Decomposition of no on Pd and Ir. Comparison with Pt and Rh

The unimolecular decomposition of NO has been examine on Pd and Ir and they are compared with the corresponding reactions on Pt and Rh. The runs were carried out in a differential flow reactor, at pressures from 0.01 to 5 Torr and temperatures from 500 to 1800 K. It was found that all rates of product formation could be described by Langmuir-Hinshelwood unimolecular rate expression, with an accuracy of±20% und all conditions. The decomposition of NO was virtually identical on Pt and Pd, and on Rh and Ir, but varied widely with temperature between these two groups of metals.     

Anwendung der Streustrahl-Methode zur Bestimmung der Elemente in Mineral?lprodukten mit Hilfe der R?ntgenfluorescenz-Spektral-Analyse am Beispiel der Bleibestimmung in Ottokraftstoffen

Zusammenfassung In einem relativ einfach durchzuführenden Verbundverfahren wird Selen im Sauerstoff-strom innerhalb 15 min bei 1100–1150°C quantitativ aus den Metall- bzw. Metalloxidschmelzen verdampft und in einer mit flüssigem Stickstoff gekühlten Vorlage aufgefangen. Das aus der Vorlage mit einer definierten Menge verdünnter HNO₃ in Gegenwart von Ni-Nitrat gelöste Selen läßt sich direkt durch AAS mit dem Graphitofen (FAAS) äußerst nachweisstark und zuverlässig bestimmen. Die Nachweisgrenze (elektrodenlose Entladungslampe) liegt bei 3×10^–11 g Se. Der Verfahrensverbund erlaubt mit Probenmengen 10 g in Ag und Au Se-Gehalte 0,05 ppb,inCu 0,1 ppb,in Bi 0,2 ppb und in Pb 10 ppb zu erfassen. Für draht-, stab- und spanförmige Proben erhält man für Se-Gehalte von 2–0,002 ppm Variationskoeffizienten zwischen 3 und 6%. Die Vollständigkeit der Se-Verdampfung aus den Matrices Cu, Ag, Au und Bi wurde ebenso wie die Richtigkeit des Gesamtverfahrens durch systematische Untersuchungen belegt.

---

Determination of se by furnace atomic absorption spectrometry (FAAS) in the ppb-range in Cu, Cu alloys, Ag, Au, Pb and Bi after volatilization in an oxygen stream

Summary Selenium is evaporated in a multi-stage procedure within 15 min from metals or metal oxides fused at temperatures of 1100–1150°C under a stream of oxygen and is trapped in a receiver cooled with liquid nitrogen. The condensed SeO₂ is dissolved with a definite volume of diluted HNO₃ in the presence of Ni-nitrate and determined with high sensitivity and reliability by FAAS (electrodeless discharge lamp). The detection limit of the FAAS was found to be 3 · 10^–11 g of Se. The multi-stage procedure allows to detect Se levels 0.05 ppb in Ag and Au, 0.1 ppb in Cu, 0.2 ppb in Bi, and 10 ppb in Pb, respectively, with sample weights 10 g. For wire, rod, and chip samples the coefficients of variation are found to be between 3 and 6% for Se contents of 2 to 0.002 ppm. The quantitative evaporation of Se from Cu, Ag, Au, and Bi as well as the accuracy of the whole procedure have been checked systematically.

Die Arbeit wurde durch Mittel der DFG in dankenswerter Weise unterstützt.     

Novel chemical modifications at the 4-position of chromones. Synthesis and reactivity of 4H-chromene-4-spiro-5′-isoxazolines and related compounds

Reactions of chromones with dilithiooximes proceed via nucleophilic 1,2-addition to give, on acidification, 4H-chromene-4-spiro-5′-isoxazoline derivatives in high yields. On treatment with concentrated H₂SO₄ the isoxazoline ring of this novel spiroannulated heterocyclic system opens to give α,β-unsaturated oximes, which undergo nitrosation, bromination, and the Beckmann rearrangement to the corresponding spiroisoxazolines and α,β-unsaturated amides, respectively. The latter can be obtained directly by the Beckmann rearrangement of 4H-chromene-4-spiro-5′-isoxazolines.     

苯并三氮唑及其羧酸酯衍生物对铜缓蚀机理的分子动力学模拟研究

用分子动力学(MD)方法, 模拟计算了5种铜缓蚀剂[苯并三氮唑(BTA)、苯并三氮唑-5-羧酸甲酯(MBTC)、苯并三氮唑-5-羧酸丁酯(BBTC)、苯并三氮唑-5-羧酸己酯(HBTC)、苯并三氮唑-5-羧酸辛酯(OBTC)]与Cu₂O晶体的相互作用. 结果发现, 中性条件下缓蚀剂分子与Cu₂O晶体的结合能均大于酸性条件下的数值, 但两种条件下结合能的大小排序均为OBTC＞HBTC＞BBTC＞MBTC＞BTA. 对体系各种相互作用以及对关联函数g(r)的分析表明, 体系结合能主要由库仑作用提供, Cu₂O晶体中的Cu原子与缓蚀剂分子中的N原子之间形成了配位键. 在与Cu₂O(001)晶面结合过程中, BTA及其衍生物分子发生了扭曲变形, 但形变能远小于体系的非键相互作用能.     

Thermodynamic dissociation constants of salicylic and monochloroacetic acids in mixed solvent systems from conductance measurements at 25°C

The molar conductances of dilute solutions of salicylic and monochloroacetic acids in binary mixtures of methanol, ethanol, 1-propanol, N,N-dimethylformamide, acetone, acetonitrile, tetrahydrofuran and dioxane with water have been measured at 25°C. The Lee-Wheaton conductance equation was fitted to the data in order to derive thermodynamic dissociation constants and limiting molar conductances. The results were compared with those in the literature pertaining to analogous media, mostly derived potentiometrically. The findings are interpreted in terms of a solvent effect on the ionization of these acids in mixed solvent systems.This paper is dedicated to the late Professor Raymond M. Fuoss on his 3^rd anniversary.     

Absolute Rate Constants for the Addition of the 1‐(tert‐Butoxy)carbonylethyl Radical onto Cyclic Alkenes in Solution

Absolute rate constants are reported for the addition of the 1‐[(tert‐butoxy)carbonyl]ethyl (= 2‐(1,1‐dimethylethoxy)‐1‐methyl‐2‐oxoethyl) radical ^.CHMeCO₂(t‐Bu) to several cyclic and monosubstituted alkenes in MeCN as obtained by time‐resolved electron paramagnetic resonance (EPR). The activation energies for the addition of this alkyl radical are mainly governed by the addition enthalpy but are also substantially lowered by the ambiphilic effect and by relief of cyclic strain.     

Low-temperature Heat Capacities and Thermodynamic Properties of Hydrated Sodium Cupric Arsenate [ NaCuAsO4·1.5H2O(s)]

Low-temperature heat capacities of the solid compound NaCuAsO4 · 1.5H2O(s) were measured using a precision automated adiabatic calorimeter over a temperature range of T = 78 K to T = 390 K. A dehydration process occurred in the temperature range of T = 368-374 K. The peak temperature of the dehydration was observed to be TD = (371.828±0.146) K by means of the heat-capacity measurement. The molar enthalpy and entropy of the dehyperimental values of heat capacities for the solid(Ⅰ) and the solid-liquid mixture(Ⅱ) were respectively fitted to two polynomial equations by the least square method. The smoothed values of the molar heat capacities and the fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated at an interval of 5 K.     

Reactions of bis(hexamethylbenzene)iron(0) with carbon monoxide and with unsaturated hydrocarbons

Thermal decomposition of bis(hexamethylbenzene)iron(0) in the presence of carbon monoxide yields a novel carbonyl iron complex, [C₆(CH₃)₆]Fe(CO)₂. The cyclohexadiene complex [C₆(CH₃)₆]Fe(C₆H₈) is obtained from reaction of bis(hexamethylbenzene)iron(0) with either 1,3-cyclohexadiene or benzene, and the yield is much greater in the presence of hydrogen gas. Interaction of bis-(hexamethylbenzene)iron(0) with 2-butyne induces a catalytic cyclotrimerization to give more hexamethylbenzene. Kinetic and isotope distribution studies indicate that the primary step in these reactions is not a direct loss of one ring ligand, but rather an insertion of the iron center into one of the ligand methyl CH bonds, leading to a benzyl hydride complex species. Mechanisms for the subsequent reactions of this iron hydride species are proposed.     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.