晶须增韧氮化硅陶瓷基复合材料表面，通过记录试件所在桥路的输出电压值，可得到随载荷不断增大裂纹逐渐向前扩展过程中每一时刻的裂尖位置和裂纹长度，从而得到该种材料的阻力曲线。