Synthesis and properties of organosoluble poly(amide imide imide)s based on tetraimide dicarboxylic acid condensed from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline,and trimellitic anhydride and various aromatic diamines

A novel tetraimide dicarboxylic acid was synthesized with the ring‐opening addition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline, and trimellitic anhydride in a 1/2/2 molar ratio in N‐methyl‐2‐pyrrolidone followed by azeotropic condensation to tetraimide dicarboxylic acid. A series of poly(amide imide imide)s (PAIIs) with inherent viscosities of 0.8–1.1 dL/g were prepared from tetraimide dicarboxylic acid with various aromatic diamines by direct polycondensation. Most of the PAIIs were readily soluble in a variety of amide polar solvents and even in less polar m‐cresol and pyridine. Solvent‐cast films had tensile strengths ranging from 99 to 106 MPa, elongations at break ranging from 8 to 13%, and initial moduli ranging from 2.0 to 2.3 GPa. The glass‐transition temperatures of these PAIIs were recorded at 244–276 °C. They had 10% weight losses at temperatures above 520 °C in air or nitrogen atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1092–1102, 2002     

Palladium‐Catalyzed Direct Cross‐Coupling of Carboranyllithium with (Hetero)Aryl Halides

A palladium‐catalyzed direct C‐arylation reaction of readily available cage carboranyllithium reagents with aryl halides has been developed for the first time. This method is applicable to a wide range of aryl halide substrates including aryl iodides, aryl bromides, and heteroaromatic halides.     

Light intensity and image visualization of GDI injector sprays according to nozzle hole arrangements

The light intensity measurement and image visualization of multi-hole injection spray due to different hole arrangements and hole numbers were investigated. The light intensities and behavior characteristics of the GDI spray were analyzed through the axial and diagonal spray penetration, cone angle, and spray area from the spray images by using the image visualization system and image analysis system. The atomization performance of GDI injectors was analyzed by the local and overall Sauter mean diameter (SMD) measurement.     

Propagation of a pre-existing turbulent fluid fracture

The propagation of rough and smooth wall pre-existing turbulent fluid fractures is investigated. The laminar fluid fracture is included as a special case for comparison. Lubrication theory is assumed to apply in the fracture and turbulence is introduced through the wall shear stress. The Perkins–Kern–Nordgren approximation is made in which the fluid pressure is proportional to the half-width of the fracture. The fracture half-width satisfies a non-linear diffusion equation. By using a linear combination of the Lie point symmetries of the non-linear diffusion equation a group invariant solution for the fracture length, volume and half-width is derived. The evolution of the length, half-width and mean flow velocity is analysed for a range of working conditions at the fracture entry. It is found that the mean flow velocity increases approximately linearly along the fracture.     

Shear and extensional rheology of entangled polymer melts: Similarities and differences

This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities have recently been identified for both step strain and startup continuous deformation, including elastic yielding, i.e., chain disentanglement after cessation of shear or extension, and emergence of a yield point during startup deformation that involves a deformation rate in excess of the dominant molecular relaxation rate. At a sufficiently high constant Hencky rate, uniaxial extension of an entangled melt is known to produce window-glass-like rupture. The present study provides evidence against the speculation that chain entanglements tie up into "dead knots" in constant-rate extension because of the exponentially growing chain stretching with time. In particular, it is shown that even Instron-style tensile stretching, i.e., extending a specimen by applying a constant velocity on both ends, results in rupture. Yet, in the same rate range, the same entangled melt only yields in simple shear, and the resulting shear banding is clearly not a characteristic of rupture. Thus, we conclude that chain entanglements respond to simple shear in the manner of yielding whereas uniaxial extension is rather effective in causing some entanglements to lock up, making it impossible for the entanglement network to yield at high rates.     

Contribution à l'étude Électrochimique de Dérivés de l'Acide Mercapto-2 Pyridinecarboxylique-5. II

Abstract

Electrochemical caracteristics of 2-mercaptopyridine-5-carboxylic acid and its methylic ester have been determined using recent polarographic techniques. Measurements have been carried out as a function of parameters such as frequency, others surimposed signals and as a function of concentration and pH. Results are compared to those obtained for selectively methylated on sulfur or nitrogen atoms derivatives. Interpretations of the data are given. The optimal conditions for a quantitative determination by D.C. and differential pulse polarography are fixed.     

Issue Information

An integrated finite element method (FEM) is proposed to simulate incompressible two‐phase flows with surface tension effects, and three different surface tension models are applied to the FEM to investigate spurious currents and temporal stability. A Q2Q1 element is adopted to solve the continuity and Navier–Stokes equations and a Q2‐iso‐Q1 to solve the level set equation. The integrated FEM solves pressure and velocity simultaneously in a strongly coupled manner; the level set function is reinitialized by adopting a direct approach using interfacial geometry information instead of solving a conventional hyperbolic‐type equation. In addition, a consistent continuum surface force (consistent CSF) model is utilized by employing the same basis function for both surface tension and pressure variables to damp out spurious currents and to estimate the accurate pressure distribution. The model is further represented as a semi‐implicit manner to improve temporal stability with an increased time step. In order to verify the accuracy and robustness of the code, the present method is applied to a few benchmark problems of the static bubble and rising bubble with large density and viscosity ratios. The Q2Q1‐integrated FEM coupled with the semi‐implicit consistent CSF demonstrates the significantly reduced spurious currents and improved temporal stability. The numerical results are in good qualitative and quantitative agreements with those of the existing studies. Copyright © 2015 John Wiley & Sons, Ltd.     

An Investigation into the Migration of Segments in Crosslinked Fluorinated Polyimide Adhesive

Crosslinked fluorinated polyimides (CFPI) were successfully synthesized to study and explore the effect of cross-linkage on the migration of fluorinated segments and on the adhesion strength. Characterization by dynamic thermomechanical analysis (DMA) and thermo gravimetric analysis (TGA) confirmed good thermal properties of CFPI. X-ray photoelectron spectroscopy (XPS) results showed that the ratio of fluorinated component (6FDA-ODA) concentration of the surface to the bulk decreased with the crosslink density. The water contact angle of CFPI was lower than that of non-crosslinked fluorinated polyimide, indicating that the migration of fluorinated groups to the surface was reduced by the presence of cross-linkage. Therefore, CFPI, with no fluorine segregation on the surface, exhibited excellent wetting of adherent surfaces and adhesion strength, which was proved by lap shear strength (LSS) measurements and scanning electron microscopy.     

The extended Hulburt–Hirschfelder‐long‐range oscillator model for direct‐potential‐fit analysis

In the present work, an extended Hulburt–Hirschfelder oscillator model is proposed as a means of simplifying potential energy functions for direct‐potential‐fit analyses. The new potential energy function is joined smoothly to the long‐range inverse‐power dispersion energy expression. The new model is employed in direct‐potential‐fits using spectroscopic line positions that involve the ground electronic states of the principal isotopologues of hydrogen iodide and carbon monoxide, and the ground and first singlet‐sigma excited states of hydrogen fluoride and hydrogen chloride. The present methodology is found to lead to compact, flexible, and robust representations for the potential energy that compare favorably with the results of past work where more complicated models were employed.