In‐line monitoring of UV photopolymerization with a quartz crystal resonator

An in‐line monitoring device using a quartz crystal resonator for thin film polymerization was proposed, and its performance has been evaluated by implementing in the UV polymerization of 2‐hydroxyethyl methacrylate with a photoinitiator of 1‐chloroanthraquinone. Because the variation of resonant resistance of the resonator is proportional to the square root of viscosity change that is closely related to the polymerization degree, the resistance can be used as a measure of the polymerization degree. The resistance measurements were compared with the outcome of instrumental analyses of polymerization degree using an FTIR spectrometer and a gel permeation chromatograph. The experimental results showed that the resistance measurements were consistent with the experimental outcome of the instrumental analyses, and this indicates the effectiveness of the proposed device. Owing to the simplicity and availability of the resonator system, its wide utilization in the monitoring of a variety of film polymerization processes, including photoresistor application, is expected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2428–2439, 2006     

利用低能质子束产生高强度放射性束流

加拿大TRIUMF实验室利用¹¹C成功验证了一种产生高强度(～10⁸ions/s)放射性束流的方法. 该方法不同于普通在线同位素分离方法, 它利用了13MeV的低能强流质子束, 可以产生一系列核天体物理实验感兴趣的高强度放射性束流.     

Theoretical Analysis of the Motional Model of Nonlinear Heterogeneous Catalysis

In this paper, a model of the motional nonlinear heterogeneous catalysis process is discussed using the characteristic line method, the analytical results of elution profile are obtained and the formula which determines the parameters of reaction rate and adsorption isotherm through the motional measurement data under the nonlinear condition is given.     

Experimental investigation on large deflection response of a frame impacted by a moving body

This paper reports on the experimental investigation of the dynamic large deflection response of a portal frame impacted at its midspan by a body moving at a certain speed. Both the deflection and velocity vs. time curves of the midspan and the dynamic history of a number of desired locations were recorded during the process of response. On the basis of the test data, the momentum and kinetic energy conversion between the frame and the moving body in the impact process are realized, and the occurrence and expansion of plastic regions are described. Investigation results show that the initial collision is approximately ideally inelastic, and that the elastic deformation plays a considerable role in the response though the input energy is much larger than the maximum elastic energy capacity of the beam member; therefore, in a general impact, the energy ratio should not be regarded as a sufficient criterion for a rigid—plastic solution. The ratios of the impulse transferred to and the energy absorbed by the frame in the initial collision to that carried by the moving body before impact is only related to the ratiobetween the equivalent mass of the frame paticipating in the initial collision and the mass of the impacting body, having nothing to do with the impacting velocity to a certain extent.     

在线氧含量分析中的自动反吹

为解决在线氧含量分析测试仪表常被聚合物堵塞的问题，提出了自动反吹的时序分配和实施控制方案，从而为安全生产提供了保障。     

Synthesis and Structure of a Manganese(Ⅱ) Complex: [Mn2·(dinitrobenzoic acid)4·(1,10-phen)2]n

The title compound, [Mn2·(dinitrobenzoic acid)4·(1,10-phen)2]n, has a linear chain structure containing binuclear [Mn2·(dinitrobenzoic acid)4(1,10-phen)2] repeat units. It crystallizes in the triclinic system, space group P1- with a = 7.9261(8), b = 12.1329(15), c = 14.847(2)(A), α = 103.845(5), β =101.424(5), γ= 92.618(4)°, Mr= 657.37, V= 1352.3(2) (A)3, Z = 2, Dc= 1.614 g/cm3, F(000) = 666, μ =0.567 mm-1, the final R = 0.0407 and wR = 0.1015 for 4081 observed reflections with I ＞ 2σ(Ⅰ). The Mn atom is six-coordinated by two N and four O atoms, forming a slightly distorted octahedral geometry. All Mn-O and Mn-N bond distances range from 2.093(2) to 2.310(2)(A). Two adjacent octahedral units are bridged together by two pairs of bi-monodentate carboxyl groups of different dinitrobenzoic acids to form an eight-membered ring with chair-typed configuration, thus generating a one-dimensional chain along the a axis.     

Syntheses and Crystal Structures of Two Coordination Polymers with Aromatic Dioxide as Bridge Ligands

Two coordination polymers, namely, two-dimensional complex 1 {[Cu(μ- L)1.5(ClO4)2(H2O)].(H2O)0.5}n (L = pyrazine-1,4-dioxide) and one-dimensional complex 2 [Co(μ-L)Br2(H2O)2]n, have been synthesized with pyrazine-1,4-dioxide as bridging ligands, and their crystal structures were determined by X-ray crystallography. Crystal data for complex 1: monoclinic system, space group C2/c, with a = 23.310(3), b = 12.2338(17), c = 10.6075(15) , β = 110.487(2)°, V = 2833.6(7) 3, Z = 8, C6H9Cl2CuN3O12.5, Mr = 457.60, Dc = 2.145 g/cm3, F(000) = 1832 and μ = 1.998 mm-1; and those for 2: monoclinic system, space group C2/c, with a = 11.012(3), b = 7.483(2), c = 11.451(3) , β = 101.654(4)°, V = 924.2(4) 3, Z = 4, C4H8Br2CoN2O4, Mr = 366.87, Dc = 2.637 g/cm3, F(000) = 700 and μ = 10.487 mm-1. 1 shows a two-dimensional sheet structure on the ac plane through the coordination of μ-L bridging ligands with Cu(II) ions, while 2 displays a zigzag one-dimensional chain along the c axis via the coordination of μ-L bridging ligand with Co(II) ions. Hydrogen bonds in 1 and 2 make the sheets (or chains) connect each other to form a three-dimensional structure.     

高温氧化-化学发光检测法测定水中总氮

采用高温氧化-化学发光检测法（high temperature oxidation ＆ chemiluminescence, HTO-CL）进行水质总氮（TN）的在线测定。总氮浓度（CN）与化学发光的强度（IN）呈良好的线性关系，线性区间为0．05～100mg／L。对真实水样采用本方法进行测定，其结果与国标方法相符，回收率在90％～110％之间。以本方法为工作原理的TN-2000型总氮测定仪可用于地表水质及污水的在线监测。     

多晶顺磁共振谱的拟合

对电子自旋1/2≤S<3.5,核自旋1/2≤I<4.5和配体少于10个的顺磁体系的多晶EPR谱的拟合进行研究。在VAX-11/785计算机上用FORTRAN语言建立EPR谱模拟程序包,计算了多个例子,获得较为满意的结果。     

透射电镜薄样品倾转过程中的附加旋转及其计算

模拟透射电镜双倾台进行样品位向调整过程,推导出反映样品倾转前后其合成倾转轴(即共有菊池线对的法线)方向变化规律的计算公式,称为附加旋转角计算公式。指出,实现样品位向调整的双倾操作,等效于样品绕其合成倾转轴的倾转及该倾转轴绕Z轴(平行入射束方向)的旋转之和。利用双倾台对薄膜样品进行的系列倾转实验表明,由附加旋转角公式计算的附加旋转角和实测值相一致。还根据双倾操作过程导出了合成倾转角的计算公式,它可用于判断样品位向调整的准确度。