Minkowski-type and Alexandrov-Type Theorems for Polyhedral Herissons

Classical H. Minkowski theorems on existence and uniqueness of convex polyhedra with prescribed directions and areas of faces as well as the well-known generalization of H. Minkowski uniqueness theorem due to A.D. Alexandrov are extended to a class of nonconvex polyhedra which are called polyhedral herissons and may be described as polyhedra with injective spherical image.     

Synthesis,characterization, and electrical properties of polypyrrole/multiwalled carbon nanotube composites

Size‐controllable polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites have been synthesized by in situ chemical oxidation polymerization directed by various concentrations of cationic surfactant cetyltrimethylammonium bromide (CTAB). Raman spectra, FTIR, SEM, and TEM were used to characterize their structure and morphology. These results showed that the composites are core (MWCNT)–shell (PPy) tubular structures with the thickness of the PPy layer in the range of 20–40 nm, depending on the concentration of CTAB. Raman and FTIR spectra of the composites are almost identical to those of PPy alone. The electrical conductivities of these composites are 1–2 orders of magnitude higher than those of PPy without MWCNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6449–6457, 2006     

Structural and electrical characterization of SxSe100−x thin films

Thin films of samples of the glassy S_xSe_100−x system with 0 ≤ x ≤ 7.28 have been prepared by thermal evaporation technique at room temperature (300 K). X-ray investigations show that the structure of pure selenium (Se) does change seriously by the addition of small amount of sulphur S ≤7.28%. The lattice parameters were determined as a function of sulphur content. Results of differential thermal analysis (DTA) of the glassy compositions of the system S_xSe_100−x were discussed. The characteristic temperatures (T_g, T_c and T_m) were evaluated. Dark electrical resistivities, ρ, of S_xSe_100−x thin films with different thicknesses from 100 to 500 nm, were measured in the temperature range from 300 to 423 K. Two distinct linear parts with different activation energies were observed. The variation of electrical resistivity of examined compositions has been discussed as a function of the film thickness, temperature and the sulphur content. The application of Mott model for the phonon assisted hopping of small polarons gave the same two activation energies obtained from the resistivity temperature calculations.     

Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel

This paper discusses the influence of chemical composition on the final electromagnetic properties in higher permeability material. Furthermore, the effect of the hot rolling practice and the end of austenite transformation temperature range on the hot band microstructure is described. The magnetic polarization J₅₀₀₀ better than 1.7 T, using hot rolling conditions 40 mm transfer bar thickness, finish mill entry temperature 1000 °C, and finishing temperature 800–840 °C and after decarburization heat treatment and grain growth treatment, was obtained.     

外电场下光聚合反应动力学的表征方法

外电场下光聚合反应动力学的表征方法李从武，潘昂上海材料研究所，上海２０００８２）关键词光聚合反应、液晶、外电场、动力学、表征近年来，液晶单体在外场（电场、磁场和剪切力）下在位光聚合反应的研究工作受到了很大的关注［’，ＺＩ．众所周知，热致型侧链高分子液...     

Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

气相色谱-质谱法测定电子电气产品中多溴二苯醚及多溴联苯

建立了利用气相色谱-质谱测定电子、电气产品中多溴二苯醚及多溴苯的方法。对样品的粉碎、提取方法、色谱柱的选择、测定条件进行研究,并自建标准质谱图库;采用保留时间、Br同位素规则、质谱特征离子、谱库检索等4种方式相结合进行定性,避免了假阳性及漏检的情况,结果更加准确可靠。本法检出限为5mg/kg,PBDEs的回收率为91.3%,PBBs的回收率为92.5%,相对标准偏差(RSD)为4.3%。与现有方法相比,本法分离时间最短(6min),具有简便快速、实用性强、灵敏度高、准确可靠等特点,适用于电子电气产品、塑料、橡胶、汽车内饰材料等的溴系阻燃剂分析,满足欧盟RoHS指令检测的要求。     

Darstellung und Kristallstruktur von TICu[CuO2]

Investigations on Electronically Conducting Oxide Systems. XVI. Solid Solutions and Conductivity in the System MgTi₂O₅? Ti₃O₅ Solid solution formation is reported for the system Mg_1–xTi_2–x^IVTi_2x^IIIO₅. With increasing x there is at room temperature a transition from the orthorhombic pseudobrookite structure to the monoclinic low-temperature modification of Ti₃O₅. The X-ray diffraction pattern results are supported by DSC measurements, electrical and magnetic investigations. The tendency of Ti? Ti pair formation in the low-temperature Ti₃O₅ structure is accompanied by a drop of the activation energy for electrical conductivity and a decreasing susceptibility at high Ti^III concentrations.     

Electrophysical and electrochemical properties of Y1 − x Ca x Cr1 − y Me y O3 (Me = Mg, Cu)

Structure, thermal elongation coefficient, and conductivity of Y_{1 ? x} Ca _x Cr_{1 ? y} Me _y O₃ (Me = Mg, Cu) in air are studied at 100–1000°C. Electrochemical activity of electrodes made of most conducting compositions Y_{1 ? x} Ca _x Cr_{1 ? y} Me _y O₃ (Me = Mg, Cu), contacting solid electrolyte 0.9ZrO₂ + 0.1Y₂O₃, is studied over a wide range of polarizations, in air, at 700–900°C.