Acrylic acid level and adhesive performance and peel master‐curves of acrylic pressure‐sensitive adhesives

Three series of pressure‐sensitive adhesives were prepared with constant glass‐transition temperature, using emulsion polymerization. The monomers chosen were butyl acrylate, 2‐ethylhexyl acrylate (EHA), methyl methacrylate (MMA), and acrylic acid (AA). Within each polymer series, the proportion of AA monomer was held constant for each polymer preparation but acrylic ester monomer levels were varied. Adhesion performance was assessed by measurement of loop tack, static shear resistance, and through the construction of peel master‐curves. Peel master‐curves were generated through peel tests conducted over a range of temperatures and peel rates and through application of the time–temperature superposition principle. Bulk effects dominated by polymer zero shear viscosity change as AA and EHA levels were varied were attributed to the observed effect on static shear resistance and the horizontal displacements of peel master‐curves. Static shear resistance was found to strongly correlate with log(a_C), a parameter introduced to horizontally shift peel master‐curves to form a superposed, “super master‐curve”. An interfacial interaction was proposed to account for deviations observed when loop tack was correlated with log(a_C). Surface rearrangements via hydrogen bonding with the test substrate were suggested as responsible for the interfacial interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1237–1252, 2006     

Magnetic phase transitions in nanostructures induced by shear stress under high pressure

Magnetic phase transitions of the first and second order were revealed by Mössbauer spectroscopy in nanosystems of - and -ferric oxides and metallic europium subjected to shear stress (240°) under high pressure (20 kbar). For - and -ferric oxide nanoclusters, the Curie (Neel) points decreased to 300 K, whereas for nanostructured europium the Neel point increased from 90 to 100 K. The thermodynamic model of magnetic phase transitions predicting a change in the character of magnetic phase transitions and a decrease (increase) in the critical Neel (Curie) points in nanoclusters was developed. The type of magnetic phase transitions and the change in the critical points were caused by defects in nanoclusters, whose maximum concentration was observed for the clusters with the 20—50 nm size range.     

Theory of oscillatory experiments with a coaxial cylinder viscometer

Equations are derived for the coaxial cylinder system in the combined oscillatory and steady-state shear mode. The limitations of the use of the various equations are presented. If the usual linear equations are used, the main limitation, in the case of oscillatory shear only, is that the frequency of measurement should be below 0.016 | ^*|/(r ₂ –r ₁ )². Here | ^*| is the modulus of the complex viscosity, is the density of the liquid andr ₁ andr ₂ are the radii of the cylinders. Furthermore it is shown that there is a small error in the numerical factor of the usually applied equations. The calculations are set up in such a way that extension to higher harmonics follows in a natural way. An experimental example illustrates the use of the derived equations.     

The interface of the Ising model and the Brownian sheet

We study the limit theorem related to the interface of the three-dimensional Ising model. Dobrushin proved that the interface does not fluctuate and becomes rigid for sufficiently large. We define the random fieldX ^L (t, s), 0t, s1, on the interface, and prove that X^L(t, s) converges to the Brownian sheet as L for sufficiently large, whereL denotes the size of the system. This result does not mean that the interface itself converges to the Brownian sheet.     

Rheology of polystyrene solutions around the coil overlapping concentration: A phenomenological description of stresses in simple shear flow

Linear viscoelasticity behavior is described with the sum of two terms for polystyrene solutions in tricresyl phosphate around the coil overlapping concentration (K. Osaki, T. Inoue, & T. Uematsu, J Polym Sci Part B: Polym Phys 2001, 39, 211). One is a Rouse–Zimm (RZ) term represented by the Zimm theory with arbitrarily chosen values of the hydrodynamic interaction parameter and the longest relaxation time (τ_RZ). The other (the L term) consists of a relaxation mode with a single relaxation time (τ_L > τ_RZ) and a high‐frequency limiting modulus proportional to the square of the concentration. In this study, we describe the viscosity (η) and first normal stress coefficient (Ψ₁) in steady shear with simple formulas. The stress due to the L term is assumed to be given by a Kaye, Bernstein, Kearsley, and Zapas (K‐BKZ) equation with the damping function h(γ) = (1 + 0.2γ²)^?1/2, where γ is the magnitude of shear. Contributions to η and Ψ₁ from the RZ term are derived from the RZ model, in which the relaxation time in steady flow is given by τ_st = τ + (τ_RZ ? τ)/(1 + 0.35τ_RZ γ˙) instead of τ_RZ. Here, γ˙ is the rate of shear, and τ is the τ_RZ value at the infinite dilution limit. η and Ψ₁ at various concentrations for two polystyrene samples (with molecular weights of 2890 and 8420 kg mol^?1) are well described with parameters derived from dynamic viscoelasticity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1038–1045, 2002     

Momentum transfer in an agitated vessel with off-centred impellers

Momentum transfer was investigated in an unbaffled agitated vessel of inner diameter 0.3 m equipped with different off-centred impellers. The distribution of the shear rate on the tank wall as a function of the impeller type and Reynolds number was studied in the turbulent regime of the Newtonian liquid flow. The dependences of the averaged dimensionless shear rate, friction coefficient, and dissipated energy on the Reynolds number and eccentricity ratio were approximated using four-parameter equations. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

考虑壁面滑移的Z-W流变模型及其应用

总结了聚合物熔体在剪切溶场壁面滑移研究的成果，提出了Z－W模型的物理概念。该模型考虑了界面分子链和固体壁面间解吸－吸附而发生的滑移。界面分子链和内部分子链间解缠－重新缠结而发生的表观滑移以及变形摩擦滑移。在稳态简单剪切流运过程，模型可以化简为应力和应变的二次微分方程，说明了壁面滑移来源于Cohesive滑移和Adhesive滑移两部分，对于自激振荡相关的多重内振荡和多重外振荡进行了归纳，应用统一模型定性地解释了毛细管实验中剪切应力的非线性，瞬态自激振荡、滑－粘转换和鲨鱼皮等现象，在聚合物熔体振动剪切流动（LAOS）中，统一模型可以简化为杜芬方程，通过模拟发现，该模型可解释小应变振幅下振动剪切时的线性流变行为和在大振幅振动流动中的复杂非线性行为。非线性行为与熔体粘弹性以及近壁面界面层的性质有关，统一模型在特殊情况下还可以简化Joshi模型，结构网络模型，Hatzikiriakos或等效的Graham模型，可见，Z－W模型内内涵比较丰富，适用面较广，也从一个侧面说明该模型具有相当的合理性。     

Mercerization of primary wall cellulose and its implication for the conversion of cellulose I→cellulose II

The mercerization of homogenized primary wall cellulose extracted fromsugar beet pulp was investigated by transmission electron microscopy (TEM),X-ray diffraction together with ¹³C CP-MAS NMR, and FT-IR spectroscopy.For samples resulting from acid extraction, mercerization began at 9% NaOH, whereasfor samples purified by alkaline treatment, the mercerization started at 10%NaOH. The change in morphology when going from cellulose I to cellulose II wasspectacular, as all the microfibrillar cellulose morphology disappeared duringthe treatment. This change in morphology was very drastic as soon as the NaOHconcentrations were increased beyond 8 and 9% for the acid and alkalinepreparedsamples, respectively. On the other hand, the conversion was found to be moreprogressive in terms of increasing NaOH concentration when the transformationwas analyzed by X-ray diffraction or spectroscopy. Our observations of themercerization of isolated cellulose microfibrils are consistent with theconceptof cellulose microfibrils made of parallel chains in cellulose I and crystalsofcellulose II consisting of antiparallel chains.     

Real-time onboard wind and windshear determination,part 2: Detection

This paper is concerned with windshear detection in connection with real-time wind identification (Ref. 1). It presents a comparative evaluation of two techniques, one based on the shear/downdraft factor and one based on the wind difference index. The comparison is done with reference to a particular microburst, that which caused the 1985 crash of Flight Delta 191 at Dallas-Fort Worth International Airport.The shear/downdraft factor has the merit of combining the effects of the shear and the downdraft into a single entity. However, its effectiveness is hampered by the fact that, in a real situation, the windshear is accompanied by free-stream turbulence, which tends to blur the resulting signal. In turn, this results in undesirable nuisance warnings if the magnitude of the shear factor due to free-stream turbulence is temporarily larger than that due to true windshear. Therefore, proper filtering is necessary prior to using the shear/downdraft factor in detection and guidance. One effective way for achieving this goal is to average the shear/downdraft factor over a specified time interval . The effect of on the average shear/downdraft factor is studied.