Base-freie Tris(trimethylsilyl)methyl-Derivate des Lithiums,Aluminiums, Galliums und Indiums

Base-free Tris(trimethylsilyl)methyl Derivatives of Lithium, Aluminium, Gallium, and Indium Base-free LiR* (R*=-C(SiMe₃)₃) has been prepared from R*Cl and Li-metal in toluene at 85?90°C and used to synthesize the metallanes R*MMe₂ with M = Al, Ga and In, respectively. The NMR (¹H, ¹³C, ²⁹Si) and the vibrational spectra of these trisyl compounds have been discussed. AlCl₃ and LiR*(ratio 1 : 1) forms the metallate metallate Li[R*AlCl₃]. The triclinic unit cell (space group P1 ) consists of a centrosymmetric assoziate, formed by four Li[R*AlCl₃]- units with Al? Cl…?Li bridges, two pairs of Li-atoms differing in their chlorine-coordination and two disordered toluene molecules, inserted in the crystal lattice (R₁wR₂ =0,0444/0,1072). The reaction of GaCl₃ with LiR* (I :1) gives the unusual sesquichloride (R*Ga(Cl_1,33)Me_0,67)₃ in moderate yield. The X-ray structure determination shows a Ga₃Cl₃-skeleton with chairconformation and disordered, terminal gallium ligands (R₁/wR₂= 0,0646/0,2270).     

Ternäre Halogenide vom Typ A3MX6. IV. [1]. Ternäre Halogenide des Scandiums mit Natrium,Na3ScX6 (X = F,Cl, Br): Synthese,Strukturen, Ionenleitfähigkeit

Ternary Halides of the A₃MX₆ Type. IV. Ternary Halides of Scandium with Sodium, Na₃ScX₆ (X = F, Cl, Br): Synthesis, Structures, Ionic Conductivity X-ray studies on single crystals of Na₃ScF₆ and Na₃ScBr₆ show, that Na₃ScF₆ crystallizes with the cryolite type (monoclinic, P2₁/n, Z = 2, a = 560.16(9), b = 580.31(8), c = 812.1(2)pm, β = 90.720(14)°) and Na₃ScBr₆, as the only ternary bromide of the rare earth elements with sodium, in the Na₃CrCl₆ type (trigonal, P3 1c, Z = 2, a = 728.95(7), c = 1309.29(17)pm). The ionic conductivity of powder samples of Na₃ScF₆, Na₃ScBr₆ and of Na₃ScCl₆ was studied by impedance spectroscopy. Activation energies were determined as 1.22 eV, 0.80 eV and 0.71 eV for the fluoride, chloride and bromide, respectively. The differences are explained from the crystal structures and the sizes and polarizabilities of the anions.     

Zur Bildung und Struktur der Phosphinophosphiniden-phosphorane tBu2P?PP(Me)tBu2 1, tBu(Me3Si)P?PP(Me)tBu2 2 und tBu2P?PP(Br)tBu2 3

Synthesis and Structure of Phosphinophosphinidene-phosphoranes tBu₂P? P?P(Me)tBu₂ 1, tBu(Me₃Si)P? P?P(Me)tBu₂ 2, and tBu₂P? P?P(Br)tBu₂ 3 A new method for the synthesis of 1 and 2 (Formulae see ?Inhaltsübersicht”?) is reported based on the reaction of 5 with substitution reagents (Me₂SO₄ or CH₃Cl). The results of the X-ray structure determination of 1 and 2 are given and compared with those of 3 . While in 3 one P? P distance corresponds to a double bond and the other P? P distance to a single bond (difference 12.5 pm) the differences of the P? P distances in 1 and 2 are much smaller: 5.28 pm in 1 , 4.68 pm in 2 . Both 1 and 2 crystallize monoclinic in the space group P2₁/n (Z = 4). 2 additionally contains two disordered molecules of the solvent pentane in the unit cell. Parameters of 1 : a = 884.32(8) pm, b = 1 924.67(25) pm, c = 1 277.07(13) pm, β = 100.816(8)°, and of 2 : a = 1 101.93(12) pm, b = 1 712.46(18) pm, c = 1 395.81(12) pm, β = 111.159(7)°, all data collected at 143 K. The skeleton of the three P atoms is bent (PPP angle 100.95° for 1 , 100.29° for 2 and 105.77° for 3 ). Ab initio SCF calculations are used to discuss the bonding situation in the molecular skeleton of the three P atoms of 1 and 3 . The results show a significant contribution of the ionic structure R₂P? P(^?)? P(⁺)(X)R₂. The structure with (partially) charged P atoms is stabilized by bulky polarizable groups R (as tBu) as compared to the fully covalent structure R₂P? P(X)? PR₂.     

Synthesen und Kristallstrukturen von [Pd9As8(PPh3)8] und [Pd9Sb6(PPh3)8]

Syntheses and Crystal Structures of [Pd₉As₈(PPh₂)₈] and [Pd₉Sb₆(PPh₃)₈] [PdCl₂(PPh₃)₂] reacts with As(SiMe₃)₃ to give the new cluster [Pd₉As₈(PPh₃)₈] ( 4 ). 4 has been characterized by X-ray crystal structure analysis. It is a molecule in which four [Pd₂(PPh₃)₂]-units are bridged by As₂-units. A further Pd atom is located in the centre of the cluster. 4 crystallizes in the space group C2/c with four formula units per unit cell. The lattice constants at 200 K are: a = 3 970.6(3), b = 1 648.90(16), c = 3 266.30(20) pm, β = 131,44(4)°. The reaction of [PdCl₂(PPh₃)₂] with Sb(SiMe₃)₃ yields [Pd₉Sb₆(PPh₃)₈] ( 5 ). 5 consists of a body centred cubic Pd₉-cluster. All of the cube faces are capped by μ₄-Sb-ligands. 5 crystallizes in the space group Pn3 with two formula units per unit cell. The lattice constants at 200 K are: a = b = c = 1 995.4(2) pm.     

Complexes of heteroscorpionate trispyrazolylborate ligands. Part VI. Carboxylate induced conversion of mono-ligand Tp′M(L) into bis-ligand Tp′2M complexes (M=Co(II) and Cu(II))

A series of homoleptic complexes of hexacoordinate cobalt(II) and copper(II) complexes with 3,5-disubstituted homo- and heteroscorpionate tris(pyrazolyl)borate anionic ligands (Tp′) were synthesized, i.e. bis[hydrotris(3-phenyl,5-methylpyrazol-1-yl)borato]cobalt(II), bis[hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3-methyl,5-phenylpyrazol-1-yl)borato]cobalt(II) and bis[hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3-methyl,5-phenylpyrazol-1-yl)borato]copper(II) and their structures were elucidated crystallographically. The complexes were also formed spontaneously during attempted metathesis of the corresponding Tp′M(NCS) complexes into Tp′M(OOCCH(OH)CH₃) complexes. In the case of the analogous conversion applied for the thiocyanato [hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3,5-dimethylpyrazol-1-yl)boratocobalt(II) complex with sodium carboxylates (lactate, pyruvate and 2-hydroxybutyrate), the cross-transfer of pyrazolyl residues between starting anionic ligands was observed resulting in formation of bis-ligand homo- and heteroleptic Tp′CoTp″ complexes, where Tp′, Tp″ were tris(pyrazolyl)borates composed of n 3(5)-phenyl,5(3)-methylpyrazolyl and (3−n) 3,5-dimethylpyrazolyl residues (n=0–3) identified by mass spectrometry. Metathesis of thiocyanate in thiocyanato hydrotris(3-phenyl,5-methylpyrazol-1-yl)boratocobalt(II) into pyruvate led to the isolation of stable the pyruvato hydrotris(3-phenyl,5-methylpyrazol-1-yl)boratocobalt(II) complex, the structure of which was determined crystallographically. The Tp′ ligands are η³ coordinated to metal ions in every case, whereas the pyruvate anion is coordinated through carboxylate and carbonyl oxygen atoms to the cobalt center. Two rotational isomers distinguishable by ¹H NMR spectroscopy for the hexacoordinate bis[hydrobis(3-phenyl,5-methylpyrazol-1-yl)(3-methyl,5-phenylpyrazol-1-yl)borato]cobalt(II) complex were detected in solution.     

Phosphaniminato-Trichloroselenate(II): Synthese und Kristallstrukturen von [SeCl(NPPh3)2]+SeCl3− und [Me3SiN(H)PMe3]2+[Se2Cl6]2−

Phosphorane Iminato-Trichloroselenates(II): Syntheses and Crystal Structures of [SeCl(NPPh₃)₂]⁺SeCl₃^? and [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? [SeCl(NPPh₃)₂]⁺SeCl₃^? has been synthesized by the reaction of Se₂Cl₂ with Me₃SiNPPh₃ in acetonitrile solution, forming orangered crystals, whereas red crystals of [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? were obtained by the reaction of Me₃SiNPMe₃ with SeOCl₂ in acetonitrile solution. Both complexes were characterized by X-ray structure determinations. [SeCl(NPPh₃)₂]⁺SeCl₃^?: Space group P2₁/n, Z = 4, structure solution with 7 489 observed unique reflections, R = 0.057. Lattice dimensions at ?60°C: a = 1 117.0; b = 2 241, c = 1 407.5 pm, β = 95.61°. In the cation [SeCl(NPPh₃)₂]⁺ the selenium atom is φ-tetrahedrally coordinated by the chlorine atom and by the nitrogen atoms of the phosphorane iminato ligands, whereas the anion SeCl₃^? has a T-shaped structure with φ-trigonal-bipyramidale surrounding of the selenium atom. [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2?: Space group P2₁/c, Z = 4, structure solution with 2 093 observed unique reflections, R = 0.080. Lattice dimensions at ?70°C: a = 956, b = 828, c = 1 973 pm, β = 93.80°. The structure consists of [Me₃SiN(H)PMe₃]⁺ ions and planar [Se₂Cl₆]^2? anions, in which the selenium atoms are bridged nearly symmetrically by two chlorine atoms.     

Synthese und Kristallstrukturen der Phosphaniminato-Komplexe [MCl2(NPPh3)]2 mit M = Al und Ga, [SbCl2(NPMe3)(DMF)]2 sowie des Phosphanimin-Komplexes [Ph3PNH · BF3] · THF

Syntheses and Crystal Structures of the Phosphorane Iminato Complexes [MCl₂(NPPh₃)]₂ with M = Al and Ga, [SbCl₂(NPMe₃)(DMF)]₂, and of the Phosphorane Imine Complex [Ph₃PNH · BF₃] · THF The phosphorane iminato complexes [MCl₂(NPPh₃)]₂ with M = Al and Ga and [SbCl₂(NPMe₃)(DMF)]₂ are formed as colourless crystals by reactions of the anhydrous trichlorides MCl₃ (M = Al, Ga, Sb) with the corresponding silylated phosphorane imines Me₃SiNPR₃ in acetonitrile and in dimethyl formamide, respectively. The phosphorane imine derivative [Ph₃PNH · BF₃] · THF is formed from Me₃SiNPPh₃ and boron trifluoride etherate in boiling tetrahydrofuran. The compounds are characterized by their i. r. spectra and by crystal structure analyses. [AlCl₂(NPPh₃)]₂ : Space group P1 , Z = 1, structure solution with 1 585 observed unique reflections, R = 0.061. Lattice dimensions at ?70°C: a = 917.6, b = 1 053.5, c = 1 145.2 pm, α = 111.72°, β = 100.80°, γ = 109.95°. [GaCl₂(NPPh₃)]₂ : Space group P1 , Z = 1, structure solution with 2 586 observed unique reflections, R = 0.066. Lattice dimensions at ?70°C: a = 917.5, b = 1 058.3, c = 1 153.7 pm, α = 105.52°, β = 107.75°, γ = 109.88°. In both compounds the metal atoms are linked to planar M₂N₂ four-membered rings via the N-atoms of the phosphorane iminato groups. [SbCl₂(NPMe₃)(DMF)]₂ : Space group P2₁/n, Z = 4, structure solution with 3 805 observed unique reflections, R = 0.038. Lattice dimensions at ?70°C: a = 1 913.0, b = 726.8, c = 2 040.7 pm, β = 113.62°. The unit cell contains two symmetry independent dimeric molecules, in which the antimony atoms are centrosymmetricly μ₂ linked via the N-atoms of the phosphorane iminato groups. Along with the oxygen atom of the dimethyl formamide molecule the Sb atoms achieve a ψ-octahedral environment. [Ph₃PNH · BF₃] · THF : Space group C2/c, Z = 8, structure solution with 2 048 observed unique reflections, R = 0.058. Lattice dimensions at ?70°C: a = 2 460.4, b = 869.2, c = 1 978.0 pm, β = 116.35°.     

Reaktionen von MoNCl3 und WNCl3 mit elementarem Fluor. Kristallstrukturen von [MoO2F2(THF)2] und [WF4(NCl)(CH3CN)]

Reactions of MoNCl₃ and WNCl₃ with Elemental Fluorine. Crystal Structures of [MoO₂F₂(THF)₂] and [WF₄(NCl)(CH₃CN)] The nitrido chlorides MoNCl₃ and WNCl₃ as well as WCl₄(NCl) react with elemental fluorine forming the N-chloro imido complexes MoF₄(NCl) and WF₄(NCl), which were characterized by IR spectroscopy. With tetrahydrofurane MoF₄(NCl) reacts to give [MoF₄(NCl)(THF)], which in THF solution slowly converts into [MoO₂F₂(THF)₂]. From WF₄(NCl) with acetonitrile the complex [WF₄(NCl)(CH₃CN)] is obtained. Both donor acceptor complexes were characterized by crystal structure determinations. [MoO₂F₂(THF)₂] : Space group P2₁/n, Z = 4, structure solution with 1823 unique reflections, R = 0.033 for reflections with I > 2σ(I). Lattice dimensions at ?40°C: a = 636.2, b = 1119.5, c = 1625.2 pm; β = 93.92(1)º. The compound has a monomeric molecular structure with the fluorine atoms in trans-position to one another and with the oxygen atoms of the THF molecules in trans to the oxo ligands. [WF₄(NCl)(CH₃CN)] : Space group P2₁/m, Z = 2, structure solution with 1119 unique reflections, R = 0.038 for reflections with I > 2σ(I). Lattice dimensions at 20°C: a = 511.7, b = 714.9, c = 1002.5 pm; β = 102.59(10)º. The compound has a monomeric molecular structure in which the nitrogen atom of the acetonitrile molecule coordinates in trans-position to the N-chloro imido group W?N? Cl. The structural parameters of this group are WN = 172.2 pm, NCl = 161.1 pm, WNCl = 178.6º.     

Dispersion and deposition mechanisms of particles suspended in a turbulent plane Couette flow

Inertial particle transfer in a turbulent plane Couette flow (C flow) was studied using Direct Numerical Simulation (DNS) of the flow combined with a Lagrangian particle tracking approach for particles with Stokes numbers (St) 5, 25 and 125. The particle concentration was assumed low enough, so that the simulations were done under one-way coupling condition.