Interconversion behavior of the C-H bond in the CH4+ radical cation: ab initio molecular dynamics study

Thermal motion of CH4+ is investigated by performing an ab initio molecular dynamics method with the second-order M?ller-Plesset (MP2)/6-311G** force field. In the trajectories obtained at 400 K, we have observed rapid interconversion behavior of the geometrical parameters of CH4+ with the frequency of 0.6/ps, where the C-H pair forming the small angle around 55 degrees is switched to another pair on subpicosecond time scale. The switching patterns are found to be classified into the following two types. Type 1: one C-H of the small angled C-H pair is switched to one C-H of the other C-H pair. Type 2: the small angled C-H pair is switched to the other C-H pair, which has been newly observed in the present ab initio MD calculation. The four C-H bonds of CH4+ are characterized by the long and short C-H bonds in a time region of the trajectories, and also for the time-evolution of C-H bonds such interconversion behavior is observed. The switching patterns of the geometrical parameters are compared with those in the interconversion scheme between six equivalent C2v symmetry structures of CH4+ [Paddon-Row, M. N. et al., J Am Chem Soc 1985, 107, 7696]. We have also investigated the electronic energy fluctuation due to thermal motion of CH4+. The standard deviation of total electronic energy at 400 K is evaluated to be 1.2 kcal/mol.     

Thermodynamics of liquid Fe-Si and Fe-Ge alloys

The enthalpies of mixing of liquid binary Fe-Ge (1765±5 K) and Fe-Si (1750±5 K) alloys were determined using a high-temperature isoperibolic calorimeter. The thermodynamic properties of Fe-Ge melts were also studied by electromotive force method in the temperature range of 1250-1580 K. The comparison of our measurement results with literature data has been performed. The extreme negative values of integral enthalpy of mixing and alternating-sign deviations from Raoult's low for germanium can be explained by the influence of binary clusters formation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Radical addition reactions: factors determining the transition-state geometry

Interatomic distances in the reaction centers of the addition reactions of (i) H^· to the C=C, C=O, N≡C, and C≡C bonds, (ii) ^·CH₃ radical to the C=C, C=O, and C≡C bonds, and (iii) alkyl, aminyl, and alkoxyl radicals to olefin C=C bonds were determined using a new semiempirical method for calculating transition-state geometries of radical reactions. For all reactions of the type X^· + Y=Z → X— Y—Z^· the r ^# _X...Y distance in the transition state is a linear function of the enthalpy of reaction. Parameters of this dependence were determined for seventeen classes of radical addition reactions. The bond elongation, Δr ^# _X...Y, in the transition state decreases as the triplet repulsion, electronegativity difference between the atoms X and Y in the reaction center, and the force constant of the attacked multiple bond increase. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 894–902, April, 2005.     

Methodology for the calculation of the potential of mean force for a cation-pi complex in water.

We report potential of mean force (PMF) calculations on the interaction between the p-sulfonatocalix[4]arene and a monovalent cation (Cs(+)). It has been recently shown from microcalorimetry and (133)Cs NMR experiments that the association with Cs(+) is governed by favourable cation-pi interactions and is characterized by the insertion of the cation into the cavity of the macrocycle. We show that the PMF calculation based upon a classical model is not able to reproduce both the thermodynamic properties of association and the insertion of the cation. In order to take into account the different contributions of the cation-pi interactions, we develop a new methodology consisting of changing the standard PMF by an additional contribution resulting from quantum calculations. The calculated thermodynamic properties of association are thus in line with the microcalorimetry and (133)Cs NMR experiments and the structure of the complex at the Gibbs free-energy minimum shows the insertion of the cation into the cavity of the calixarene.     

Energy Landscape of Aptamer/Protein Complexes Studied by Single‐Molecule Force Spectroscopy

Aptamers are single‐stranded nucleic acid molecules selected in vitro to bind to a variety of target molecules. Aptamers bound to proteins are emerging as a new class of molecules that rival commonly used antibodies in both therapeutic and diagnostic applications. With the increasing application of aptamers as molecular probes for protein recognition, it is important to understand the molecular mechanism of aptamer–protein interaction. Recently, we developed a method of using atomic force microscopy (AFM) to study the single‐molecule rupture force of aptamer/protein complexes. In this work, we investigate further the unbinding dynamics of aptamer/protein complexes and their dissociation‐energy landscape by AFM. The dependence of single‐molecule force on the AFM loading rate was plotted for three aptamer/protein complexes and their dissociation rate constants, and other parameters characterizing their dissociation pathways were obtained. Furthermore, the single‐molecule force spectra of three aptamer/protein complexes were compared to those of the corresponding antibody/protein complexes in the same loading‐rate range. The results revealed two activation barriers and one intermediate state in the unbinding process of aptamer/protein complexes, which is different from the energy landscape of antibody/protein complexes. The results provide new information for the study of aptamer–protein interaction at the molecular level.     

A revised quantum chemistry-based potential for poly(ethylene oxide) and its oligomers in aqueous solution

We have conducted a high-level quantum chemistry study of the interactions of 1,2-dimethoxyethane (DME) with water for complexes representing both hydrophilic and hydrophobic hydration. It was found that our previous quantum chemistry-based force field for poly(ethylene oxide) (PEO) and its oligomers in aqueous solution did a poor job in describing the hydrophobic binding of water to the ether, consistent with our recent calculations of the excess free energy and entropy of hydration of DME. Our original force field was revised to more accurately reproduce the interaction of water with the carboneous portions of DME. Molecular dynamics simulations of aqueous DME solutions using the revised quantum chemistry-based potential yielded good agreement with experiment for excess free energy, enthalpy, and volume as well as excess solution viscosity and the self-diffusion of water. Comparison with our original potential revealed that the relatively hydrophobic ether-water interactions in the new potential strongly reduced the favorable excess free energy and enthalpy but have relatively little influence on the excess entropy for dilute DME solutions. Other properties of DME and PEO solutions including conformational populations and dynamics, solution viscosity, hydrogen bonding, water translational and rotational diffusion and neutron structure factor as a function of solution composition were found to be largely unchanged from those obtained using the original potential.     

分子力场进展

分子力学（简称ＭＭ）是近年来化学家常用的一种计算方法。与量子力学从头计算和半经验方法相比，用分子力学处理大分子可以大大节省计算时间，而且，在大多数情况下，用分子力学方法计算得到的分子几何构型参数与实验值之间的差值可在实验误差范围之内。所以，分子力学是研究生物化学体系的有效和可行的手段。分子力学的核心是分子力场。本文介绍了分子力场的量子力学背景、分子力场和光谱力场之间的关系。分子力场的一般形式、分力     

Analogy in adsorption behavior of homopolyelectrolyte mixtures as compared to analogous diblock polyampholytes

The adsorption behavior of aqueous mixtures of the homopolyelectrolytes poly(methacrylic acid) (PMAA) and poly[(dimethylamino)ethyl methacrylate] (PDMAEMA) was investigated in comparison with the adsorption of the ampholytic diblock copolymer PMAA‐b‐PDMAEMA on silicon substrates. Ellipsometry was used to determine the amount of adsorbed homopolyelectrolyte and diblock polyampholyte. Furthermore, the topography of the adsorbed polymers was investigated with atomic force microscopy (AFM) and compared with the structures observed in aqueous solutions by dynamic light scattering (DLS). For all types of investigated polyelectrolytic mixtures or the single polyampholyte, the adsorption was strongly influenced by the pH of the polymer solution. Although single homopolyelectrolytes showed only one maximum in adsorption according to their charge, the mixtures made from these homopolyelectrolytes showed two or three maxima. The third maximum near the isoelectric point of the mixture was assigned to a new species formed by aggregation of the two homopolyelectrolytes. Altogether, the adsorption behavior of the polyelectrolytic mixtures was in between the behavior of the pure homopolyelectrolytes and the analogous polyampholytes and therefore understandable from both of these polymer species. © 2002 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 338–345, 2002; DOI 10.1002/polb.10091     

TiO2纳米膜表面结构形态特征

采用反胶束法制备TiO2纳米溶胶,用浸渍提拉法在不同的条件下制备了三种TiO2多孔纳米薄膜,并利用AFM、SEM、XRD等方法对膜表面结构物理化学特性进行表征.结果表明三种膜基本上由粒径约为59 nm的纳米粒子以不同的方式堆积而成,溶胶刚生成时浸提一次,干燥、焙烧得到膜上纳米粒子分布均匀,所生成的二次粒子粒径最小,二次粒子形成的二次表面粗糙度最小,浸提10次得到膜上纳米粒子间存在较丰富缝隙结构,二次粒子粒径及其形成的表面粗糙度较大,而溶胶制备好陈化6 h后浸提得到的膜上二次粒子粒径最大,表面粗糙度最高.由分形理论估算得到三种膜的分形维数分别是2.22、2.20和2.27. XRD测试表明,膜上TiO2为锐钛矿晶相.这些结果表明,采用不同制备步骤得到的膜,其表面结构形态存在较大的差异.