拖曳线列阵用光纤水听器的研究

报道了光纤水听器用于拖曳线列阵的研究结果。在保证光纤水听器声相位灵敏度的前提下, 优化设计了光纤水听器的结构,降低了光纤水听器的加速度灵敏度36dB。实验测得在20-1600Hz 频段,该光纤水听器的相位灵敏度为-162．7dB,频段内灵敏度的起伏为±0．7dB,加速度灵敏度小于-30dB。     

用拉盖尔-高斯激光对真空中电子直接加速

对用拉盖尔-高斯(LG)光束加速电子作了研究.结果表明，仅模指数为p和l=1的LG光束的纵向电场可用于加速电子.模指数为p和l=1的线偏振和圆偏振LG光束都对电子有加速效果.对轴上光场的相速度和群速度以及电子能量增益等物理特征作了讨论.给出了轴上光场的相速度和群速度、加速电位及电子能量增益等的解析表达式，并作了数值计算和分析. 关键词： 激光电子加速 拉盖尔-高斯光束 线偏振和圆偏振 能量增益     

气垫导轨上运动物体加速度测量方法的改进

利用计数计时测速仪测量气垫导轨上滑块运动的加速度,其测量精度直接依赖于2个光电门之间距离的测量,而在实验中该距离的测量往往不易达到很高的精度,致使加速度的测量精度不高.对计数计时测速仪的电路和单片机程序稍加修改,使之能测出滑块从一个光电门运动到另一个光电门所需时间,就无需测量2个光电门之间的距离,因而提高了加速度的测量精度,节约单片机的资源并缩短运行时间.     

Two-axis-scanning laser Doppler vibrometer for precision engineering

Laser Doppler vibrometer (LVD) has been the most favorite instrument for precision dynamics measurement due to its non-contact, high accuracy and high resolution. However, LDV can only give the dynamic data of a particular location on the entire feature. In order to get the whole field data, a laser beam-scanning mechanism has to be implemented. Currently, motor-driven scanning mirror is used to move the measurement probe from one point to another. The mechanical vibrations of the scanning mirror will reduce the measurement accuracy. This paper introduces a novel scanning LDV optical system embodied in an acousto-optic deflector scanning mechanism. It can improve the measurement accuracy since there is no mechanical motion involved. One main advantage of this system is that it generates a laser scanning beam in parallel that is different from the beam scanning in the conventional scanning laser Doppler vibrometer (SLDV). The new system has a board scanning range. The measurement target size ranges from few tens of millimeters down to 10 μm. We have demonstrated the capability of the novel system on scanning measurements of features as big as ultra-precision cutting tool to features as tiny as AFM cantilever. We believe that the novel SLDV will find profound potential applications in the precision engineering field.     

振动谱学研究中的光谱线型函数

本文讨论了在振动谱带计算拟合处理中的光谱线型函数问题,推导出适用于单道及多道拉曼光谱仪及色散型红外谱仪谱带线型公式。通过实验及拟合计算证实了它们的适用性并讨论了可能的误差源。理论计算和实验验证结果说明:在振动谱的谱带拟合计算中,应使用根据测谱条件计算求得的谱带线型函数,以保证拟合结果的可靠性。     

低噪音摩阻复台材料影响因素的探讨

采用动态粘弹谱仪（ＤＤＶ）、电子扫描显微镜（ＳＥＭ）和摩擦试验机等对影响摩阻复合材料制动噪音的因素进行了探讨。结果表明，摩阻材料基体的合理改性以提高其损耗角正切ｔａｎδ对减少振动、降低噪音行之有效。同时对传统解决噪音的方法，如添加固体润滑剂、橡胶共混等进行了分析比较。     

Accelerated glycosylation under frozen conditions

O-Glycosylations using thiomethyl glycosides as donors were compared under both frozen and unfrozen conditions. In the presence of MeOTf as a promoter, enormous rate acceleration was observed when the glycosylation was conducted in p-xylene below its freezing point.     

Separation of piano keyboard vibrations into tonal and broadband components

A new method is presented for splitting musical notes into tonal and broadband components by removing the harmonic peaks from the spectra. This method was used to analyse the key vibrations of eight pianos (four grand and four upright). The broadband component of vibrations was found to be more intense in the upright pianos than in the grand pianos, while no such difference was found in the tonal component. As grands are considered to be superior to uprights, this suggests that it may be possible to improve upright pianos by reducing the strength of the broadband component of vibrations.     

Experimental verification of drop/impact simulation for a cellular phone

Conducting drop tests to investigate impact behavior and identify failure mechanisms of small-size electronic products is generally expensive and time-consuming. Nevertheless, strict drop/impact performance criteria for hand-held electronic products such as cellular phones play a decisive role in the design because they must withstand unexpected shocks. The design of product durability on impact has heavily relied on the designer's intuition and experience. In this study, a reliable drop/impact simulation for a cellular phone is carried out using the explicit code LS-DYNA. Subsequently globallocal experimental verification is accomplished by means of high-speed photography and impact response measurement. Using this methodology, we predict potential damage locations in a cellular phone and compare them with real statistical data. It is envisaged that development of a reliable methodology of drop/impact simulation will provide us with a powerful and efficient vehicle for improvement of the design quality and reduction of the product development cycle.     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006