The dynamics of a two-component fluid in the presence of capillary forces

In the present paper we study the qualitative behavior ast→∞ of the solution of the Cauchy problem for a system of equations describing a dynamics of a two-component viscous fluid. The model under consideration takes into account the mutual diffusion of the fluid components as well as their capillary interaction. We describe the ω-limit set of trajectories of the dynamical system generated by the problem. It is proved that the stationary solution of the problem, is a homogeneous stationary distribution of one of the components, is asymptotically stable. Any other stationary solution is not asymptotically stable and is even unstable if there are no close stationary solutions corresponding to a smaller energy level. Translated fromMatematicheskie Zametki, Vol. 62, No. 2, pp. 293–305, August, 1997. Translated by A. M. Chebotarev     

AN ENCOMPASSING APPROACH TO MODELING FISHERY DYNAMICS: MODELING DYNAMIC NONLINEAR SYSTEMS

Uncertainty about the nature and significance of nonlinearities and the manner in which dynamics affect future realizations makes model specification the most difficult aspect of modeling dynamic systems. By interpreting several popular fishery models as subcases of a nesting dynamic Taylor series approximation, we isolate the specification differences between these models in a way that accounts for commonalities. On the argument that the differences due to alternative nonlinear forms are likely to be small compared to more mundane considerations such as delay difference and general dynamic lag specification, we propose an alternative model that uses the terms from the first order approximation common to all models combined with a data-based determination of the appropriate lags using the methods of state space time series analysis. Finally, the success of the alternative models is judged in an application to Pacific halibut data.     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

Particle multiplicities in the fission-like reactions of 340 MeV Si on Th

Pre-scission and post-scission multiplicities of neutrons and alpha particles have been simultaneously measured for the fission-like reactions of 340 MeV ²⁸Si on ²³²Th. Dynamical model calculations using HICOL code predict that about 90% of the observed events are of quasi-fission type while the remaining 10% are from compound nucleus fission decay. Moving source fits were carried out to the observed neutron and alpha particle spectra, measured at different angles with respect to the fragment directions. The pre-scission and post-scission neutron multiplicities are deduced to be 8.7±2.0 and 9.4±2.0, respectively. The corresponding multiplicity values for alpha particles are found to be 0.22±0.08 and 0.1±0.03. From the measured post-scission neutron multiplicity, it is inferred that about 65±20 MeV of the initial excitation energy remains at scission. This may be compared to the value of 85±30 MeV estimated from PACE2 statistical model calculations, adjusted to reproduce the measured pre-scission neutron multiplicity. From a comparison of the Statistical Model predictions with the measured pre-scission neutron multiplicity, the fission delay is estimated to be of 5⁺⁷₋₃×10⁻²⁰ s which overlaps with the average duration of fission-like process from the contact to the scission point (2×10⁻²⁰ s) as determined from HICOL-based dynamical calculations. For the delay time deduced as above, the pre-scission alpha particle multiplicity calculated by the PACE2 code is about a factor two larger than the experimental one, demonstrating the difficulties in modelling the alpha particle emission from highly elongated shapes that characterize the fissioning system from the contact point to scission.     

Relativistic Dynamics in Basic Chemistry

This paper revisits the historical sequence in which some of the major developments of 20th-century physics occurred, and explores how theories could have turned out differently, if the sequence of developments had been different. It shows how a delay in founding special relativity theory until after (1) at least one puzzling problem in electromagnetic theory could be acknowledged, and (2) sat least some of the experimental observations pertinent to the development of quantum mechanics had become well known, could have resulted in a larger theory that covers both domains in a manner quite different from that of any of the theories we use today. The revised theory dispenses with a separate postulate introducing Planck’s constant h, identifying instead a physical mechanism that implies the constant. Some important aspects of quantum chemistry then follow. Editor, Galilean Electrodynamics, Proceedings of the Natural Philosophy Alliance; Visiting Industry Professor, Tufts University, retired     

H andH NMR Relaxation in Hydrogen-Bonded Solids Due to a Complex Motion: Classical Jumps over a Barrier and Incoherent Tunneling

Equations for the temperature dependence of proton and deuteron spin–lattice relaxation rates and second moments due to a complex motion consisting of classical jumps over a potential barrier and quantum mechanical tunneling through the barrier have been derived. Asymmetric double and triple potential wells are considered. These equations have been employed to analyze proton spin–lattice relaxation data for solid naphthazarin in the laboratory and rotating frames as a function of temperature. It is shown that tunneling plays an important role in the proton transfer dynamics of this compound.     

基于线性耦合下混沌系统的同步条件

将混沌同步问题用精确的数学语言给予描述，通过数学分析将其转化为微分方程组的稳定性问题.以Lorenz系统族的Chen氏系统作为典型系统，在线性耦合下分析系统参数，得到了系统达到同步时的充分条件，且在理论上加以证明.结合该条件，提出了一种确定耦合系数的方法.最后用仿真实验验证了该方法的正确性，并验证了在不同耦合方式和参考系统的情况下定理的有效性. 关键词： 混沌同步 耦合 稳定性     

颗粒速度在颗粒流稀疏流-密集流转变中的作用

用实验和计算模拟的方法研究了颗粒流中的颗粒速度与颗粒流特性的关系.实验研究发现当入口流量固定时，在出口上方高速运动的颗粒会使颗粒流由稀疏流向密集流转变的临界出口尺寸变小.当颗粒流转变为密集流后，颗粒速度的作用被出口上方的颗粒堆积区所消耗，最终变得与颗粒速度无关.二维分子动力学模拟计算得到了与实验相同的结论.通过二维分子动力学模拟计算，还给出了不同颗粒速度下体系的密度和速率在空间的分布图.这些分布图显示随着颗粒到达出口上方的瞬间速度的不同，颗粒堆积区的密度和高度均会改变，并最终导致颗粒流流动状态的改变. 关键词： 颗粒流 颗粒气体 分子动力学模拟