New Type of an Adsorption Layer of Organic Molecules with a Cage Structure Condensed at the Electrode/Solution Interface: The Adsorption of Cubane Derivatives on a Mercury Electrode

A synthesis and a study by method of measuring the differential capacitance on a stationary mercury drop of the adsorption of a number of cubane derivatives in a surface-inactive electrolyte are performed. It is established that the compounds studied exhibit a high surface activity. For bromine derivatives of cubane (4-bromomethoxycarbonylcubane, 4-bromohydroxymethylcubane) the formation of two-dimensional adsorption layers is discovered. Values of adsorption parameters for these compounds are evaluated with use made of the Frumkin isotherm.     

Potential distribution across membranes with surface-charge layers. Effects of ionic solubility

A model is presented for the potential distribution across a charged membrane. The membrane-fixed charges are assumed to be distributed through a surface layer of non-zero thickness on the membrane. We treat the surface layer as a different phase from the surrounding solution phase. The potential arises from the membrane-fixed charges and from different solubilities of positive and negative electrolyte ions in the two phases. Equations are presented for the potential distribution, which involve the partition coefficients of electrolyte ions and the relative permittivity of the surface layer.     

Diffusion layer titration of dipyrone in pharmaceuticals at a dual-band electrochemical cell

This paper describes the use of a thin-layered dual-band electrochemical cell operating at flow conditions to determine dipyrone (sodium salt of 1-phenil-2,3-dimethyl-4-methylaminomethanesulfonate-5-pyrazolone) by reaction with electrogenerated iodine. The electrolytic cell consisted of two closely spaced gold electrodes, the upper stream electrode serving as the generator electrode and the downstream electrode working as the collector electrode. A linear dynamic range from 2 to 15 μmol l⁻¹ dipyrone was obtained by using a sample volume of 100 μl, with a detection limit of 1.1 μmol l⁻¹. Standard deviation (S.D.) of 3.4% for 20 repetitive injections of a 40 μmol l⁻¹ dipyrone solution and sampling frequency of 90 h⁻¹ were achieved. The results obtained with the thin-layered dual-band electrochemical cell for dipyrone determination in three different pharmaceutical samples compared well with those found by iodimetry with coulometrically generated iodine.     

The use of silicon in the preparation of apolar glass capillary columns

As an extention of previous reports, variables affecting the performance of columns modified by silicon deposition have been optimized. The aim of this work was to produce thermostable apolar glass capillary columns regardless of the glass type used and to maintain column performance under stressful conditions. The main parameters studied were the influence of glass type, leaching effects, and silicon layer thickness on column activity. Deactivation and stationary phase conditions were held constant. Both coated and uncoated columns were tested. The thickness of the silicon layer was found to be relatively unimportant. There was no difference whether soft glass or borosiiicate glass was used and leaching before silicon deposition did not influence column activity. Bare silicon surfaces showed considerable activity especially in respect to interactions with free acids and bases. There are indications that the surface consists of silicon oxide and other oxygenated forms of silicon rather than of the element. Treatment of the silicon layers with dilute hydrofluoric acid and the strict exclusion of traces of oxygen and water did not improve the situation. In spite of such specific interactions, silicon surfaces were easily deactivated by heat treatment with polysiloxanes. Silicon surfaces deactivated by baking with octamethyltetrasiloxane at 400°C are inert and temperature stable and show characteristics similar to persilylated surfaces.     

Non-aqueous,reversed-phase,high-performance,thin-layer chromatography and column liquid chromatography of metal complexes of porphine

Summary The chromatographic mobility of 21H, 23H-porphine and its Ni(II), Cu(II), Zn(II) and Pd(II) complexes were investigated by high-performance thin-layer chromatography on an octadecyl-bonded, silica gel plate with various polar organic solvents including alcohols, acetonitrile, dimethylsulfoxide and propylenecarbonate. The mobility generally decreases according to the central metal ion of the complex as follows: Zn(II)>(free porphine)>Ni(II)>Pd(II)>Cu(II). Methanol is a good choice of solvent for the separation of these metal porphine complexes. Successful separation of porphine and the four metal complexes is accomplished within 13 min on a LiChrosorb RP-18 column with methanol eluent.     

Transient electrophoresis of a charged porous particle

The starting electrophoretic motion of a porous, uniformly charged, spherical particle, which models a solvent-permeable and ion-penetrable polyelectrolyte coil or floc of nanoparticles, in an arbitrary electrolyte solution due to the sudden application of an electric field is studied for the first time. The unsteady Stokes/Brinkman equations with the electric force term governing the fluid velocity fields are solved by means of the Laplace transform. An analytical formula for the electrophoretic mobility of the porous sphere is obtained as a function of the dimensionless parameters , , , and , where a is the radius of the particle, κ is the Debye screening parameter, λ is the reciprocal of the square root of the fluid permeability in the particle, ρ_p and ρ are the mass densities of the particle and fluid, respectively, ν is the kinematic viscosity of the fluid, and t is the time. The electrophoretic mobility normalized by its steady-state value increases monotonically with increases in and , but decreases monotonically with an increase in , keeping the other parameters unchanged. In general, a porous particle with a high fluid permeability trails behind an identical porous particle with a lower permeability and a corresponding hard particle in the growth of the normalized electrophoretic mobility The normalized electrophoretic acceleration of the porous sphere decreases monotonically with an increase in the time and increases with an increase in from zero at .     

Small-angle X-ray study of air-dried elastoidin using three- and one- dimensional correlation functions obtained from slit-smeared intensity

In the present paper an isotropic sample of air-dried elastoidin has been studied considering it to be a non-ideal two-phase densely packed system after the theories by Vonk [1]. The relevant important physical parameters obtained for the sample areE, the width of the transition layer,D, the average periodicity transverse to the layers, S/V, the specific inner surface ₁ and ₂, the volume fraction of two phases, i. e. matter and void,l ₁ andl ₂ the transversal lengths,l _r, the range of inhomogeneity,l _c, the length of coherence and 2E/D, the volume fraction of the transition layer. The values ofE obtained by two approches as given by Vonk [1] and Ruland [2] show but a small difference indicating the correctness of the analysis.     

On the electrophoretic mobility and zeta potential of montmorillonite in non-aqueous media

Experimental results on the electrophoretic velocity and mobility of Ca-montmorillonite in 2-propanol are reported. The variation of the electrophoretic velocity with the externally applied electric field and the particle size range, at constant volume fraction and temperature, is considered. Given the difficulties for determining the types and concentrations of ions present in these liquid media, two methods are discussed for the estimation of the double layer thickness and hence the product, necessary for the determination of the zeta potential () of the interface. Although both methods of calculation yield different values of, the results for the zeta potential are very similar in the regions of and characteristic of our systems. The application to the experimental data of three theoretical relations between electrophoretic mobility and zeta potential is also discussed.     

Recent development of non-faradaic potentiometry

Non-faradaic potentiometry has been plagued by a great many fundamental errors and a lack of conceptualization. Of greatest concern is the second Nernst equation hiatus. Potentiometry may be generally classified as faradaic and non-faradaic. The former deals with the redox reactions using the Nernst equation to explain the potential origin. The latter deals with the non-redox reactions using the Boltzmann and modified Boltzmann equations to explain the origin of electrode potential. Redox faradaic potentiometry has been well described in the textbooks. However, non-faradaic potentiometry has been almost completely neglected in the literature. Many well-known electrodes, such as the pH glass electrode, common reference electrodes, and ion selective electrodes (ISE) have been mistakenly interpreted as redox reactions or ion exchange reactions. New theories and experimental results show their mechanisms to be non-faradaic in nature. Furthermore, the reaction mechanisms for ISE have been confused in textbooks with redox reactions and the Nernst equation. The ISE potentials originating from adsorption of ions or charged particles based on surface charge density will be explained using the double and counterion triple layers concept. The new counterion triple layer concept may be applied to the potential development of sensors. The reason for a new concept, theory, or mechanism is to better explain the phenomena. Examples will be given of how our new concept explains the capacitor, counterion triple layer, surface adsorbed layers interactions, and the interface structure. We will also discuss the new sensor development based on the new adsorption concept. For the first time a new type of Ag/AgCl reference electrode for non-faradaic potentiometry will be presented, one without a liquid junction and with a Pt wire instead of a salt bridge. They will help open up a new horizon for electrochemical sensor research and may be used under unusual conditions, such as high temperature and high pressure, stirring, etc.     

Evaluation of phenyldimethylethoxysilane treated high-performance thin-layer chromatographic plates. Application to analysis of flavonoids inScutellariae radix

Summary The retention and selectivity of flavonoids (baicalin, baicalein, wogonin, oroxylin A) inScutellariae radix have been studies by high-performance thin-layer chromatography on phenyldimethylethoxysilane-treated silica plates. The silica plates treated with phenyl groups were used for physical and chemical analysis. From elemental carbon analysis, the maximum number of bonded phenyl surface groups per gram was calculated to be 0.467×10²¹ (Oginal silica plate: Merck Art. 15109, Silica gel 100 F₂₅₄). With methanol-1/15 M phosphate buffer (pH 6.2) mixtures as mobile phase, baicalin, baicalein, wogonin, and oroxylin A inScutellariae radix were separated. It has been shown that phenyl-treated plates are more suitable for selective separation of baicalin, baicalein, wogonin, and oroxylin A than octadecyl-treated plates.