Steam-carbon gasification catalyzed by calcium: Assessment of the porous structure of active carbons from plum stones and synthetic active carbons

A need for an elaboration of the methods for synthesis and characterization of activated carbons with a requisite porous structure has existed for a long time. One of the methods giving possibility for creating controlled mesopore and micropore structures deals with the steam gasification of various carbon materials. In this work the effects of calcium catalyst on the catalytic steam gasification of active carbons from plum stones and porous polymers are presented. Determination of micropores capacity and specific adsorption in mesopores have been performed by means of the _s method, but adsorption on the heterogeneous solids was described by the integral equation with various local isotherms. This equation has been solved by the regularization method. Based on this method the changes in structural parameters of active carbons depending on the amount of calcium catalyst were estimated.Nomenclature d width of slit-like micropore - F(x) distribution function of the half-width - p vapor pressure of sorbate - p/p _N relative pressure - PSAC Plum Stone Active Carbon - average pore radius, nm - S ₁ relative limit of the validity of experimental point on the adsorption isotherm in the computations by means of regularization method - SAC Synthetic Active Carbon - S _BET specific surface area calculated by means of BET method, m²/g - S _mes mesopore surface area, m²/g - S _mic micropore surface area, m²/g - T absolute temperature, K - V _mes sorption capacity of mesopores, cm³/g - V _mic sorption capacity of micropores, cm³/g - V _p sorption capacity of pores, cm³/g - w/w weight in weight concentration - x half-width of slit-like micropore, nm - x ₁ maximum of half-width of micropore slit, nm - average half-width of slit-like micropore, nm - X _min-X _max integration limits of thex Greek Letters Greek Letters variance of average half-width of slit-like micropore, nm² - local relative filling of micropores - total relative filling of micropores     

过渡金属乙酰丙酮螯合物的体积排除色谱研究

用定量体积排除色谱方法研究了过渡金属Fe(Ⅲ)、Co(Ⅲ)、Cu(Ⅱ)、Ni(Ⅱ)的乙酰丙酮螯合物在四氢呋喃溶液中的加合和缔合行为。在溶液中乙酰丙酮钴(Ⅲ)以单个螯合物分子的形式存在,乙酰丙酮铜(Ⅱ)和乙酰丙酮铁(Ⅲ)与溶剂加合生成加合物,乙酰丙酮铁(Ⅲ)除加合物外还存在缔合度为2-10的多分散缔合物,乙酰丙酮镍(Ⅱ)水合物在四氢呋喃中产生了加合交换作用,同时存在缔合度为6左右的缔合物。色谱数据给出了螯合物、加合物及缔合物     

The preparation of 7-substituted norbornadiene-2,3-dicarboxylic anhydrides and an experimental and theoretical study of their reactivity

Four new substituted methano-bridged or heteroatom-bridged norbornadienomaleic anhydrides have been prepared and converted to sesquinorbornadiene anhydrides by reaction with cyclic 1,3-dienes. The versatility of parity reversal, in conjunction with N-substituent steric effects, has been used to produce all three possible stereoisomers of the N,O-sesquinorbornadiene anhydrides in separate, stereoselective cycloadditions. The anhydrides have been synthesized by cyclization of their diacids (in situ production) or by flash vacuum pyrolysis of their furan adducts (yielding crystalline products); further fragmentation occurs at these or higher temperatures to produce five-membered carbocyclic or heterocyclic anhydrides. Activation energies have been evaluated for the fragmentation and cycloaddition processes using DFT calculations (B3LYP/6-31G∗) and these calculations correctly predict, which reaction can be intercepted at the norbornadienomaleic anhydride stage and preferred stereochemistry of cycloadducts.     

非绝热聚合波的数学模拟

对非绝热波聚合体系进行了数学模拟, 将反应器尺寸与聚合波关联, 建立了非绝热条件下蔓延聚合波波速和最大波温的数学模型; 利用所建模型计算不同引发剂浓度、 不同环境温度、 不同试管直径下淀粉接枝聚合波的波速和波温, 并与实验测定值进行了比较. 结果表明, 非绝热聚合波的数学模型对无相变体系的拟合结果令人满意, 对聚合波的发生条件及反应器尺寸的影响有很好的预见性; 另一方面, 对于存在相变及与环境有质量交换的波聚合体系, 所建模型的预测性受到了限制.     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

4,6—二取代—3—酮—5硫酮—1,2,4—三嗪类化合物的质谱研究

1,2,4-三嗪类化合物具有抗癌、抗病毒、杀虫、抑制中枢神经系统等多种作用。前文用苯甲酰基硫代甲酰胺直接与氨基脲反应,制备了8种新的4,6-二取代-3-酮-5-硫酮-1,2,4-三嗪类化合物(a—h),本文测定了其电子轰击质谱、高分辨质谱及联动扫描质谱,以了解其质谱裂解途径。     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Supramolecular Templating of Mesopores in Phase-Separating Silica Sol-Gels Incorporated with Cationic Surfactant

Silica gels with hierarchical macropores and mesopores have been prepared by inducing phase separation in the alkoxide-based sol-gel system with an addition of alkyltrimethylammonium salt. Narrowly distributed mesopores were observed in the heat-treated gel samples possibly as a result of supramolecular templating of silica oligomers in the reacting solution. The ionic attractive interaction and hydrophobicity of the attached alkyl group cooperatively determined the phase separation tendency. No indication of long-range order of the mesopores was obtained.     

乙醇 /水混合溶剂沉淀制备纳米BaF2及粒径控制

采用水和乙醇混合溶剂沉淀的方法制备了不同粒径的BaF₂纳米粉体。用XRD、TEM和FSEM表征了粉体的粒径和形貌。研究了陈化时间、水和乙醇的体积比对BaF₂纳米粉体的粒径和形貌的影响。结果表明，随混合溶剂中乙醇含量升高，沉淀粒径减小。BaF₂沉淀粒径的倒数和溶剂介电常数的倒数呈线性关系，据此关系可以控制BaF₂纳米粉体的粒径。