高功率微波高斯馈源口面场分析

 用波导本征模展开方法对用于高功率微波发射系统的方角锥高斯馈源口面场进行分析，提出结合馈源远场辐射特性和避免高功率击穿折衷选定相应的高斯模注腰半径，进而确定多个波导模幅值，从而为运用模匹配或耦合波理论设计高斯馈源提供依据。     

THE DESIGNS OF HIGH EFFICIENCY LAUNCHER OF QUASI-OPTICAL MODE CONVERTER FOR HIGH POWER GYROTRONS

A high efficiency launcher of quasi-optical (QO) mode converters for high power gyrotrons have been designed and tested. A helical cut launcher radiates the RF power via its straight cut onto the first phase correcting mirror. The launchers have been optimized for the TE_31.8 mode at 170 GHz and TE_22.6 mode at 110 GHz by numerically optimizing a launcher surface. The helical cut of the launcher has been optimized by taking the taper angle into account. Further more, the amplitude of the surface perturbation have been optimized for improved focusing in order to reduce the diffraction losses at the helical cut. Low power measurement shows a good agreement with the design. High efficiency characteristics of the design have also been calculated on the assumption of frequency downshift due to the thermal expansion of the cavity and stepwise frequency tuning by changing the operating mode. Besides, the possibility of high efficiency launcher for higher mode is discussed, and these results give the prospect to high efficiency long pulse gyrotrons.     

微极各向同性弹性板中的Rayleigh-Lamb波

研究了无应力作用条件下，均匀、各向同性、圆柱形微极结构弹性板中波的传播．导出了对称和斜对称模式下波传播的特征方程．对短波这一极端情况，无应力圆板中对称和斜对称模态波的特征方程退化为Pmyle曲表面波频率方程．并得到薄板的计算结果．给出了位移和微转动分量，并绘制了相应图形．给出了若干特殊情况的研究结果及对称和斜对称模态特征方程的图示．     

Molecular dynamics simulations on the structures and properties of ε-CL-20-based PBXs ——Primary theoretical studies on HEDM formulation design

Five polymer bonded explosives (PBXs) with the base explosive ε-CL-20 (hexanitrohexaazaisowurtzi- tane), the most important high energy density compound (HEDC), and five polymer binders (Estane 5703, GAP, HTPB, PEG, and F2314) were constructed. Molecular dynamics (MD) method was employed to investigate their binding energies (Ebind), compatibility, safety, mechanical properties, and energetic properties. The information and rules were reported for choosing better binders and guiding formula- tion design of high energy density material (HEDM). According to the calculated binding energies, the ordering of compatibility and stability of the five PBXs was predicted as ε-CL-20/PEG > ε-CL-20/ Estane5703 ≈ε-CL-20/GAP > ε-CL-20/HTPB > ε-CL-20/F2314. By pair correlation function g(r) analyses, hydrogen bonds and vdw are found to be the main interactions between the two components. The elasticity and isotropy of PBXs based ε-CL-20 can be obviously improved more than pure ε-CL-20 crystal. It is not by changing the molecular structures of ε-CL-20 for each binder to affect the sensitivity. The safety and energetic properties of these PBXs are mainly influenced by the thermal capability (C°p) and density (ρ) of binders, respectively.     

FeCoB-SiO2磁性纳米颗粒膜的微波电磁特性

采用交替沉积磁控溅射工艺制备了超薄多层的FeCoB SiO2 磁性纳米颗粒膜 .利用x射线衍射仪、扫描探针显微镜、透射电子显微镜分析了薄膜的微结构和形貌特征 .采用振动样品磁强计、四探针法、微波矢量分析仪及谐振腔法测量薄膜试样的磁电性能和微波复磁导率 .重点对SiO2 介质相含量、薄膜微结构对电磁性能产生重要影响的机理做了分析和探讨 .结果表明 :这类FeCoB SiO2 磁性纳米颗粒膜具有良好的软磁性能和高频电磁性能 ,2GHz时的磁导率 μ′高于 70 ,可以应用于高频微磁器件或微波吸收材料的设计     

红外单站被动定位技术速度更新算法研究

针对红外单站被动定位技术中空中机动目标的运动速度不断变化这一实际情况,提出了一种基于红外相机运动特性的对目标的运动速度进行实时更新的校正算法.该算法克服了大多基于匀速直线运动这一空间模型的红外单站被动定位方案目标速度不变的缺点,客观地反映了空中机动目标的实际运动状况,不仅能对目标的运动速度进行实时准确的更新校正,而且可推演出一种新的红外单站被动定位算法,对推动红外单站被动定位技术的工程实用化进程具有重要的意义.     

Al/Al2O3P金属基复合材料的静动态压缩性能及损伤分析

用气压浸渗工艺制备了体积分数40％～50％Al2O3颗粒增强纯铝基复合材料，使用了4种不同尺寸的Al2O3颗粒，其平均粒径分别为5μm、10μm、30μm和60μm．测定了这些复合材料的静、动态压缩性能，并通过材料压缩前后密度变化的测量定量表征了材料的累计损伤，结果表明，与基体材料相似，这些复合材料表现出明显的应变率敏感性；当增强颗粒平均粒径小于60μm时，材料的累计损伤基本与应变率无关，而主要取决于材料的应变．材料中颗粒的破裂主要是由颗粒间的相互作用引起的．较小尺寸颗粒增强的复合材料具有较高的流动应力和较小的累计损伤，并随着颗粒体积分数的增加，材料的流动应力和损伤率都相应增加．     

侵彻环境下两种钨合金的细观响应特性

本文实验发现具有较大密度和较高速度的93W钨合金长杆模拟弹的穿靶深度反而比密度较小，速度较低的90W钨合金长杆弹的穿靶深度小．针对这一现象，本文从两种材料在侵彻环境下的细观响应特性的差异上给出了有实验根据的合理分析，结论是90W在侵彻环境下较易于形成绝热剪切带，从而在弹头部发生“自锐化”效应所致．     

高温超导体的结构组装

 在总结铜氧化物高温超导体晶体结构特点的基础上，提出了以无限层结构Cu-O钙钛矿为核心的结构组装概念，通过和相关结构的外延组合，衍生出了高温超导体的主要晶体构型。进一步运用此观念，建立了新的三元数命名法，并对高温超导体的晶体结构进行了归类。     

板状激光振荡介质温度场和应力场的数值模拟

以非均匀内热源模型为基础,并考虑材料的导热系数和热膨胀系数的温度相关性,利用有限元方法,对板状激光振荡介质在不同功率和冷却强度下的温度和热应力分布进行了数值模拟及分析。根据计算结果提出了最大有效换热系数的概念,指出换热系数超过最大有效换热系数后,继续强化传热对减小高功率激光器的热效应已无明显效果。以此得出采用常规冷却技术所允许的最大泵浦加热功率。