Enhanced Power Density of Alcohol Biofuel Cell by Polymer-assisted Crosslinks of 3D Graphene on Carbon Paper as the Bioanode

Herein, we successfully construct the 3D biocompatible graphene through crosslinking 2D graphene nanosheet onto carbon fiber paper with poly(diallyldimethylammonium chloride) (PDDA) as anode of the alcohol biofuel cell. Compared with the bioanode without 3D graphene, the current density and output power of PDDA-graphene-ADH bioanode is increased by 23 % and 41 % at a high concentration of ethanol at pH 8.9, suggesting the stabilization role of graphene in enzyme loading. The study provides us a deep analysis on structures and performances of the bioanode incl. electrochemistry, X-ray photoelectron spectra, and atomic force microscopy images, which is significant to develop the new methods to construct 3D porous electrodes in energy conversion device.     

Effects of van der Waals force on nonlinear vibration of electromechanical integrated electrostatic harmonic actuator

An electromechanical integrated electrostatic harmonic actuator is promising for the miniaturization of electromechanical devices. As the dimensions of the actuator decrease, the effects of the van der Waals force become obvious. In this study, by considering the nonlinearity of electrostatic and van der Waals forces, nonlinear vibration equations of the flexible ring of an electrostatic harmonic actuator are deduced. Using these equations, the nonlinear free vibration and nonlinear forced response of the actuator are investigated. The effects of the van der Waals force on the nonlinear vibration of the flexible ring are analyzed. Results show that these effects of the van der Waals force are relatively obvious under some conditions and should be considered.     

Direct visualization of the nanoscopic three‐phase structure and stiffness of NBR/PVC blends by AFM nanomechanical mapping

The PeakForce Quantitative Nanomechanical Mapping based on atomic force microscope (AFM) is employed to first visualize and then quantify the elastic properties of a model nitrile rubber/poly(vinyl chloride) (NBR/PVC) blend at the nanoscale. This method allows us to consistently observe the changes in mechanical properties of each phase in polymer blends. Beyond measuring and discriminating elastic modulus and adhesion forces of each phase, we tune the AFM tips and the peak force parameters in order to reliably image samples. In view of viscoelastic difference in each phase, a three‐phase coexistence of an unmixed NBR phase, the mixed phase, and PVC microcrystallites is directly visualized in NBR/PVC blends. The nanomechanical investigation is also capable of recognizing the crosslinked rubber phase in cured rubber. The contribution of the mixed phase was quantified and it was found that the mechanical properties of blends are mainly determined by the homogeneity and stiffness of the mixed phase. This study furthers our understanding the structure–mechanical property relationship of thermoplastic elastomers, which is important for their potential design and applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 662–669     

Imaging and tracking an electrostatic charge micro-domain by Kelvin force microscopy as evidence of water adsorption on mica surface

Muscovite mica is a widely accepted substrate for scanning probe microscopy (SPM) investigations. However, mica has intrinsic properties that alter samples and obstruct their analysis due to free charges build-up, ionic exchange and water adsorption taking place at the surface. In addition to interfacial phenomena, there is a growing interest in electrostatic charges on insulators as they are crucial in diverse applications. Despite the high demand for studies of this nature, experimental set-ups capable of resolving charge build-up at the micro-scale are still scarce and technically limited. Here, we report the imaging of surface charge dissipation on freshly cleaved mica by Kelvin-probe Force Microscopy (KPFM). A local electrostatic charge micro-domain was generated by friction between an atomic force microscope (AFM) tip and mica, and its decay was tracked by two-dimensional mapping using KPFM. We found time-dependent charge dissipation, which is attributed to the adsorption of water molecules on mica surface.     

Atmospheric oxidation chemistry of 1–methoxy 2–propyl acetate initiated by OH radicals: kinetics and mechanisms

Kinetics and mechanism of the gas-phase reaction of CH₃C(O)OCH(CH₃)CH₂OCH₃ (MPA) with OH radicals in the presence of O₂ and NO have been investigated theoretically by performing a high and reliable level of theory, viz., CCSD(T)/6-311?+?G(d,p)//BH&HLYP/6-311++G(d,p)?+?0.9335×ZPE. The calculations predict that the H-abstraction from the ?CH₂?O? position of MPA is the most facile channel, which leads to the formation of the corresponding alkoxy radicals CH₃C(O)OCH(CH₃)C(O ?)HOCH₃ under atmospheric conditions. This activated radicals CH₃C(O)OCH(CH₃)C(O ?)HOCH₃ will undergo further rearrangement, fragmentation and oxidative reactions and predominantly leads to the formation of various products (methyl formate HC(O)OCH₃ and acetic anhydride CH₃C(O)OC(O)CH₃). In the presence of water, acetic anhydride can convert into acetic acid CH₃C(O)OH via the hydrolysis reaction. The calculated total rate constants over the temperature range 263–372?K are used to derive a negative activation energy (E_a= ?5.88 kJ/mol) and an pre-exponential factor (A?=?1.78×10^?12 cm³ molecule^?1 s^?1). The obtained Arrhenius parameters presented here are in strong agreement with the experimental values. Moreover, the temperature dependence of the total rate constant over a temperature range of 263?1000?K can be described by k?=?5.60 × 10^?14×(T/298?K)^3.4×exp(1725.7?K/T) cm³ molecule^?1 s^?1.     

Toward efficient interactions of bubbles and coal particles induced by stable cavitation bubbles under 600 kHz ultrasonic standing waves

The interactions of bubbles and coal particles in 600 kHz ultrasonic standing waves (USW) field has been investigated. A high-speed camera was employed to record the phenomena occurred under the USW treatment. The formation and behaviors of cavitation bubbles were analyzed. Under the driving of these cavitation bubbles, whose size is from several microns to dozens of microns, coal particles were aggregated and then attracted by large bubbles due to the acoustic radiation forces. The results of USW-assisted flotation show a significant improvement in recoveries at 600 kHz, which indicates that the interactions of bubbles and particles in the USW field are more efficient than that in the conventional gravitational field. Furthermore, the sound pressure distribution of the USW was measured and predicted by a hydrophone. The analysis of gravity and buoyancy, primary and secondary Bjerknes forces shows that bubble-laden particles can be attracted by the rising bubbles under large acoustic forces. This study highlights the potential for USW technology to achieve efficient bubble-particle interactions in flotation.     

Scaling properties of fracture surfaces on glass strengthened by ionic exchange

In this work the results of the statistical topometric analysis of fracture surfaces of soda-lime-silica glass with and without ionic exchange treatment are reported. In this case, the mechanism of substitution is K⁺-Na⁺. atomic force microscopy (AFM) was employed to record the topometric data from the fracture surface. The roughness exponent (ζ) and the correlation length (ξ) were calculated by the variable bandwidth method. The analysis for both glasses (subjected and non-subjected to ionic exchange) for ζ shows a value ∼0.8, this value agrees well with that reported in the literature for rapid crack propagation in a variety of materials. The correlation length shows different values for each condition. These results, along with those of microhardness indentations suggest that the self-affine correlation length is influenced by the complex interactions of the stress field of microcracks with that resulting from the collective behavior of the point defects introduced by the strengthening mechanism of ionic exchange.     

Wavelet Collocation Methods for a First Kind Boundary Integral Equation in Acoustic Scattering

In this paper we consider a wavelet algorithm for the piecewise constant collocation method applied to the boundary element solution of a first kind integral equation arising in acoustic scattering. The conventional stiffness matrix is transformed into the corresponding matrix with respect to wavelet bases, and it is approximated by a compressed matrix. Finally, the stiffness matrix is multiplied by diagonal preconditioners such that the resulting matrix of the system of linear equations is well conditioned and sparse. Using this matrix, the boundary integral equation can be solved effectively.     

Kinetics of phenol hydrogenation over supported palladium catalyst

Kinetics of vapor phase hydrogenation of phenol to cyclohexanone over Pd/MgO system has been studied in a flow microreactor under normal atmospheric pressure. The reaction rate is found to be negative order with respect to the partial pressure of phenol and has increased from −0.5 to 0.5 with increasing temperature (473 to 563 K). The apparent activation energy (E_a) of the process is found to be close to 65 kJ per mol. On the basis of kinetic results a surface mechanism is proposed.     

Surfaces of Constant Mean Curvature Bounded by Two Planar Curves

In this paper we study constant mean curvature compact surfaces with two Jordan curves in parallel planes as boundary and we investigate the point at which the surface inherits the symmetries of its boundary.