Incorporation of pyrimidine fluorophores into poly(methylmethacrylate) polymer structures

Three polymethyl methacrylate based copolymers bearing arylvinylpyrimidine chromophores have been synthesized in four steps. Spectral properties of the copolymers have been studied in solution, powder and thin films and compared with the corresponding free chromophores. The copolymers exhibit strong emission solvatochromism and act as polarity sensors. They also exhibit halochromism: when adding acid, a bathochromic shift is observed in absorption whereas a red-shifted fluorescence is observed with increased intensity for the methoxy-substituted macromolecule.     

Electricity Storage With High Roundtrip Effciency in a Reversible Solid Oxide Cell Stack

We theoretically investigate the electricity storage/generation in a reversible solid oxide cell stack. The system heat is for the first time tentatively stored in a phase-change metal when the stack is operated to generate electricity in a fuel cell mode and then reused to store electricity in an electrolysis mode. The state of charge (H₂ frication in cathode) effectively enhances the open circuit voltages (OCVs) while the system gas pressure in electrodes also increases the OCVs. On the other hand, a higher system pressure facilitates the species diffusion in electrodes that therefore accordingly improve electrode polarizations. With the aid of recycled system heat, the roundtrip efficiency reaches as high as 92% for the repeated electricity storage and generation.     

Charge Transfer Through Dithieno[2,3‐a:3′,2′‐c]phenazine: Effect of Substitution Pattern on the Optoelectronic Properties of Regioisomeric Luminophores

Two series of regioisomeric luminophores that contained a dithieno[2,3‐a:3′,2′‐c]phenazine (DTP) unit as an electron acceptor have been designed and synthesized. To investigate the effect of substitution pattern on the optoelectronic properties of these luminophores, electron donors (N,N‐dihexylaniline or N,N‐dihexyl‐4‐vinylaniline) were incorporated at the 2,5‐, 8,11‐, and 9,10‐positions of the DTP unit. We found that the optoelectronic properties of the regioisomeric luminophores were greatly affected by the substitution pattern: functionalization at the 8,11‐positions of the DTP unit was superior to the other two substitution patterns in extending the effective π‐conjugation and strengthening the intramolecular charge‐transfer interactions. Moreover, the insertion of vinyl groups between the DTP and N,N‐dihexylaniline units narrowed the energy band‐gap for isomers 4 and 5 . However, hypsochromically shifted absorption and photoluminescence maxima were observed for isomeric luminophore 6 , in which electron donors were substituted at the 2,5‐positions of the DTP unit. These results should facilitate greater understanding of the structure–property relationships in regioisomeric semiconductors and present a new way to design optoelectronic materials with effective substitution patterns.     

pH‐Triggered Charge‐Reversal Polyurethane Micelles for Controlled Release of Doxorubicin

A series of pH‐triggered charge‐reversal polyurethane copolymers (PS‐PUs) containing methoxyl‐poly(ethylene glycol) (mPEG), carboxylic acid groups, and piperazine groups is presented in this work. The obtained PS‐PUs copolymers can form into stable micelles at pH 7.4, which response to a narrow pH change (5.5–7.5) and show a tunable pH‐triggered charge‐reversal property. Doxorubicin (DOX) is encapsulated into the PS‐PU micelles as a model drug. The drug release of DOX‐loaded PS‐PU micelles shows an obviously stepped‐up with reducing the pH. Meanwhile, it is found that the charge‐reversal property can improve the cellular uptake behavior and intracellular drug release in both HeLa cells and MCF‐7 cells. Additionally, the time‐dependent cytotoxicity of the DOX‐loaded PS‐PU micelles is confirmed by MTT assay. Attributed to the tunable charge‐reversal property through changing the molar ratio of piperazine/carboxyl, the PS‐PU micelles will be a potential candidate as an intelligent drug delivery system in future studies.

     

Scanning Electrochemical Microscopy for Electrochemical Detection of Single‐base Mismatches by Tagging Ferrocenecarboxylic Acid as a Redox Probe to DNA

Scanning electrochemical microscopy (SECM) was employed for sensitive detection of single base mismatches (SBMs) in a sandwiched dsDNA. Ferrocenecarboxylic acid (Fc), covalently conjugated to the dsDNA, was oxidized to Fc⁺ via the DNA‐mediated charge transfer from the underlying gold substrate, and reduced back to Fc by SECM tip generated ferrocyanide. The electrocatalytic oxidation of SECM tip‐generated ferrocyanide was sensitive to presence, as well as the type of SBMs. Apparent standard rate constants (k⁰_app) values for different SBMs, both near the electrode surface and far from it, were evaluated by SECM. The method can detect SBMs independent of their position in dsDNA.     

BiVO4‐TiO2 Composite Photocatalysts for Dye Degradation Formed Using the SILAR Method

Composite photocatalyst films have been fabricated by depositing BiVO₄ upon TiO₂ via a sequential ionic layer adsorption reaction (SILAR) method. The photocatalytic materials were investigated by XRD, TEM, UV/Vis diffuse reflectance, inductively coupled plasma optical emission spectrometry (ICP‐OES), XPS, photoluminescence and Mott–Schottky analyses. SILAR processing was found to deposit monoclinic‐scheelite BiVO₄ nanoparticles onto the surface, giving successive improvements in the films′ visible light harvesting. Electrochemical and valence band XPS studies revealed that the prepared heterojunctions have a type II band structure, with the BiVO₄ conduction band and valence band lying cathodically shifted from those of TiO₂. The photocatalytic activity of the films was measured by the decolourisation of the dye rhodamine 6G using λ>400 nm visible light. It was found that five SILAR cycles was optimal, with a pseudo‐first‐order rate constant of 0.004 min^?1. As a reference material, the same SILAR modification has been made to an inactive wide‐band‐gap ZrO₂ film, where the mismatch of conduction and valence band energies disallows charge separation. The photocatalytic activity of the BiVO₄–ZrO₂ system was found to be significantly reduced, highlighting the importance of charge separation across the interface. The mechanism of action of the photocatalysts has also been investigated, in particular the effect of self‐sensitisation by the model organic dye and the ability of the dye to inject electrons into the photocatalyst′s conduction band.     

Competition between Hydrophilic and Argyrophilic Interactions in Surface Enhanced Raman Spectroscopy

The competition for binding and charge‐transfer (CT) from the nitrogen containing heterocycle pyrimidine to either silver or to water in surface enhanced Raman spectroscopy (SERS) is discussed. The correlation between the shifting observed for vibrational normal modes and CT is analyzed both experimentally using Raman spectroscopy and theoretically using electronic structure theory. Discrete features in the Raman spectrum correspond to the binding of either water or silver to each of pyrimidine's nitrogen atoms with comparable frequency shifts. Natural bond orbital (NBO) calculations in each chemical environment reveal that the magnitude of charge transfer from pyrimidine to adjacent silver atoms is only about twice that for water alone. These results suggest that the choice of solvent plays a role in determining the vibrational frequencies of nitrogen containing molecules in SERS experiments.     

Stabilized nodal‐based finite element methods for the magnetic induction problem

We consider the time‐dependent magnetic induction model as a step towards the resistive magnetohydrodynamics model in incompressible media. Conforming nodal‐based finite element approximations of the induction model with inf‐sup stable finite elements for the magnetic field and the magnetic pseudo‐pressure are investigated. Based on a residual‐based stabilization technique proposed by Badia and Codina, SIAM J. Numer. Anal. 50 (2012), pp. 398–417, we consider a stabilized nodal‐based finite element method for the numerical solution. Error estimates are given for the semi‐discrete model in space. Finally, we present some examples, for example, for the magnetic flux expulsion problem, Shercliff's test case and singular solutions of the Maxwell problem. Copyright © 2015 John Wiley & Sons, Ltd.     

Poly(glycidyl methacrylate)‐grafted hydrophobic charge‐induction agarose resins with 5‐aminobenzimidazole as a functional ligand

Hydrophobic charge‐induction chromatography is a new technology for antibody purification. To improve antibody adsorption capacity of hydrophobic charge‐induction resins, new poly(glycidyl methacrylate)‐grafted hydrophobic charge‐induction resins with 5‐aminobenzimidazole as a functional ligand were prepared. Adsorption isotherms, kinetics, and dynamic binding behaviors of the poly(glycidyl methacrylate)‐grafted resins prepared were investigated using human immunoglobulin G as a model protein, and the effects of ligand density were discussed. At the moderate ligand density of 330 μmol/g, the saturated adsorption capacity and equilibrium constant reached the maximum of 140 mg/g and 25 mL/mg, respectively, which were both much higher than that of non‐grafted resin with same ligand. In addition, effective pore diffusivity and dynamic binding capacity of human immunoglobulin G onto the poly(glycidyl methacrylate)‐grafted resins also reached the maximum at the moderate ligand density of 330 μmol/g. Dynamic binding capacity at 10% breakthrough was as high as 76.3 mg/g when the linear velocity was 300 cm/h. The results indicated that the suitable polymer grafting combined with the control of ligand density would be a powerful tool to improve protein adsorption of resins, and new poly(glycidyl methacrylate)‐grafted hydrophobic charge‐induction resins have a promising potential for antibody purification applications.