具有分子内电子转移特征的氨基蒽醌类有机化合物的合成 及光物理性质研究

合成了一系列1,5-二烷基氨基蒽醌类和含有可光致聚合CH2＝CHCO2基团且具有分子内电子转移特征的烷基氨基蒽醌类有机光功能化合物. 通过1H NMR, IR和MS对合成的化合物进行了结构鉴定. 通过光引发测试等实验证明, 含有可光致聚合CH2＝CHCO2的基团、具有分子内电子转移特征的烷基氨基蒽醌/邻氯六芳基双咪唑(HABI)体系, 在500 nm左右的可见光照射下, 且具有较快的光漂白速度和较高的光引发效率, 可以与Ar＋激光器匹配作为高效可见光敏聚合的光引发-吸收剂使用.     

杂双核(H)Rh-Cr配合物中乙烯插入RhI—H键反应的密度泛函研究

采用密度泛函理论B3LYP方法研究了配体和配位数对乙烯插入杂双核(CO)₄Cr(m-PH₂)₂RhH(L_n) (L＝CO或PH₃, n＝1或2)配合物中Rh—H键反应的影响. 计算结果表明, 六配位乙烯复合物中乙烯与铑之间轨道相互作用主要为乙烯到铑中心的s供体相互作用; 而五配位乙烯复合物中乙烯与铑中心间相互作用涉及乙烯到铑中心的s供体相互作用和铑到乙烯的p反馈作用. PH₃配体在热力学上不利于该反应. 处于氢配体对位的膦配体能加速乙烯插入反应. 乙烯插入的五配位反应途径占优势. Cr(CO)₄部分的引入降低了乙烯插入反应的活化能.     

The influence of calcination on the size of nanocrystals, porous structure and acid–base properties of mesoporous anatase used as catalytic support

Mesoporous anatase was prepared following sol–gel and using urea as template. The influence of calcination temperature on the phase stability, nanocrystal/aggregate size, pore size distribution and specific surface area as well as on the acid–base behavior in aqueous solutions was studied using X-ray diffraction, laser-Raman and diffuse reflectance spectroscopies, scanning electron microscopy and laser scattering as well as N₂ adsorption–desorption isotherms and potentiometric mass titrations.The crystal structure was kept constant upon calcination over the whole temperature range, 200–500 °C. In this range anatase is constituted from primary nanocrystals. These are assembled into larger, rather spherical, clusters of about 30–40 nm and then into aggregates of various sizes (0.2–0.3 μm and 2–100 μm) with a distribution centered at about 12 μm. Increase of the calcination temperature caused an increase in the size of the primary nanocrystals from 8.1 nm at 200 °C to 17.1 nm at 500 °C, whereas calcination does not influence the morphology at micro-scale. Moreover, increase of the calcination temperature from 200 °C to 500 °C brings about a shift in the mean pore diameter from 47 nm to 91 nm accompanied by a decrease in the specific surface area and pore volume. The above effects were related with the aforementioned increase in the size of the primary nanocrystals. The value of pzc and the values of surface charge determined at various pH do not practically depend on the calcination temperature. The absence of pore space confinement effects was explained in terms of the structure and size of the interface development between the anatase surface and the electrolytic solution.     

Photoinduced intramolecular charge transfer and S2 fluorescence in thiophene-pi-conjugated donor-acceptor systems: experimental and TDDFT studies

Experimental and theoretical methods were used to study newly synthesized thiophene-pi-conjugated donor-acceptor compounds, which were found to exhibit efficient intramolecular charge-transfer emission in polar solvents with relatively large Stokes shifts and strong solvatochromism. To gain insight into the solvatochromic behavior of these compounds, the dependence of the spectra on solvent polarity was studied on the basis of Lippert-Mataga models. We found that intramolecular charge transfer in these donor-acceptor systems is significantly dependent on the electron-withdrawing substituents at the thienyl 2-position. The dependence of the absorption and emission spectra of these compounds in methanol on the concentration of trifluoroacetic acid was used to confirm intramolecular charge-transfer emission. Moreover, the calculated absorption and emission energies, which are in accordance with the experimental values, suggested that fluorescence can be emitted from different geometric conformations. In addition, a novel S(2) fluorescence phenomenon for some of these compounds was also be observed. The fluorescence excitation spectra were used to confirm the S(2) fluorescence. We demonstrate that S(2) fluorescence can be explained by the calculated energy gap between the S(2) and S(1) states of these molecules. Furthermore, nonlinear optical behavior of the thiophene-pi-conjugated compound with diethylcyanomethylphosphonate substituents was predicted in theory.     

Synthesis, fluorescence, and two-photon absorption of bidentate phosphane oxide derivatives: complexation with pb(2+) and cd(2+) cations

A series of fluorescent phosphane oxide derivatives based on diphenylphosphanoethane (DPPE) and diphenylphosphanomethane (DPPM) skeletons has been prepared by means of Grignard reactions and Sonogashira cross-couplings. The photophysical properties and the linear and nonlinear spectra of these compounds have been investigated. An edge-to-face conformation resulting in the formation of an excimer was confirmed by fluorescence lifetime measurements of these multichromophoric derivatives. Upon complexation with heavy metal ions such as Pb2+ and Cd2+, a red shift of the one- and two-photon excitation spectra was observed in the absorption and emission spectra. Furthermore, enhancement of the electron-withdrawing character of the phosphane oxide resulted in a significant enhancement of the two-photon absorption cross-section, leading to the first biphotonic Cd2+ sensors combining high affinity for Cd2+, large two-photon absorption cross-sections, and significant enhancement of the two-photon excited fluorescence in the presence of the cation. Such derivatives are highly promising for incorporation into devices for the detection of heavy metal ions in water and effluents.     

Topochemical modification of cotton fibres with carboxymethyl cellulose

Adsorption of carboxymethyl cellulose (CMC) as a method to introduce charged (ionizable) groups onto cellulose cotton fibre surfaces was investigated. The method was based on application of a previously published method used for wood fibres. The amount of adsorbed ionizable groups was determined indirectly by analysis of CMC in solution by the phenol–sulphuric acid method and directly by conductometric titration of the fibres. Results from the two methods correlated well. The molecular weight and purity of the CMC had an influence on its adsorption onto cotton; high molecular weight CMC was preferentially adsorbed. The adsorbed charge correlated linearly with the amount of CMC adsorbed. The total charge of the cotton fibres could be increased by more than 50% by adsorption of CMC. It is expected that this modification procedure can be used in a wide spectrum of practical applications. Lidija Fras Zemljič and Karin Stana-Kleinschek are the members of the European Polysaccharide Network of Excellence (EPNOE).     

Synthesis and properties of DNA complexes containing 2,2,6,6-tetramethyl-1-piperidinoxy (TEMPO) moieties as organic radical battery materials

We report here the first example of organic radical battery with DNA. Though there is a growing interest in DNA/cationic-lipid complexes as promising gene delivery vehicles, few efforts have been focused on the use of such complexes as advanced materials for organic optoelectronic applications. The present article describes how substitution of the sodium counter cation of DNA with cationic amphiphilic lipid(1-4) provided novel DNA-lipid complexes that contain TEMPO radicals, in which the actual mole ratio of phosphate to lipid was 1:0.84 to 1:0.16. All the TEMPO-containing DNA-lipid complexes displayed reversible two-stage charge/discharge processes, the discharge capacities of which were 40.5-60.0 A h kg(-1). In particular, the capacity of a DNA-lipid(3)-based cell reached 60.0 A h kg(-1), which corresponds to 192 % relative to its theoretical value for the single-electron one-stage process, indicating a two-electron process.     

Ultrafast excited state dynamics controlling photochemical isomerization of N-methyl-4-[trans-2-(4-pyridyl)ethenyl]pyridinium coordinated to a {Re I(CO)3(2,2'-bipyridine)} chromophore

Two multifunctional photoactive complexes [Re(Cl)(CO)(3)(MeDpe(+))(2)](2+) and [Re(MeDpe(+))(CO)(3)(bpy)](2+) (MeDpe(+)=N-methyl-4-[trans-2-(4-pyridyl)ethenyl]pyridinium, bpy=2,2'-bipyridine) were synthesized, characterized, and their redox and photonic properties were investigated by cyclic voltammetry; ultraviolet-visible-infrared (UV/Vis/IR) spectroelectrochemistry, stationary UV/Vis and resonance Raman spectroscopy; photolysis; picosecond time-resolved absorption spectroscopy in the visible and infrared regions; and time-resolved resonance Raman spectroscopy. The first reduction step of either complex occurs at about -1.1 V versus Fc/Fc(+) and is localized at MeDpe(+). Reduction alone does not induce a trans-->cis isomerization of MeDpe(+). [Re(Cl)(CO)(3)(MeDpe(+))(2)](2+) is photostable, while [Re(MeDpe(+))(CO)(3)(bpy)](2+) and free MeDpe(+) isomerize under near-UV irradiation. The lowest excited state of [Re(Cl)(CO)(3)(MeDpe(+))(2)](2+) has been identified as the Re(Cl)(CO)(3)-->MeDpe(+ 3)MLCT (MLCT=metal-to-ligand charge transfer), decaying directly to the ground state with lifetimes of approximately 42 (73 %) and approximately 430 ps (27 %). Optical excitation of [Re(MeDpe(+))(CO)(3)(bpy)](2+) leads to population of Re(CO)(3)-->MeDpe(+) and Re(CO)(3)-->bpy (3)MLCT states, from which a MeDpe(+) localized intraligand (3)pipi* excited state ((3)IL) is populated with lifetimes of approximately 0.6 and approximately 10 ps, respectively. The (3)IL state undergoes a approximately 21 ps internal rotation, which eventually produces the cis isomer on a much longer timescale. The different excited-state behavior of the two complexes and the absence of thermodynamically favorable interligand electron transfer in excited [Re(MeDpe(+))(CO)(3)(bpy)](2+) reflect the fine energetic balance between excited states of different orbital origin, which can be tuned by subtle structural variations. The complex [Re(MeDpe(+))(CO)(3)(bpy)](2+) emerges as a prototypical, multifunctional species with complementary redox and photonic behavior.     

Water-soluble, electroactive, and photoluminescent quaterthiophene-dinucleotide conjugates

Quaterthiophene-dinucleotide conjugates 5'TA3'-t4-3'AT5', 5'AA3'-t4-3'AA5', and 5'TT3'-t4-3'TT5' (TA: thymidine-adenosine, AA: adenosine-adenosine, TT: thymidine-thymidine) were synthesized and analyzed by a combination of spectroscopy and microscopy, electrical characterization, and theoretical calculations. Circular dichroism (CD) experiments demonstrated a transfer of chirality from the dinucleotides to quaterthiophene at high ionic strength and in cast films. The films were photoluminescent and electroactive. CD and photoluminescence spectra and current density/voltage plots (measured under dynamic vacuum) displayed significant variation on changing the dinucleotide scaffold. Molecular mechanics and molecular dynamics calculations indicated that the conformation and packing modes of the conjugates are the result of a balance between intra- and intermolecular nucleobase-thiophene stacking interactions and intramolecular hydrogen bonding between the nucleobases.     

A selective colorimetric chemosensor for thiols based on intramolecular charge transfer mechanism

Compound 1 as an electron donor-acceptor compound with N,N-dimethylaniline and quinone units was designed for a highly selective colorimetric determination of thiol-containing amino acids and peptides, by making use of the unique reactivity of thiol towards quinone. Compound 1 shows a strong intramolecular charge transfer (ICT) band around 582 nm; but, it decreased after addition of either cysteine (Cys) or glutathione (GSH). Moreover, the ICT band intensity at 582 nm decreased linearly with the increasing concentrations of Cys or GSH. The interference from other amino acids can be neglected. Therefore, compound 1 can be employed as a selective colorimetric visual chemosensor for thiol-containing amino acids and peptides.