High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 1

With the simultaneous development of blank aluminum clad flexible fused silica glass capillary tubing capable of withstanding temperatures up to 500°C, coincident with a series of special high temperature methyl polysiloxane polymers, it was possible to produce for the first time, long lived fused silica capillary columns containing thin films of thermostable stationary phases which could be maintained isothermally at 400425°C and temperature programmed to 425–440°C. The “bleed rate” here for a well conditioned column was 5 picoamperes or less. Under these circumstances, alkanes with carbon numbers in the C-90 to C-100 area were rapidly and efficiently eluted from these columns. By extrapolation here, one can easily detect certain compounds with boiling points in the 750°C range. Since this type of capillary column was found to possess certain favorable properties, it was thought that it will soon replace the packed column and will probably be more popular than the borosilicate capillary column for many high temperature applications. Moreover, evidence has now accumulated which leads us to further believe that the majority of analyses of “high molecular weight” compounds performed by Supercritical Fluid Chromatography (SFC), utilizing very narrow bore fused silica capillary columns at several hundred atmospheres, can be much more simply, much more rapidly, much more economically, and much more efficiently accomplished by gas chromatography utilizing this new generation of high temperature capillary columns.     

Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.     

Preparation and Porous Property of C14-Monolithic Column for Capillary Electrochromatography

Capillary electrochromatography (CEC) has been performed with a series of C₁₄, methlyacrylamide based monolithic columns. These monoliths with different porosities were prepared by in-situ copolymerization in fused-silica capillaries. The porous properties of monoliths were further observed using scanning electron micrographs (SEM) and measured using a mercury porosimeter. The effect of various alcohols as porogens on porous structural properties and chromatographic behaviors were also investigated. The effects of organic additive, pH value and ionic strength in mobile phase on electroosmosis flow (EOF) and separation were further discussed. Meanwhile, the baseline separation of 6 neutral compounds can be well obtained. In addition, the monolithic column demonstrates the high column efficiency and satisfactory reproducibility.Acknowledgements We gratefully acknowledge the support of the National Natural Science Foundation of China.     

Deactivation,coating and performance of nickel capillary columns for GLC

Electroformed nickel tubing was deactivated by chemical vapor deposition of silicon from silane gas and subsequent treatment with cyclooctamethyltetrasiloxane (D4). Standard activity tests performed on the uncoated tube and also on columns coated with crosslinked and uncrosslinked, nonpolar stationary phase, show that good quality flexible columns can be prepared from nickel tubing. The inner surface of the silicon coated tube was characterized by Auger depth profile analysis.     

Rapid determination of organochlorine pesticide residues in feeds by capillary gas chromatography

A simple micro-method is described for determination of 15 organochlorine pesticide residues in mixed feeds. Clean-up of the petroleum ether extract is by basic alumina minicolumn chromatography and quantitative identification is by capillary gas chromatography with electron capture detection. Cyanopropyl-polysiloxane chemically bonded fused silica capillary columns have been used to perform high resolution analyses in short time as well as to overcome possible interferences by PCBs. Recovery, repeatability, and detection limits of the proposed procedure are checked and results are also reported for non random samples of 180 feeds collected in Italy.     

Identification of oxygenated polycyclic aromatic hydrocarbons in diesel particulate matter by capillary gas chromatography and capillary gas chromatography/mass spectrometry

Summary Using a two-step liquid chromatographic separation on normalphase cartridges, crude extracts of diesel particulate matter can be separated without time-consuming sample handling into special fractions which mainly contain slightly-polar oxygenated polycyclic aromatic hydrocarbons (oxy-PAH) and nitrated polycyclic aromatic hydrocarbons (nitro-PAH). Subsequent analysis was by fused-silica capillary gas chromatography on a SE54 column along with flame-ionisation (GC/FID) and positive-ion electron-impact mass spectrometric detection (GC/MS) respectively. A number of individual oxy-PAH belonging to four different chemical classes (ketones, quinones, anhydrides and aldehydes) and several individual nitro-PAH were characterized by their retention times and mass spectra. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

A model for quantitatively describing linear velocity programming in capillary SFC

Summary Linear velocity in capillary SFC is commonly controlled by restricting capillaries. In this paper, a model is described that quantitatively predicts the linear velocity of a supercritical fluid in SFC using tapered or ceramic frittype restrictors. In this model, the flow from the restricting capillary is assumed to be an isentropic expansion. The variation of the linear velocity as a function of pressure, temperature and cross-sectional area of the restricting aperture was predicted by this model. This predictive capability is important to the use of gradient programming in capillary SFC. Finally, the ideal variable restrictor for gradient programming was found to be one that could reversibly increase or decrease the linear velocity independent of the pressure, temperature, and/or density conditions used to create the gradient.     

PoraPLOT Q: A porous layer open tubular column coated with styrene-divinylbenzene copolymer

A porous polymer is deposited on the inner wall of fused silica capillary columns. The retention characteristics of this porous polymer were evaluated and found to be comparable with Porapak Q. The porous polymer has a high retention volume which enables the separation of permanent gases at ambient temperatures or higher. The hydrophobic character of the porous polymer allows the injection of water containing samples without changing retention due to adsorption of water. The inertness of the porous polymer allows the elution of a range of apolar and polar compounds. The maximum temperature of the porous polymer was estimated to be 250°C. With this new type of capillary column, high resolution separations are obtained in combination with short analysis times.     

Temperature dependence of the resolution of diastereomeric isoprenoids in capillary GC. Experiments with 50 μm, 100 μm,and 250 μm i.d. Columns

The resolution of the diastereoisomers of norpristane, pristane, and phytane was studied as a function of the column internal diameter and/or the residence time of the compounds in the column. Increasing the residence time in the column by operating the column at a lower temperature program rate enhances the resolution more than reducing the internal diameter of the column. Practical experience with ultra narrow bore columns is also presented.