磁场中旋转运动圆环板主共振分岔及混沌研究

研究了磁场中旋转运动圆环板的磁弹性主共振及分岔、混沌问题.通过Hamilton(哈密顿)原理推得磁场中旋转运动圆环板的横向振动方程,并采用Bessel(贝塞尔)函数作为振型函数进行Galerkin(伽辽金)积分,得到磁场中旋转运动圆环板的无量纲非线性振动常微分方程.利用多尺度法展开,得到静态分岔方程、对应的转迁集与分岔图,以及物理参数作为分岔控制参数时的分岔图.利用Mel’nikov(梅利尼科夫)方法,对系统混沌特性进行研究,得到外边夹支内边自由边界条件下异宿轨破裂的条件;通过数值计算,得到外激振力幅值作为分岔控制参数时系统的分岔图与指定参数条件下系统响应图.结果表明,磁场扼制多值现象的产生;激振频率、转速、磁感应强度越小,激振力幅值越大,系统的异宿轨越容易发生破裂,从而引发混沌或概周期运动.     

Magnetic fluid based squeeze film between porous annular curved plates with the effect of rotational inertia

The squeeze film behaviour between rotating annular plates was analysed theoretically when the curved upper plate with a uniform porous facing approached the impermeable and flat lower plate, considering a magnetic fluid lubricant in the presence of an external magnetic field oblique to the plates. Expressions were obtained for pressure and load capacity; and response time is given by a differential equation. The increases in pressure and load capacity depended only on the magnetization. However, the increase in response time depended on magnetization, fluid inertia and speed of rotation of the plates.     

Reducing and annular Dehn fillings

If two Dehn fillings on a simple manifold create a reducible manifold and an annular manifold respectively, then the distance between those filling slopes is known to be at most two. Moreover, Eudave-Muñoz and Wu gave infinitely many examples of manifolds admitting reducing and annular Dehn fillings at distance two. In this paper, we complement their examples to establish a complete list of simple manifolds admitting such a pair of Dehn fillings.

     

Stability of weak solutions to the compressible Navier–Stokes equations in bounded annular domains

We prove the Lipschitz continuous dependence on initial data of global spherically symmetric weak solutions to the Navier–Stokes equations of a viscous polytropic ideal gas in bounded annular domains with the initial data in the Lebesgue spaces. Copyright © 2007 John Wiley & Sons, Ltd.     

Large amplitude free vibration of shear deformable laminated composite annular sector plates by a sector p-element

A sector p-element is presented for the large amplitude free vibration analysis of laminated composite annular sector plates. The effects of out-of-plane shear deformations, rotary inertia, and geometric non-linearity are taken into account. The shape functions are derived from the shifted Legendre orthogonal polynomials. The element stiffness and mass matrices are integrated analytically with the aid of symbolic computing. The method consists of modeling the annular sector plate as one element. The accuracy of the solution is improved simply by increasing the polynomial order. The time-dependent coefficients are described by a truncated Fourier series. The equations of free motion are obtained using the harmonic balance method and solved by the linearized updated mode method. Results for the linear and non-linear frequencies of clamped laminated composite annular sector plates are obtained. The case of a clamped isotropic annular sector plate is also shown. The linear frequencies are found to converge rapidly downwards as the polynomial order is increased. Comparisons of the linear frequencies with published results show excellent agreement. The effects of sector angle, inner-to-outer radius ratio, thickness-to-outer radius ratio, moduli ratio, number of plies, and layup sequence on the backbone curves are also investigated. It is shown that the hardening behavior increases or decreases depending on geometric and lamination parameters.     

轴向磁场对环形浅液池内硅熔体热毛细对流的影响

为了更好地了解轴向磁场对温度梯度作用下Marangoni-热毛细对流的影响,采用有限差分法对环形浅液池内硅熔体制单晶的流动进行了数值模拟.研究了三种不同边界条件下,Ha数分别为0、10、20、30对应下硅熔体内部流动强度和自由表面速度.结果表明,轴向磁场对浅液池内的Marangoni对流、热毛细对流和耦合的Marangoni-热毛细对流都有较好的抑制作用,且随着磁场强度的增强,抑制作用增加,更有利于提高晶体的结晶质量.当磁场强度和底部热流密度一定时,随着水平温度梯度的增加,靠近内壁的流动得到增强,外壁附近流动反而减弱.     

Green’s function solution for transient heat conduction in annular fin during solidification of phase change material

The Green’s function method is applied for the transient temperature of an annular fin when a phase change material (PCM) solidifies on it. The solidification of the PCMs takes place in a cylindrical shell storage. The thickness of the solid PCM on the fin varies with time and is obtained by the Megerlin method. The models are found with the Bessel equation to form an analytical solution. Three different kinds of boundary conditions are investigated. The comparison between analytical and numerical solutions is given. The results demonstrate that the significant accuracy is obtained for the temperature distribution for the fin in all cases.     

ANALYSIS OF VELOCITY ANNULAR EFFECT OF OSCILLATORY FLOW INSIDE PARALLEL PLATE CHANNEL

为了分析管内交变流动速度环状效应的特性,通过数值模拟对平板流道内可压缩交变流动的速度环状效应进行研究．根据速度环状效应的产生机理,分析得出在黏性流体管内交变流动中必然存在速度环状效应,并且在流道截面中心速度为零相位下最容易观察到速度环状效应．为了定量描述速度环状效应,根据流道中心速度为零相位下的速度分布曲线的斜率情况,提出定量评价指标速度环状效应系数,并针对平行平板流道内层流交变流动,利用该评价指标定量分析了无量纲参数（包括瓦伦西数Va和最大雷诺数Remax）对速度环状效应的影响．