Magnetic phase transitions in nanostructures induced by shear stress under high pressure

Magnetic phase transitions of the first and second order were revealed by Mössbauer spectroscopy in nanosystems of - and -ferric oxides and metallic europium subjected to shear stress (240°) under high pressure (20 kbar). For - and -ferric oxide nanoclusters, the Curie (Neel) points decreased to 300 K, whereas for nanostructured europium the Neel point increased from 90 to 100 K. The thermodynamic model of magnetic phase transitions predicting a change in the character of magnetic phase transitions and a decrease (increase) in the critical Neel (Curie) points in nanoclusters was developed. The type of magnetic phase transitions and the change in the critical points were caused by defects in nanoclusters, whose maximum concentration was observed for the clusters with the 20—50 nm size range.     

An application of the modified Poisson- Boltzmann equation in studies of osmotic properties of micellar solutions

The spherical cell model of colloidal solutions is applied in calculations of the osmotic pressure of micellar systems. The predictions of the nonlinear Poisson-Boltzmann equation (MPB) and of the Modified Poisson-Boltzmann equation (MPB) containing the leading terms of the fluctuation potential and the exclusion volume corrections to the mean potential acting on simple ions are compared with the results of recent computer simulations. Both PB and MPB seem satisfactory for solutions with monovalent counterions while the MPB is preferable for studies of the solutions containing divalent countenons.On leave from the University of Ljubljana, Ljubljana, Yugoslavia     

Vapor pressure,speciation, and chemical activities in highly concentrated sodium borate solutions at 277 and 317°C

The system H₂O-B₂O₃-Na₂O has been studied experimentally at 277 and 317°C. The activities of water and boric acid have been determined at mole ratios Na/B from 0 to 1.5, and total dissolved solids 3 to 80 weight percent. The activity of boric acid has been fitted to within experimental error using a speciation model with eight complex species. This model is consistent with the model previously published by Mesmer et al. The electrolyte properties of the liquid are modeled using the Pitzer-Simonson model of very concentrated electrolyte solutions. The calculated values of water activity agree with experiment, and the activity of NaOH and pOH have also been calculated. The potassium borate system also was briefly studied at 317°C, and is adequately described by a model with five complex species. The potassium borate liquid is more alkaline at K/B= 1 than a sodium borate liquid at the same mole ratio, but pOH in the two systems is the same at lower mole ratios.     

Synthesis of macrocyclic tetraamides derived from α-amino acids and their investigations using ESI-MS technique

Chiral α,ω-diesters react under high-pressure conditions (10 kbar) with α,ω-diamines to give chiral cyclic tetraamides of C₂-symmetry. The complexation properties of tetraamides towards alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺) were estimated on the basis of ESI-MS spectra.     

表面膨胀粘度的测定研究

用不同浓度的NaCl和表面活性剂直链的十二烷基苯磺酸钠(LAS)、稳定剂聚丙烯酰胺和水所组成的泡沫体系为研究对象,通过表面压松弛的方法,利用计算机数据拟合,得到了计算表面膨胀粘度的方法。     

螯合树脂浓缩柱预富集低压离子色谱分光光度法测定海水中痕量铅

采用螯合树脂浓缩柱预富集低压离子色谱分光光度法测定海水中痕量的铅。对于2.0μg/L的Pb2 溶液,测定的相对标准偏差为2.9%(n=8);将该法应用于不同盐度海水中铅的测定,获得满意结果,标准加标回收率在94%~101%之间,该法可以识别Ⅰ类海水,可以测定Ⅱ~Ⅳ类海水。     

Solubility of α-amino acids in water under high pressure: glycine, -alanine, -valine, -leucine, and -isoleucine

The solubility of glycine, -alanine, -valine, -leucine, and -isoleucine in water was measured at 298.15 K and pressures up to 400 MPa. The standard deviation of the logarithm of the solubility is 0.001–0.003, equal to or better than the accuracy of atmospheric pressure measurement in the literature (0.001–0.05). A variety of solubility phenomena were observed. The solubility of glycine decreased with increasing pressure, whereas that of -alanine increased. The -valine and -isoleucine have a solubility maximum at around 100 MPa, and -leucine seems to exhibit a solid-phase phase transition at around 200 MPa. Pressure coefficient of the solubilities at 0.10 MPa is compared with that thermodynamically estimated in reference to aqueous density measurements of glycine and -alanine at 298.15 K and 0.10 MPa, supporting a reliability of our high-pressure measurements.     

Rapid and sensitive liquid chromatography-tandem mass spectrometry for the quantitation of epirubicin and identification of metabolites in biological samples

A highly sensitive and selective liquid chromatography-mass spectrometry (LC-MS) method has been developed for the determination of epirubicin in serum and cell specimens using daunorubicin as an internal standard. Using atmospheric pressure chemical ionisation (APCI), the epirubicin metabolites were readily distinguishable by their fragmentation pattern in the mass spectrometer. Selected reaction monitoring (SRM) mode was employed for quantitation of epirubicin and the metabolites. Following extraction, chromatography was performed on a C18 column with a mobile phase consisting of water-acetonitrile-formic acid, pH 3.2, with a flow rate of 200 μl/min. The limit of detection (LOD) and the limit of quantitation (LOQ) of this method in serum were determined to be 1.0 and 2.5 ng/ml, respectively. Linearity of the method was verified over the concentration range of 2.5-2000 ng/ml, with a high correlation coefficient (R² ≥ 0.998). For the extraction procedure, an aliquot of 500 μl serum, spiked with internal standard, was extracted using a chloroform-2-isopropanol (2:1, v/v) mixture. The method has been applied to the analysis of epirubicin in cancer cell samples and the identification of known and unknown metabolites in clinical trial patient serum samples.     

Solubility of gases in liquids. 18. High-precision determination of Henry fugacities for argon in liquid water at 2 to 40°C

The solubility of argon in pure liquid water was measured at ca. 100 kPa and from 2 to 40°C using an analytical method characterized by an imprecision of about ±0.05%. From the experimental results, Henry fugacities H _2,1 (T,P _s,1 ) (also known as Henry's Law constants or Henry coefficients) at the vapor pressure P _s,1 of water as well as Ostwald coefficients L _2,1 at infinite dilution were obtained. Measurements were made at roughly 0.5°C and/or 1° intervals between 2 and 8°C (region I), and at 5°C intervals above 10°C (region II). A difference plot lnH _2,1 /T suggests an unusual temperature dependence in region I, i.e., between 2 and 8°C. Because of this, the data were treated separately in two parts corresponding to these two regions. Our results are compared with the recent high-precision data of Krause and Benson (Henry fugacities), and with calorimetrically determined quantities (enthalpies and heat capacities of solution). Finally, experimental results are compared with values calculated via scaled particle theory.Communicated in part at the 2^nd International Symposium on Solubility Phenomena in Newark, New Jersey, August 12–15, 1986, and at the 4^th ISSP in Troy, New York, July 20–August 3, 1990.     

Ab Initio High Pressure Investigations of InI

The high pressure behaviour of InI is studied by DFT‐calculations and compared with experimental data. The existence of a 5s² electron pair in In⁺ represents an unfavourable bonding situation for high symmetry structures because of effective closed shell repulsion. Since cations with a ns² electron pair are highly polarizable and the electronic situation is more favourable in the low symmetry structure InI prefers a TlI‐type structure at ambient pressure. A pressure induced transition to the more densely packed high symmetry CsCl‐type structure takes place at about 19 GPa according to our calculations. At ambient pressure the interactions are predominantly ionic. However with increasing pressure the distances between In⁺ cations in the TlI‐type structure diminish drastically, mainly due to the changing space requirement of the lone electron pair. Apart from ionic interactions further bonding interactions between the In⁺ cations occur. At elevated pressure the electron localization function (ELF) as well as the band structure diagrams suggest metallic bonding between the In⁺ within the zigzag chain, i. e. increasing bonding interactions between the In⁺ cations due to the electron pair and its s‐p‐mixing. At ambient pressure In‐In interactions are rather weak and the space requirement of the lone electron pair mainly determines the characteristic arrangement of the ions. At elevated pressure the In‐In interactions become stronger and stabilise themselves additionally the specific structural arrangement.