Gas chromatographic determination of organolead compounds with an alternating current plasma detector

The performance of the gas chromatography/alternating current plasma detector as a selective detector for organolead compounds is investigated. The helium make-up flow rate and the spatial position from which the lead emission is viewed, have an effect on the detector response. The detection limit for tetrabutyl lead was established as 130 pg/s and the lead selectivity ratio was found to exceed 13,800. Some applications of organolead determination in complex matrices were also studied in order to demonstrate the selectivity and sensitivity of the alternating current plasma detector.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Zero Current Potentiometry for Measuring the Interface Potential at the Electrode/Solution Interface. Theoretical and Experimental Study

A novel electrochemical approach has been proposed to measure the interface potential at the electrode/solution interface based on reconstructing the three‐electrode system of a potentiostat. In this work, the method was investigated both theoretically and experimentally. Mathematical expressions, describing current? potential characteristics, were derived. Zero current potential E_zcp was defined as the potential at which the current is zero based on linear sweep voltammetry, and was determined from the I? E curve to measure the interface potential. The experimental results obtained with the couples Fe(CN)₆^3?/Fe(CN)₆^4? and Co(NH₃)₆³⁺/Co(NH₃)₆²⁺ as examples agreed well with the theory. The proposed approach exhibits an excellent performance for measuring the interface potential due to the advantages of rapidity, high stability and accuracy.     

Non‐contact evaluation of the electrical conductivity of thin metallic films by eddy current microscopy

An eddy current microscopy technique to evaluate the electrical conductivity of thin metallic films in a non‐contact manner is reported. A narrow track formed in an approximately 100 nm thick Au film was prepared, and a Co–Cr coated magnetic tip was driven to oscillate above the track both with and without current passing through the track. Despite the absence of current, the electromagnetic interaction between the tip and the stray magnetic field from the track gave rise to a phase delay in the probe. This was due to an eddy current being induced within part of the track. Moreover, measurements of the phase change in the probe oscillation for different metallic films with thicknesses of about 100 nm found this to be proportional to the electrical conductivity of the film. Finally, the electrical conductivity of an Al film was evaluated using the eddy current microscopy technique. Copyright © 2012 John Wiley & Sons, Ltd.     

Contribution à l'étude Électrochimique de Dérivés de l'Acide Mercapto-2 Pyridinecarboxylique-5. II

Abstract

Electrochemical caracteristics of 2-mercaptopyridine-5-carboxylic acid and its methylic ester have been determined using recent polarographic techniques. Measurements have been carried out as a function of parameters such as frequency, others surimposed signals and as a function of concentration and pH. Results are compared to those obtained for selectively methylated on sulfur or nitrogen atoms derivatives. Interpretations of the data are given. The optimal conditions for a quantitative determination by D.C. and differential pulse polarography are fixed.     

Conduction mechanism of metal-TiO2–Si structures

The conduction model has been proposed for the metal-TiO₂–Si (MIS) structures. Rutile films have been prepared on Si substrates by magnetron sputtering of TiO₂ target and annealing in the air at temperatures T?=?800 and 1050 K. The current-voltage (CVC) and capacitance-voltage characteristics of the structures have been measured over the range of T?=?283–363 K. At positive potentials on the gate, the conductivity of the MIS structures is determined by the space charge-limited current in the dielectric layer.     

Topological textures and their bifurcation processes in 2D ferromagnetic thin films

In this paper, by the use of the topological current theory, the topological structures and the dynamic processes in thin-film ferromagnetic systems are investigated directly from the viewpoint of topology. It is found that the topological charge of a thin-film ferromagnetic system can be changed by annihilation or creation processes of opposite polarized vortex–antivortex pairs taking place at space–time singularities of the normalized magnetization vector field of the system, the variation of the topological charge is integer and can further be expressed in terms of the Hopf indices and Brouwer degrees of the magnetization vector field around the singularities. Moreover, the change of the topological charge of the system is crucial to vortex core reversal processes in ferromagnetic thin films. With the help of the topological current theory and implicit function theorem, the processes of vortex merging, splitting as well as vortex core reversal are discussed in detail.     

计入孔隙结构影响的复层含油轴承润滑特性分析

基于Darcy定律和Kozeny-Carman孔隙方程,建立多孔质复层含油轴承的流体润滑模型,利用有限差分法数值模拟,分析复层结构和孔隙参数对含油轴承润滑性能的影响.得出结论如下:复层含油轴承润滑性能随轴承高度增大而变差,随孔隙率减小而变好,当总孔隙率一定时,较低的表层孔隙率有利于提高复层含油轴承润滑性能.因此设计复层含油轴承时,在保证一定孔隙含油量的前提下,应尽可能减小表层孔隙率.研究工作为复层含油轴承摩擦学性能分析与结构设计提供一定的理论基础.