Electrode “edge effects” analyzed by the Green function method

An exact method based on Green's equation is used to find the diffusion-controlled faradaic current for certain electrode geometries that incorporate edges and vertices. Thereby the magnitudes of the time-independent current density associated with angled electrode/electrode and electrode/insulator junctions are calculated. As well, the square-root-of-time-dependent currents associated with vertices, receive attention. These terms extend to longer times, the Cottrell formulation appropriate for short times. Though most of the problems solved here have been tackled previously, the novel Green function approach is shown to be straightforward and intuitive.     

Cu-MgF2复合纳米金属陶瓷薄膜的电导特性研究

用射频磁控共溅射法制备了Cu体积分数分别为 10 % ,15 % ,2 0 %和 3 0 %的Cu MgF2 复合金属陶瓷薄膜 .用x射线衍射、x射线光电子能谱和变温四引线技术对薄膜的微结构、组分及电导特性进行了测试分析 .微结构分析表明 :制备的Cu MgF2 复合薄膜由fcc Cu晶态纳米微粒镶嵌于主要为非晶态的MgF2 陶瓷基体中构成 ,Cu晶粒的平均晶粒尺寸随组分增加从 11 9nm增至 17 8nm .5 0— 3 0 0K温度范围内的电导测试结果表明 :当Cu体积分数qM 由 15 %增加到 2 0 %时 ,Cu MgF2 复合薄膜的电阻减小了 8个量级 ,得出制备的复合薄膜渗透阈qCM 应处于 15 %和 2 0 %之间 .qM 在 10 %和 15 %之间的薄膜呈介质导电状态 ,而在 2 0 %和 3 0 %之间的薄膜则呈金属导电状态 .从理论上讨论了复合薄膜中杂质电导和本征电导的激活能及其对电导的贡献 ,并讨论了Cu MgF2 复合纳米金属陶瓷薄膜的渗透阈 ,得到了和实验一致的结果     

Performance of noise barriers with various edge shapes and acoustical conditions

The performances of barriers having different shapes and surface conditions were tested using the boundary element method in a well-controlled environment. The heights and widths of the barriers were standardized and the insertion losses for six receiver positions were averaged and compared. Figures displaying the results allow for straightforward barrier performance estimation. It was shown that absorbing and soft edges significantly improve the efficiency of the barrier, but configuration modifications provide only a slight improvement. The soft T-shaped barrier produces the highest performance. A 3 m high T-shaped barrier provides the same performance as a 10 m high plain barrier. The spectral efficiency was also investigated. The insertion loss spectra for the absorbing and the soft barriers exhibit a similar shape, but the rigid barrier differs from these two.     

Study of solar features causing GMSs with 250γ<<Emphasis Type="Italic">H</Emphasis><400γ

The effect of solar features on geospheric conditions leading to geomagnetic storms (GMSs) with planetary index,A ^P ≥ 20 and the range of horizontal component of the Earth’s magnetic fieldH such that 250γ <H < 400γ has been investigated using interplanetary magnetic field (IMF), solar wind plasma (SWP) and solar geophysical data (SGD) during the period 1978–99. Statistically, it is observed that maximum number of GMSs have occurred during the maximum solar activity years of 21st and 22nd solar cycles. A peculiar result has been observed during the years 1982, 1994 when sunspot numbers (SSNs) decrease very rapidly while numbers of GMSs increase. No distinct association between yearly occurrence of disturbed days and SSNs is observed. Maximum number of disturbed days have occurred during spring and rainy seasons showing a seasonal variation of disturbed days. No significant correlation between magnitude (intensity) of GMSs and importance ofH _α , X-ray solar flares has been observed. Maximum number of GMSs is associated with solar flares of lower importance, i.e., SF during the period 1978-93.H _α , X-ray solar flares occurred within lower helio-latitudes, i.e., (0–30)°N to (0–30)°S are associated with GMSs. NoH _α , X-ray solar flares have occurred beyond 40°N or 40°S in association with GMSs. In helio-latitude range (10–40)°N to (10–40)°S, the 89.5% concentration of active prominences and disappearing filaments (APDFs) are associated with GMSs. Maximum number of GMSs are associated with solar flares. Coronal mass ejections (CMEs) are related with eruptive prominences, solar flares, type IV radio burst and they occur at low helio-latitude. It is observed that CMEs related GMS events are not always associated with high speed solar wind streams (HSSWSs). In many individual events, the travel time between the explosion on the Sun and maximum activity lies between 58 and 118 h causing GMSs at the Earth.     

Optimal control of the obstacle in a quasilinear elliptic variational inequality

In this paper we consider an obstacle control problem where the state satisfies a quasilinear elliptic variational inequality and the control function is the obstacle. The state is chosen to be close to the desire profile while the H² norms of the obstacle is not too large. Existence and necessary conditions for the optimal control are established.     

Furtivity and Masking Problems in Time-Dependent Electromagnetic Obstacle Scattering

In this paper, we consider furtivity and masking problems in time-dependent three-dimensional electromagnetic obstacle scattering. That is, we propose a criterion based on a merit function to minimize or to mask the electromagnetic field scattered by a bounded obstacle when hit by an incoming electromagnetic field and, with respect to this criterion, we drive the optimal strategy. These problems are natural generalizations to the context of electromagnetic scattering of the furtivity problem in time-dependent acoustic obstacle scattering presented in Ref. 1. We propose mathematical models of the furtivity and masking time-dependent three-dimensional electromagnetic scattering problems that consist in optimal control problems for systems of partial differential equations derived from the Maxwell equations. These control problems are approached using the Pontryagin maximum principle. We formulate the first-order optimality conditions for the control problems considered as exterior problems defined outside the obstacle for systems of partial differential equations. Moreover, the first-order optimality conditions derived are solved numerically with a highly parallelizable numerical method based on a perturbative series of the type considered in Refs. 2–3. Finally, we assess and validate the mathematical models and the numerical method proposed analyzing the numerical results obtained with a parallel implementation of the numerical method in several experiments on test problems. Impressive speedup factors are obtained executing the algorithms on a parallel machine when the number of processors used in the computation ranges between 1 and 100. Some virtual reality applications and some animations relative to the numerical experiments can be found in the website http://www.econ.unian.it/recchioni/w10/.     

Sufficient Stochastic Maximum Principle for the Optimal Control of Jump Diffusions and Applications to Finance

We give a verification theorem by employing Arrow's generalization of the Mangasarian sufficient condition to a general jump diffusion setting and show the connections of adjoint processes to dynamic programming. The result is applied to financial optimization problems.     

基于部分变量反馈的混沌系统控制

提出了混沌系统部分变量逆序反馈控制器的定义，并以陈氏系统为例对该类控制器进行了研究，得出了部分变量正序和逆序控制器存在的条件，应用该条件扩展了有关文献的研究成果，得到了混沌系统的多种形式的反馈控制器.仿真结果显示，基于部分变量的混沌系统的控制是简单而有效的. 关键词： 部分变量反馈控制 逆序控制器 混沌系统     

An existence theorem for neutral variational problems of Bolza

This note proves an existence theorem for a generalized Bolza-type problem that has time delays in both the state and velocity variables. The assumptions are stated in terms of a modification of the classical Hamiltonian, and extend ideas of Rockafellar to the delay case.     

Simultaneous determination of cloramphenicol, salicylic acid and resorcinol by capillary zone electrophoresis and its application to pharmaceutical dosage forms

This study demonstrates the separation of active ingredients in acne formulations (salicylic acid, cloramphenicol and resorcinol in presence of azulene) by capillary zone electrophoresis. Factors affecting their separations were the buffer pH and concentration, applied voltage, sample preparation, and presence of additives. Optimun results were obtained with a 50 mM sodium tetraborate-50 mM sodium phosphate, pH 9.0. The carrier electrolyte gave baseline separation with good resolution, short migration times (<6 min), great reproducibility and accuracy. Calibration plots were linear over at least three orders of magnitude of analyte concentrations, the lower limits of detection being within the range 0.39-1.25 μg ml⁻¹. The procedure was fast and reliable and commercial pharmaceuticals could be analysed without prior sample clean-up procedure.