电介质的频域特性与测量

从物质的分子结构基本模型出发，简要介绍了介电频域理论，提出了有关新的测量方法。     

溶胶-凝胶法制备纳米多孔SiO2薄膜

以正硅酸乙酯(TEOS)为原料，采用旋转涂敷的方法，结合溶胶-凝胶技术在硅衬底上制备超低介电常数多孔SiO₂薄膜.采用两种不同的改性方法对薄膜表面进行改性，傅里 叶变换红外光谱分析发现改性后薄膜中含有大量的—CH₃键，从而减少了孔洞塌陷.用扫 描电子显微镜观察薄膜的表面形貌，发现薄膜内孔洞尺寸在70—80 nm之间.调节溶胶pH值，发现pH值越小凝胶时间越长.对改性样品热处理的结果表明，在300 ℃时介电常数最低达2.05. 关键词： 2')" href="#">多孔SiO₂ 低介电常数 溶胶-凝胶     

介质光波导的数值计算及近似方法

综述介质光波导中模式分析方法的最新进展。着重分析严格的数值分析方法及近似方法最近的研究进展。依据方法的计算精确度、计算效率和计算复杂度等因素．对有限元法和有限差分法这两种数值分析方法以及有效指数法和频谱指数法等近似方法进行讨论。论述磁光波导的分析方法。     

Strong‐Coupling Theory for a Polarizable Planar Colloid

We propose a strong‐coupling analysis of a polarizable planar interface, in the spirit of a recently introduced Wigner‐Crystal formulation. The system is made up of two moieties: a semi‐infinite medium (z < 0) with permittivity ε ′ while the other half space in z > 0 is occupied by a solution with permittivity ε, and mobile counter‐ions (no added electrolyte). The interface at z = 0 bears a uniform surface charge. The counter‐ion density profile is worked out explicitly for both repulsive and attractive dielectric image cases (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Annealing effects on structure and laser-induced damage threshold of Ta2O5/SiO2 dielectric mirrors

The effects of annealing on structure and laser-induced damage threshold (LIDT) of Ta₂O₅/SiO₂ dielectric mirrors were investigated. Ta₂O₅/SiO₂ multilayer was prepared by ion beam sputtering (IBS), then annealed in air under the temperature from 100 to 400 °C. Microstructure of the samples was characterized by X-ray diffraction (XRD). Absorption of the multilayer was measured by surface thermal lensing (STL) technique. The laser-induced damage threshold was assessed using 1064 nm free pulsed laser at a pulse length of 220 μs.

It was found that the center wavelength shifted to long wavelength gradually as the annealing temperature increased, and kept its non-crystalline structure even after annealing. The absorbance of the reflectors decreased after annealing. A remarkable increase of the laser-induced damage threshold was found when the annealing temperature was above 250 °C.     

Sr位Nd掺杂对SrBi$lt;sub$gt;2$lt;/sub$gt;Nb$lt;sub$gt;2$lt;/sub$gt;O$lt;sub$gt;9$lt;/sub$gt;性能的影响及机理研究

采用传统固相法制备了（Sr_1-3x/2A_x/2Nd_x）Bi₂Nb₂O₉（x=0,0.05,0.1和0.2）陶瓷,并系统研究了Nd离子取代Sr离子对SrBi₂Nb₂O₉性能的影响及其作用机理.研究结果表明：Sr_1-3x/2A_x/2Nd_xBi₂Nb₂O₉的介电常数和介电损耗随温度变化的行为具有明显的离子松弛极化特征.Nd³⁺对Sr²⁺的部分取代,导致Sr_1-3x/2A_x/2Nd_xBi₂Nb₂O₉剩余极化强度P_r稍有下降,但其压电系数d₃₃却有所增加,根据铁电热力学理论,这是Nd³⁺对Sr²⁺取代导致材料介电常数增大所致.Sr_1-3x/2A_x/2Nd_xBi₂Nb₂O₉的居里温度（T_C）没有随Nd含量的增加而变化,拉曼光谱技术分析表明这是其NbO₆八面体畸变程度没有发生变化所致.Nd³⁺取代Sr²⁺提高了材料的介电常数ε_r、压电系数d₃₃、机电耦合系数K_p,同时降低了机械品质因数Q_m,但是谐振频率温度系数C值没有改变. 关键词： 压电陶瓷 介电性能 压电性能 拉曼光谱     

热膨胀系数异性轴夹角优化分析

高超声速飞行器需要先进的材料进行热防护,比如增强碳/碳材料.有两种将碳纤维制作成碳/碳球锥外形的工艺,研究表明在每种工艺中,碳/碳块体或碳纤维热膨胀系数异性轴角度对结构热应力影响很大,为此本文发展了一套优化设计方法,对给定的对流加热温度场可以实现球锥热应力的最小化.分析结果表明对于热膨胀系数异性轴角度,存在某些取值点,那时结构热应力分别达到最大和最小值.在异性轴模晕小于同性平面模量的条件下,对于工艺1,如果将球锥对称轴设置成垂直于碳/碳块体的同性平面,可以将热应力减至最小;对于工艺2,如果能将编制面内的碳纤维束异性轴角度取成负值(即指向来流方向),则球锥热应力也可以得到相当程度的减小.     

介质阻挡放电系统中超四边形斑图形成的实验研究

采用水电极介质阻挡放电装置,在氩气和空气的混合气体放电中,对超四边形斑图的形成进行了实验研究.发现随着外加电压的升高,斑图类型经历了四边形斑图、准超点阵斑图、超四边形斑图、条纹斑图或六边形斑图的演化顺序.对这些斑图进行了傅里叶谱分析,得到了空间模式随电压的变化关系.此外,在外加电压升高的过程中,出现了具有不同空间尺度的两种超四边形斑图,它们满足不同的驻波条件.分析了壁电荷在超四边形斑图形成中的作用.实验测量了斑图类型随气隙间距和外加电压变化的相图以及超四边形斑图随气隙间距和气隙气压变化的相图.测量了击穿电 关键词： 介质阻挡放电 斑图 壁电荷 放电参量     

All-dielectric bowtie waveguide with deep subwavelength mode confinement

Plasmonic waveguides and conventional dielectric waveguides have favorable characteristics in photonic integrated circuits. Typically, plasmonic waveguides can provide subwavelength mode confinement, as shown by their small mode area, whereas conventional dielectric waveguides guide light with low loss, as shown by their long propagation length. However, the simultaneous achievement of subwavelength mode confinement and low-loss propagation remains limited. In this paper, we propose a novel design of an alldielectric bowtie waveguide, which simultaneously exhibits both subwavelength mode confinement and theoretically lossless propagation. Contrary to traditional dielectric waveguides, where the guidance of light is based on total internal reflection, the principle of the all-dielectric bowtie waveguide is based on the combined use of the conservation of the normal component of the electric displacement and the tangential component of the electric field, such that it can achieve a mode area comparable to its plasmonic counterparts. The mode distribution in the all-dielectric bowtie waveguide can be precisely controlled by manipulating the geometric design. Our work shows that it is possible to achieve extreme light confinement by using dielectric instead of lossy metals.     

一种新的航天器外露介质充电模型

为综合考虑高能电子辐射与周围等离子体对航天器外露介质充电的影响,在航天器内带电模型的基础上,通过添加边界充电电流来考虑等离子体与航天器介质表面的相互作用,并统一参考电位为等离子体零电位,建立了航天器外露介质充电模型,给出了新模型的一维稳态解法,并与表面充电模型和深层充电模型进行了对比分析.结果表明:新建模型能够综合考虑表面入射电流、深层沉积电流和传导电流对充电的耦合作用过程,实现外露介质表面和深层耦合充电计算,有利于全面评估航天器外露介质的充电问题.