SSIMS analysis of organics, polymer blends and interfaces

This paper gives a critical review on the applications of ToF SIMS in the areas of polymer additive characterization and in the study of polymer blends and interfaces. Polymer additives can readily be identified by ToF SIMS using their parent molecular ions or characteristic fragments. This analytical capability has been successfully applied to monitor the migration or segregation of additives during polymer processing. ToF SIMS is an ideal analytical tool for the study of polymer blends and interfaces because it is able to provide information on both surface composition and morphology. In combination with other analytical techniques such as AFM and XPS, ToF SIMS chemical imaging capability has opened up new horizons in the investigation of complex polymer blend systems. Finally the main advantages and limitations of ToF SIMS in these application areas are also discussed.     

Nondestructive in‐depth composition profile of oxy‐hydroxide nanolayers on iron surfaces from ARXPS measurement

In this work the maximum entropy method (MEM) is applied, for the first time, to angle‐resolved X‐ray photoelectron spectroscopy (ARXPS) data from oxy‐hydroxide films on iron surfaces. This nondestructively derives information on the in‐depth distribution of the composition and chemical state. An MEM algorithm was created and first tested on the simulated data. The reconstructed composition depth profiles agreed very well with the theoretical ones up to 5% Gaussian noise added to the data. The same algorithm was then applied to ARXPS data from iron samples to investigate the in‐depth variations in the composition and chemical state of the nanosized oxy‐hydroxide film naturally grown on the iron surface. The resulting surface film presents a complex multilayer structure with concentration gradients. The effect of air exposure on the structure was also investigated. Copyright © 2006 John Wiley & Sons, Ltd.     

Photoluminescence study in step-graded composition InxAl1−xAs/GaAs

We report on the lattice-mismatched growth of step-graded In_xAl_1−xAs buffer layers on GaAs (0 0 1) substrates by molecular beam epitay (MBE). The approach to growing highly lattice-mismatched epilayers is to interpose a buffer layer between the substrate and the active layer. Two samples G30 and G40 with active layer compositions, respectively, x = 0.46 and x = 0.41, are studied by photoluminescence (PL). At low temperature, the PL spectra show a large broadened band whose energy and intensity depend on the active layer composition. The step-graded layer compositions improved the crystalline quality of these structures and increase the active layer PL band intensity.     

布尔“复合函数”的Walsh循环谱和自相关函数

本文利用布尔随机变量联合分布的分解式给出了布尔“复合函数”和某布尔函数符合率的分解算式,由此求得了布尔“复合函数”的 Walsh循环谱和自相关函数的计算公式,公式清楚地表明了“复合”所得布尔函数的 Walsh循环谱与起“复合”作用的函数和被“复合”的各函数所有线性组合的 Walsh循环谱之间的关系、“复合”所得布尔函数的自相关函数与起“复合”作用的函数谱和被“复合”的各函数的谱及相关函数之间的关系,这两个公式在布尔函数的密码学性质研究中会有广泛的应用.     

Reactivity of a Ti–45.9Al–8Nb alloy in air at 700–900°C

A Ti–45.9Al–8Nb (at%) alloy with a lamellar structure (γ+α₂) was oxidised in air at 700, 800, 850 and 900°C in isothermal and thermal cycling conditions. The reaction progress was followed by thermogravimetric measurements. In isothermal conditions the oxidation kinetics followed approximately a parabolic rate law and the rate constants ranged from about 10^–12 kg² m^–4 s^–1 at 700°C to 10^–10 kg² m^–4 s^–1 at 900°C. The oxide scales were built of Al₂O₃ and TiO₂, the former being the main component of the outermost layer. The oxidation behaviour of Ti–45.9Al–8Nb was referred to a commercial titanium alloy, WT4 (Ti–6Al–1Mn), and selected oxidation-resistant alloys.     

单位球上不同Privalov空间之间的复合算子

利用η-Carleson测度给出了单位球上不同Privalov以及不同加权Bergman-Privalov空间之间的复合算子是度量有界或度量紧的充要条件,并给出了一些函数理论方面的刻画．     

Cu-MgF2复合纳米金属陶瓷薄膜的电导特性研究

用射频磁控共溅射法制备了Cu体积分数分别为 10 % ,15 % ,2 0 %和 3 0 %的Cu MgF2 复合金属陶瓷薄膜 .用x射线衍射、x射线光电子能谱和变温四引线技术对薄膜的微结构、组分及电导特性进行了测试分析 .微结构分析表明 :制备的Cu MgF2 复合薄膜由fcc Cu晶态纳米微粒镶嵌于主要为非晶态的MgF2 陶瓷基体中构成 ,Cu晶粒的平均晶粒尺寸随组分增加从 11 9nm增至 17 8nm .5 0— 3 0 0K温度范围内的电导测试结果表明 :当Cu体积分数qM 由 15 %增加到 2 0 %时 ,Cu MgF2 复合薄膜的电阻减小了 8个量级 ,得出制备的复合薄膜渗透阈qCM 应处于 15 %和 2 0 %之间 .qM 在 10 %和 15 %之间的薄膜呈介质导电状态 ,而在 2 0 %和 3 0 %之间的薄膜则呈金属导电状态 .从理论上讨论了复合薄膜中杂质电导和本征电导的激活能及其对电导的贡献 ,并讨论了Cu MgF2 复合纳米金属陶瓷薄膜的渗透阈 ,得到了和实验一致的结果     

从B~0到E(p，q)和E_0(p，q)空间的复合算子(英文)

设φ是单位园盘D到自身的解析映射,X是D上解析函数的Banach空间,对f∈X,定义复合算子C_φ∶C_φ)(f)=fφ．我们利用从B~0到E(p,q)和E_0(p,q)空间的复合算子研究了空间E(p,q)和E_0(p,q),给出了一个新的特征．     

Ratio of Protein Fractions in Cereal Grains Cultivated in Uzbekistan

The glutelin fraction was used as the food value index of local corn. The base-soluble fraction was used as a test of the glassiness of local strains of rice grain. The content of gliadins and glutelins did not change over 24 h after wheat grain cultivated in Uzbekistan was moistened.     

三角B\''{e}zier曲面和四边B\''{e}zier曲面之间的相互转化

B\'{e}zier曲面有两种不同的形式:三角B\'{e}zier曲面和四边B\'{e}zier曲面,它们有着不同的基底和不同的几何拓扑结构, 但是它们也有很多共同的性质,因此三角B\'{e}zier曲面和四边B\'{e}zier曲面之间的相互转化就成为CAGD 里一个重要研究课题.在本文中, 我们用函数复合的方法实现两者之间的相互转化.被复合的两个函数, 一个用Polar形式表示,另一个用常见的Bernstein基形式表示.