利用全反射原理测定水的折射率

介绍一种利用全反射原理测定水的折射率的方法。实验中利用He-Ne激光束在水底产生点光源,根据全反射原理对水底的暗影和水深进行测量,求出水的折射率。     

砂土地基锚板基础抗拔承载力PFC数值分析

在模型试验的基础上,采用PFC离散单元法对条形锚板基础在中密砂土地基中的抗拔性能进行了数值分析。数值模拟采用簇颗粒单元来模拟砂粒的不规则形状,颗粒级配根据模型试验福建标准砂的级配按照相似级配法生成,细观参数根据数值双轴试验确定。水平锚板数值模拟结果与模型试验结果基本一致。与模型试验结果相比,颗粒流数值模拟能得到颗粒间接触力链的分布及其演化规律,能从细观角度来探明宏观抗拔承载力特性的演化机理。在此基础上对倾斜锚板上拔过程进行了模拟,分析了锚板前后砂粒的运动趋势以及接触力链的演化规律,并与已有承载力结果进行了对比分析。     

Majorana零模式的电导与低压振荡散粒噪声

Majorana零能量模式是自身的反粒子,在拓扑量子计算中有重要应用.本文研究量子点与拓扑超导纳米线混合结构,通过量子点的输运电荷检测Majorana零模式.利用量子主方程方法,发现有无Majorana零模式的电流与散粒噪声存在明显差别.零模式导致稳态电流差呈反对称,在零偏压处显示反常电导峰.电流差随零模式分裂能的增大而减小,随量子点与零模式耦合的增强而增大.另一方面,零模式导致低压散粒噪声相干振荡,零频噪声显著增强.分裂能导致相干振荡愈加明显且零频噪声减小,而量子点与零模式的耦合使零频噪声增强.当量子点与电极非对称耦合时,零模式使电子由反聚束到聚束输运,亚泊松噪声增强为超泊松噪声.稳态电流差结合低压振荡的散粒噪声能够揭示Majorana零模式是否存在.     

锚泊状态下船载测控系统对塔相位标校研究

航天器海上测量船是搭载着船载测控系统的海上平台,主要完成对目标的海上测控任务。测量船在新建之时或大修之后均要对搭载的测控系统进行标校,主要是进行海上合作目标校飞。海上校飞过程中锚泊状态下天线对塔相位标校必不可少,对此进行研究有助于提高锚泊状态下对塔相位标校过程的认识,提升船载测控系统的标校精度。研究过程首先分析了我国测量船所采用的差模双通道单脉冲雷达的跟踪原理和天线对塔校相原理,然后再结合锚泊状态下大型海上测量船的运动规律,建立了船体运动对锚泊状态下对塔校相精度影响的数学模型,最后在远场条件下对数学模型进行了的仿真,分析了测量船锚泊时不同运动模式对相位标校的影响,并进一步给出了锚泊状态下船载测控天线对塔校相的建议。     

岩质边坡稳定性及预应力锚固分析现状

本文首先对目前常用的各类边坡稳定性分析方法的主要特点进行了评述,包括定性方法类的历史分析法、工程地质类比法、图解法、专家系统法,定量分析方法类的确定性模型法,如极限平衡法,应力应变分析法;非确定性模型法,如可靠性分析法、灰色系统理论法及模糊综合评判法等;及两类方法结合而成的随机有限元法。其次,对预应力锚固边坡的设计及稳定性分析作了阐述。     

Total synthesis of a glycosylphosphatidylinositol anchor of the human lymphocyte CD52 antigen

The first total synthesis of a glycosylphosphatidylinositol (GPI) anchor bearing a polyunsaturated arachidonoyl fatty acid is reported. This lipid is found in mammalian GPIs that do not undergo lipid remodeling, a process that has important implications in the localization and function of GPI-anchored proteins. Incorporation of the oxidation- and reduction-sensitive arachidonoyl lipid in the target GPI was accomplished by using the para-methoxybenzyl (PMB) group for permanent hydroxyl group protection, which featured a selective, rapid, and efficient global deprotection protocol. The flexibility of this synthetic strategy was further highlighted by the inclusion of two additional GPI core structural modifications present in the GPI anchor of the human lymphocyte CD52 antigen.     

Two Dimensions Residual Stresses Analysis Through Incremental Groove Machining Combined with Electronic Speckle Pattern Interferometry

In this study a new residual stress determination method in two directions simultaneously is presented. This method is based on stresses relaxation in a groove that is machined incrementally. The residual stresses relaxation occurs simultaneously from both the depth and the length of the groove. Thus, measuring the surface strain field generated by the relaxation enables to determine the stress gradient both along the depth and the length of the groove. To measure the surface strain in a direction perpendicular to the groove, a digital speckle pattern interferometer is used. This method is suitable when the residual stress field in the structure varies in the depth as well as along the surface of the part, like for example in a welded structure. The method is tested here on an aluminium plate in which a central band has been shot peened.     

三类锚杆受拉作用解析解的统一表达式

利用点荷载作用于半无限空间的Mindlin位移解,根据位移协调条件得出内锚式锚杆受拉作用的解析解,然后推导出全长粘结锚杆、压力型锚杆的解析解,建立了这3类锚杆受拉作用解析解的统一表达式.利用所求得的解析解,研究了锚杆类型、土体弹性模量、锚杆孔径对锚杆应力分布的影响.结果表明:(1)3类锚杆的剪应力都是单峰值的曲线;(2)土体弹性模量增大,则锚杆剪应力峰值增大,但分布范围减小;(3)锚杆孔径增大,则锚杆剪应力峰值减小,但对其分布范围几乎没有影响.     

Use of the hole-drilling method for measuring residual stresses in highly stressed shot-peened surfaces

The same shot-peening treatment was applied to five steels with different mechanical properties. The induced residual stress profiles were analyzed using X-ray diffraction and incremental hole drilling (IHD). The results of both techniques showed that IHD can still be successfully used for measuring shot-peening residual stresses, even if these exceed the yield strength of the bulk material. Expected errors due to the plasticity effect are reduced by the strain hardening of the surface. For an assessment of the reliability of IHD data, strain-hardening variation was quantified by microhardness measurements to estimate the yield strength of the plastified layer. All the main calculation methods for IHD were applied. The results were compared and discussed with respect to the characteristics of each method.     

单链系泊浮体受外碰撞时的锚链动态张力

介绍系泊浮体受外碰撞时锚链动态张力计算方法,并对动态张力的若干问题进行了讨论．