ANISOTROPIC STRAIN EFFECT ON MORPHOLOGY AND ATOMIC STRUCTURE OF VICINAL Si(001) SURFACE

On vicinal Si(001) surfaces, dependence of growth morphology on the applied strain direction and formation of vacancy lines from Ag-induced missing dimer vacancies are studied. Both phenomena are intimately related to the anisotropic nature of the strain field which originates from the surface dimerization. Strain relief mechanism, reflecting on the surface morphology, is shown to be different in two orthogonal directions. Normal to the steps, step-pair bunching and waving lead to formation of hillocks and pits. Along the step direction, bending of step pairs forms a cusp which later develops into a deep groove. Toward the atomic scale, the formation of the vacancy lines is driven by the short-range attractive interaction between the vacancies in adjacent dimer rows and the long-range repulsive interaction between them in the same dimer row. A full form and magnitudes of the interactions are derived from the thermally-excited wandering of the vacancy lines formed by a nominal amount of Ag depositing onto the surface.     

超临界流体萃取-胶束电动毛细管色谱法分离测定大黄中蒽醌类组分的含量

采用ＳＴＥ－ＭＥＣＣ法分离测定大黄中的芦荟大黄素，大黄素和大黄酸。萃取条件为压 力４１．４ＭＰａ，温度５０℃，改性剂量０．４ｍＬ。被测组分在１０ｍｉｎ得到全部分离。本法准确、简 便、快速、结果令人满意。     

Study of Tea Digitized Chromatographic Fingerprint Spectra Using Micellar Electrokinetic Chromatography

IntroductionTeaisthemostwidelyconsumedbeverageinpeople’slife .Theheightenedpopularityofthisbeveragethroughouttheworldinrecentyearsmaybedueinparttotheevidenceofarelationshipbetweenteaconsumptionandpreventionofcertainformsofhumandisease .Themaincomponentsofteaarepolyphenoliccompounds ,commonlyknownascatechins ,whichrepresentagroupofcom poundsbelongingtotheflavonoidfamily .Thesecom poundsarewidelydistributedinthetealeavesandconsti tuteupto 30 %ofthedryleafweight.1Muchinteresthasbeenfocusedoncat…     

Matrix effects and selectivity issues in LC-MS-MS

Summary Chlorobenzenes, triazine and phenylurea herbicides were separated by normal micellar electrokinetic chromatography (MEKC) and by micellar electrokinetic chromatography with reversed flow (RF-MEKC) in running buffers containing organic solvents. The relationship between the two techniques is similar to that between reversed-phase and normal-phase HPLC. Using RF-MEKC, the separation of lipophilic compounds is often improved compared to normal MEKC. The migration in MEKC and in RF-MEKC was characterised by lipophilic and polar indices. The experimental values of the lipophilic indices of the compounds tested in the two techniques were close to the indices in reversed-phase HPLC (RP-HPLC). This enables the use of the indices determined in RP-HPLC for predicting the effects of changing composition of the running buffers on migration times in MEKC and in RF-MEKC. Presented at Balaton Symposium '01 on High-Performance Separation Methods, siófok, Hungary, September 2–4, 2001     

The interaction of double-charged metal ions with monolayers and bilayers of phospholipids

Electrophoretic mobilities of hexadecane/water emulsions containing dimyristoyl-phosphatidylcholine (DMPC) or egg yolk lecithin (EYL) monolayers at the interface and those of liposomes prepared from the same lipids were measured as functions of the concentrations of Ca²⁺, Mn²⁺, Cu²⁺, and Ni²⁺ cations in the aqueous phase. The surface potentials, surface charge densities (σ), and the Langmuir adsorption isotherms for various distances from the charged surface to the slip plane (d) were calculated on the basis of the Gouy-Chapman theory for 1∶2 electrolytes and the values of ζ-potentials. The binding constants (K) and parametersd were determined under the assumption that the maximum σ values correspond to one ion per phospholipid molecule at the interface. In the case of DMPC, the ion binding constants (L mol⁻¹) at 25°C are 230 and 87 for Ca²⁺, 31.5 and 21 for Mn²⁺, 11 and 6 for Cu²⁺, and 7.5 and 5.3 for Ni²⁺ in liposomes and emulsions, respectively. The affinities of Cu²⁺ and Ni²⁺ ions for EYL monolayers and bilayers are lower than those for DMPC mono- and bilayers. Thed parameters for all ions are smaller than the radii of the hydrated ions. In the case of Ca²⁺, Cu²⁺, and Ni²⁺, thed values for mono- and bilayers are different. The differences in K values between monolayers and bilayers as well as those between DMPC and EYL mono- and bilayers can be attributed to the differences in the local environment and orientation of the interfacial phosphate groups in these systems. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2490–2495, December, 1998.     

Organically modified sols as pseudostationary phases for microchip electrophoresis

We demonstrate that the selectivity of microchip electrophoresis separations is greatly improved by the presence of organically modified silica (Ormosil) sols in the run buffer. A negatively-charged N-(trimethoxysilylpropyl)ethylenediamine triacetic-acid (TETT)-based sol is used for improving the selectivity between nitroaromatic explosives and a methyltrimethoxysilane (MTMOS)-based sol is employed for enhancing the microchip separation of environmental pollutants, aminophenols. These sols are added to the run buffer and act as pseudostationary phases. Their presence in the run buffer changes the apparent mobility of studied solutes, and leads to a higher resolution. The observed mobilities changes reflect the interactions between the Ormosil sols and the solutes. Relevant experimental variables have been characterized and optimized. The diverse chemistry of Ormosil sols should be extremely useful for tailoring the selectivity of a wide range of electrophoresis microchip separations.     

Low-temperature bath/coupled-capillary/sweeping-micellar electrokinetic capillary chromatography for the separation of naphthalene-2,3-dicarboxaldehyde-derivatized dopamine and norepinephrine

The use of a low-temperature (0 degrees C) bath-assisted coupled capillary for the separation of naphthalene-2,3-dicarboxaldehyde (NDA)-derivatized dopamine and norepinephrine using the sweeping-micellar electrokinetic capillary chromatography (MEKC) mode is described. In this technique, a capillary consisting of two portions with different inside diameters is used. Therefore, the field strength inside the capillary is different. Hence, the electrophoretic migration velocities of the analytes and the electro-osmotic flow (EOF) also are different. Furthermore, when a portion of the capillary (wide portion, used for sweeping) is immersed in a low-temperature bath, the viscosity of the buffer and the retention factor of the analytes inside are increased. Thus, not only are the interactions between the SDS micelles and the analytes increased, but the SDS-analytes also move more slowly. As a result, a more complete separation can be achieved, even when the sample injection volume is large, up to approximately 2 microL. In general, when the volume of an injected sample is larger, the effects of sweeping and separation would become insufficient, especially when the retention values (k) of the analytes are quite different. However, this limitation can be improved when the low-temperature bath/coupled capillary/sweeping-MEKC mode is used.     

Electroosmosis through a Cation-Exchange Membrane: Effect of an ac Perturbation on the Electroosmotic Flow

Electroosmosis experiments through a cation-exchange membrane have been performed using NaCl solutions in different experimental situations. The influence of an alternating (ac) sinusoidal perturbation, of known angular frequency and small amplitude, superimposed to the usual applied continuous (dc) signal on the electroosmotic flow has been studied. The experimental results show that the presence of the ac perturbation affects the electroosmotic flow value, depending on the frequency of the ac signal and on the solution stirring conditions. In the frequency range studied, two regions have been observed where the electroosmotic flow reaches a maximum value: one at low frequencies (Hz); and another at frequencies of the order of kHz. These regions could be related to membrane relaxation phenomena.     

SYNTHESIS OF CROSS-CONJUGATED （p-PHENYLENE）S-POLY（p- PHENYLENEVINYLENE）S HYBRIDS WITH LOW CONTENT OF STRUCTURAL DEFECTS

The novel shish-kebab-type liquid crystalline cross-conjugated （p-phenylene）s-poly（p-phenylenevinylene）s hybrid was synthesized through Gilch polymerization. Their structures and properties were characterized by NMR, GPC, DSC, X-ray diffraction and polarizing optical microscope （POM）. ^1H-NMR investigation of the polymers indicates that the shish-kebab-structure has a strong ability to suppress the structural defects in the polymers. The polymers are enantiotropic liquid crystals. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The mesophase was identified by X-ray diffraction method. They showed not only a smectic LC phase, but also a strong green fluorescence in chloroform. The maximum absorption band of the ＂kebabs＂ of the two, 5-bis（4＇- alkoxyphenyl）benzene at 280 nm did not appear in absorption spectra of the polymers. The same phenomena were also observed in the fluorescence spectra. These results imply that the polymers have formed a cross-conjugated uniform structure and achieved an extended n-conjugation polymer.     

Optimization strategies in micellar electrokinetic capillary chromatography

Summary Computer-assisted procedures for the one-parameter optimization of the surfactant concentration and the concentration of urea or D-glucose as modifiers in micellar electrokinetic capillary chromatography have been developed. These procedures permit a rapid optimization of one parameter on the basis of only two experiments. Predicted values are compared to empirically obtained optimum values. The influence of the modifier concentration on the critical micelle concentration of sodium dodecyl sulfate was experimentally determined in buffers commonly employed in micellar electrokinetic chromatography. The alteration of retention factors of solutes caused by the influence of urea addition on the critical micelle concentration of sodium dodecyl sulfate was calculated under the assumption of constant distribution coefficients and compared to experimentally obtained values. It was demonstrated that the addition of urea or of D-glucose does not alter the phase ratio substantially.