Synthesis of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) by the competitive single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization in water

The synthesis of a block copolymer poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) is reported. This new material was synthesized by single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization (SET‐DTLRP) in two steps. First, a bifunctional macroinitiator of α,ω‐di(iodo)poly (butyl acrylate) [α,ω‐di(iodo)PBA] was synthesized by SET‐DTLRP in water at 25 °C. The macroinitiator was further reinitiated by SET‐DTLRP, leading to the formation of the desired product. This ABA block copolymer was synthesized with high initiator efficiency. The kinetics of the copolymerization reaction was studied for two PBA macroinitiators with number–average molecular weight of 10 k and 20 k. The relationship between the conversion and the number–average molecular weight was found to be linear. The dynamic mechanical thermal analysis suggests just one phase, indicating that copolymer behaves as a single material with no phase separation. This methodology provides the access to several block copolymers and other complex architectures that result from combinations of thermoplastics (PVC) and elastomers (PBA). From industrial standpoint, this process is attractive, because of easy experimental setup and the environmental friendly reaction medium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3001–3008, 2006     

Structural properties of charged diblock copolymer solutions

Aqueous micellar solutions of ionic/neutral block copolymers have been studied by light scattering, small angle neutron scattering and small angle X-ray scattering. We made use of a polymer comprised of a short hydrophobic block (polyethylene-propylene) PEP and of a long polyelectrolytic block (polystyrene-sulfonate) PSSNa which has been shown previously to micellize in water. The apparent polydispersity of these micelles is studied in detail, showing the existence of a few large aggregates coexisting with the population of micelles. Solutions of micelles are found to order above some threshold in polymer concentration. The order is liquid-like, as demonstrated by the evolution with concentration of the peak observed in the structure factor (), and the degree of order is found to be identical over a large range of concentrations (up to 20 wt%). Consistent values of the aggregation number of the micelles are found by independent methods. The effect of salt addition on the order is found to be weak. Received: 19 June 1997 / Received in final form: 4 September 1997 / Accepted: 9 October 1997     

Stochastic flows on a countable set: Convergence in distribution

Consider a sequenceF ₁,F ₂,... of i.i.d. random transformations from a countable setV toV. Such a sequence describes a discrete-time stochastic flow onV, in which the position at timen of a particle that started at sitex isM _n(x), whereM _n =F _n F _n–1 F ₁. We give conditions on the law ofF ₁ for the sequence (M _n) to be tight, and describe the possible limiting law. an example called the block charge model is introduced. The results can be formulated as a statement about the convergence in distribution of products of infinite-dimensional random stochastic matrices. In practical terms, they describe the possible equilibria for random motions of systems of particles on a countable set, without births or deaths, where each site may be occupied by any number of particles, and all particles at a particular site move together.     

Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

Calorimetric approach to tetronic/water interactions

Tetronic^®comprises X-shaped copolymers formed by four poly(propylene oxide) (PPO) andpoly(ethylene oxide) (PEO) block chains bonded to an ethylene diamine centralgroup. Micellization behaviour of three representative Tetronics (T304, T904and T1307) was characterized to gain an insight into the interactions betweenthe copolymer unimers and the state of water in their solutions. The enthalpyof demicellization, recorded at 37°C in an isoperibol microcalorimeter,indicated that the process was in all cases exothermic and the enthalpy rankedin the order T1307≥T904>>T304. Micellization is entropy-driven owing tohydrophobic interactions between the PPO chains.DSC analysisshowed that the crystallization and melting peaks of the free water remainingin T304 and T904 solutions were progressively shifted toward lower temperaturesas the surfactant proportion increased, owing to a colligative effect. Boundwater corresponded to 3 water molecules per EO repeating unit. In the caseof T1307, which has longer PEO chains, a splitting of the melting peak wasobserved, one peak appearing around 0°C due to free water and anotherat –15°C due to interfacial water. As T1307 proportion raised, theenthalpy of the former decreased, whilst the enthalpy of the latter increased.In 40% T1307 solutions, interfacial water overcame the proportion of freewater; there being 1 interfacial and 3 bound water molecules per EO repeatingunit. Gaussian deconvolution of FTIR spectra also enabled to characterizethe evolution of free water as a function of Tetronic proportion. The dependenceof micellization and water interaction behaviour on Tetronics structure shouldbe taken into account to use these copolymers as drug solubilizers and micellarcarriers.     

Paleomagnetic Results of Later Paleozolic Rocks From Alashan Area of Western North China Block

In order to contribute to the Apparent Polar Wander Path (APWP) of the North China Block (NCB) , we collected paleomagnetic samples of Late Paleozoic rocks from the northern and southern margins of the Alashan (Alxa) terrane (the western part of Inner Mongolia and northern parts of Gansu and Ningxia Provinces) and adjacent regions. Laboratory work revealed different types of demagnetization behavior and isolated a higher temperature characteristic component in most of the samples. Results of IRM experiments show high thermal stability and high coercivities for the magnetic carriers in these rocks. The characteristic component passed the fold and/or reversal tests, suggesting that the characteristic components were probably primary. On the basis of comparing the paleomagnetic results with the geologic evidence, we discuss the tectonic implications. In the Late Paleozoic, the Alashan region had been part of the NCB and was not connected with the northern and southern blocks. During the Carboniferous Alash     

Synthesis of an Anti-1,3-Diol Type Chiral Building Block

Duringthelastdecade,1,3-dioltypechiralbuildingbIocksofvariousconfigurationshavebeensynthesizedandappliedwidelyinthetotalsynthesisofnaturalpolyenemacrolideantibiotics1'2andla,25-dihydroxyvitaminD3analogues'.RecentlyWeigandandBrucker4synthesizedachiralbuildingblock(4R,6R)-2,2-dimethyl-5-tert-butyldip4-hydroxymethyl-l,3-dioxane1inlOsteps.Herein,wereportasyntheticrouteofnewbuildingblock(4S,6S)-2,2-dimethyl-5-tert-butyldip2,anenantiomerofl,startingfromreadilyavailableandinexpensiveD( )-xylose3i…     

Surface forces in foam films from ABA block copolymer: a dynamic method study

The thinning of foam films from aqueous solutions of an ABA triblock copolymer of polyethylene oxide and polypropylene oxide (average molecular weight 14,000 g/mol) is studied experimentally. The dependence of the surface forces on film thickness is obtained by the dynamic method of Scheludko and Exerowa.The total surface force measured in foam films (radius 60–70 m) from 10^–5 M (0.014 wt%) polymer solution with 0.1 M NaCl is positive at thicknesses from about 800 down to 460 . The electrostatic repulsion is negligible while the contribution of van der Waals attraction is small (within 15%). Therefore a positive surface force component predominates. Most probably it arises from steric interactions between the hydrophilic polyethylene oxide tails of the polymer. The dynamic method appears to be a suitable technique for exploring the stabilization of foam films from ABA copolymers.